Set the correct RGB LED count on YD60MQ (#8629)

* Fix RGB LED count on YD60MQ

* Split YD60MQ into 12-LED and 16-LED revisions

* Update readmes

* Make 12led the default version

* Readd base rules.mk, version→variant in readme

* Add syntax highlighting to code blocks in readme

keyboards/yd60mq/12led/config.h

@@ -0,0 +1,5 @@
+#pragma once
+
+#define DEVICE_VER 0x0001
+
+#define RGBLED_NUM 12

keyboards/yd60mq/12led/readme.md

@@ -0,0 +1,3 @@
+# YD60MQ – 12 LED
+
+Code specific to the YD60MQ variant with 12 RGB LEDs on the back (unknown revision number).

keyboards/yd60mq/16led/config.h

@@ -0,0 +1,5 @@
+#pragma once
+
+#define DEVICE_VER 0x0002
+
+#define RGBLED_NUM 16

keyboards/yd60mq/16led/readme.md

@@ -0,0 +1,3 @@
+# YD60MQ – 16 LED
+
+Code specific to the YD60MQ variant with 16 RGB LEDs on the back (unknown revision number).

keyboards/yd60mq/config.h

@@ -5,7 +5,6 @@
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0xFEED
 #define PRODUCT_ID      0x6060
-#define DEVICE_VER      0x0001
 #define MANUFACTURER    YMDK
 #define PRODUCT         YD60MQ
 #define DESCRIPTION     Keyboard
@@ -37,10 +36,8 @@
 /* prevent stuck modifiers */
 
 #define RGB_DI_PIN E2
-#ifdef RGB_DI_PIN
 #define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 12
 #define RGBLIGHT_HUE_STEP 8
 #define RGBLIGHT_SAT_STEP 8
 #define RGBLIGHT_VAL_STEP 8
-#endif
+// RGBLED_NUM is defined in revisions

keyboards/yd60mq/readme.md

@@ -5,15 +5,25 @@
 Customizable 60% PCB by [YMDK](https://ymdk.aliexpress.com/store/429151?spm=2114.10010108.0.0.3ab23641lIkgzm).
 
 * Keyboard Maintainer: QMK Community
-* Hardware Supported: YD60MQ PCB, ATmega32U4
+* Hardware Supported: YD60MQ PCB
+    * 12led (unknown revision number, has 12 RGB LEDs on the back) – _default variant_
+    * 16led (unknown revision number, has 16 RGB LEDs on the back)
 * Hardware Availability: [YMDK on AliExpress](https://www.aliexpress.com/i/32869207240.html)
 
 Make example for this keyboard (after setting up your build environment):
 
-    make yd60mq:default
+```sh
+make yd60mq:default        # builds the 12 LED variant
+make yd60mq/12led:default  # also builds the 12 LED variant
+make yd60mq/16led:default  # builds the 16 LED variant
+```
 
 The keyboard uses a DFU bootloader. To make a keymap and use dfu to flash it:
 
-    make yd60mq:default:flash
+```sh
+make yd60mq:default:flash        # builds and flashes the 12 LED variant
+make yd60mq/12led:default:flash  # also builds and flashes the 12 LED variant
+make yd60mq/16led:default:flash  # builds and flashes the 16 LED variant
+```
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/yd60mq/rules.mk

@@ -32,3 +32,5 @@ FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
 HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
 
 LAYOUTS = 60_ansi
+
+DEFAULT_FOLDER = yd60mq/12led

keyboards/yd60mq/yd60mq.c

@@ -1,10 +1,12 @@
 #include "yd60mq.h"
 
+__attribute__((weak))
 void matrix_init_kb(void){
     setPinOutput(F4);
     writePinHigh(F4);
 }
 
+__attribute__((weak))
 bool led_update_kb(led_t led_state) {
     bool res = led_update_user(led_state);
     if (res) {