qmk-firmware/keyboards/singa/rules.mk

# MCU name
MCU = atmega32a

# Bootloader selection
BOOTLOADER = bootloadhid

# Build Options
#   change yes to no to disable
#
BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite
MOUSEKEY_ENABLE = yes
EXTRAKEY_ENABLE = yes
CONSOLE_ENABLE = no
COMMAND_ENABLE = yes
BACKLIGHT_ENABLE = yes
RGBLIGHT_ENABLE = yes
WS2812_DRIVER = i2c
Adding Singa Repo w/ Config Support (#3155) * Adding Singa Repo w/ Config Support * Used Tilde instead of GRV * PR Fixes * oops, forgot to change the keymaps * splitbs -> split_bs 2018-06-10 04:25:22 +08:00			`# MCU name`
			`MCU = atmega32a`

Cleanup rules.mk for 32A and 328P keyboards (#6767) 2019-09-21 13:06:32 +08:00			`# Bootloader selection`
Change USBasp and bootloadHID bootloaders to lowercase (#14354) 2021-09-10 15:17:54 +08:00			`BOOTLOADER = bootloadhid`
Adding Singa Repo w/ Config Support (#3155) * Adding Singa Repo w/ Config Support * Used Tilde instead of GRV * PR Fixes * oops, forgot to change the keymaps * splitbs -> split_bs 2018-06-10 04:25:22 +08:00
Fix up build options comments (#15463) 2021-12-13 10:05:37 +08:00			`# Build Options`
			`# change yes to no to disable`
			`#`
Remove Full Bootmagic (#13846) * disambiguate Bootmagic rules in keymaps The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic. This commit edits the files to specify that full Bootmagic is intended. * remove BOOTMAGIC_ENABLE=full setting * unify commented BOOTMAGIC_ENABLE rules in keyboards Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;#[ \t]\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).;\1 = no # Virtual DIP switch configuration;g' {} + ``` * remove commented Bootmagic rules from keymap/user level Command: ``` find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\)./d' {} + ``` * update keyboard BOOTMAGIC_ENABLE rule formatting Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later). Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).;\1 = \2;g' '{}' + ``` update keyboards' BOOTMAGIC_ENABLE settings Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' + ``` * update keymap/user BOOTMAGIC_ENABLE settings Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '/keymaps/' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + ``` * remove and replace inline comments in keyboards and keymap/user files Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '/keymaps/' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).;\1 = \2;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).;\1 = \2;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' + ``` * rename improperly named makefiles Some files intended to be used as makefiles had improper names causing them to not be used as intended when building. This commit corrects the filenames of the affected files. * update renamed file with new rule formatting * update QMK's template files Updates QMK's `rules.mk` templates to use the new inline comment. * update QMK Docs - remove documentation of full Bootmagic - update links to Bootmagic Lite doc - add doc for Magic Keycodes * rules.mk patch for coarse/ixora and coarse/vinta 2021-08-07 14:59:56 +08:00			`BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite`
Adding Singa Repo w/ Config Support (#3155) * Adding Singa Repo w/ Config Support * Used Tilde instead of GRV * PR Fixes * oops, forgot to change the keymaps * splitbs -> split_bs 2018-06-10 04:25:22 +08:00			`MOUSEKEY_ENABLE = yes`
			`EXTRAKEY_ENABLE = yes`
Remove custom backlight code for PS2AVRGB boards (#7775) * Remove custom backlight code for PS2AVRGB boards * Remove custom driver setting * BACKLIGHT_BREATHING goes in config.h, not here * Don't need to include backlight.c again here either * Turn on backlight for Canoe * Disable console on a few boards due to oversize 2020-01-19 15:00:32 +08:00			`CONSOLE_ENABLE = no`
Adding Singa Repo w/ Config Support (#3155) * Adding Singa Repo w/ Config Support * Used Tilde instead of GRV * PR Fixes * oops, forgot to change the keymaps * splitbs -> split_bs 2018-06-10 04:25:22 +08:00			`COMMAND_ENABLE = yes`
[Keyboard] Refactor Singa (#5579) * pragma once it all * put amnesia's name everywhere * fixup readme * remove custom matrix * remove unneccessary configs * disable bootmagic * remove custom i2c in favor of i2c_master * fix rgb led num * add in rgb underglow support 2019-04-09 01:55:36 +08:00			`BACKLIGHT_ENABLE = yes`
			`RGBLIGHT_ENABLE = yes`
Convert some PS2AVRGB boards to I2C WS2812 driver (#7241) * Convert some PS2AVRGB boards to I2C WS2812 driver * Fix Travis failure for bface 2019-11-05 08:05:03 +08:00			`WS2812_DRIVER = i2c`