mirror of
https://github.com/firewalkwithm3/qmk_firmware.git
synced 2024-11-22 03:21:48 +08:00
[Keyboard] Add keyboard reviung53 (#15390)
* add keyboards/reviung53/ * modified: keyboards/reviung53/rules.mk * modified: keyboards/reviung53/keymaps/default/keymap.c, keyboards/reviung53/keymaps/via/keymap.c * modified: keyboards/reviung53/readme.md * modified: keyboards/reviung53/config.h
This commit is contained in:
gtips
GitHub
parent
93bc737a8f
commit
7d15bc7a92
138
keyboards/reviung53/config.h
Normal file
138
keyboards/reviung53/config.h
Normal file
|
|
@ -0,0 +1,138 @@
|
|||
// Copyright 2021 gtips (@gtips)
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0x4E94
|
||||
#define PRODUCT_ID 0x4E09
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER gtips
|
||||
#define PRODUCT reviung53
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 7
|
||||
#define MATRIX_COLS 8
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { D0, D4, C6, D7, E6, B4, B5 }
|
||||
#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW, ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/*
|
||||
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
|
||||
*/
|
||||
// #define SOFT_SERIAL_PIN D0
|
||||
|
||||
//#define LED_NUM_LOCK_PIN B0
|
||||
//#define LED_CAPS_LOCK_PIN B1
|
||||
//#define LED_SCROLL_LOCK_PIN B2
|
||||
//#define LED_COMPOSE_PIN B3
|
||||
//#define LED_KANA_PIN B4
|
||||
|
||||
//#define BACKLIGHT_PIN B7
|
||||
//#define BACKLIGHT_LEVELS 3
|
||||
//#define BACKLIGHT_BREATHING
|
||||
|
||||
#define RGB_DI_PIN D3
|
||||
#ifdef RGB_DI_PIN
|
||||
#define RGBLED_NUM 10
|
||||
#define RGBLIGHT_HUE_STEP 16
|
||||
#define RGBLIGHT_SAT_STEP 16
|
||||
#define RGBLIGHT_VAL_STEP 16
|
||||
#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
|
||||
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
|
||||
/*== all animations enable ==*/
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
/*== or choose animations ==*/
|
||||
//# define RGBLIGHT_EFFECT_BREATHING
|
||||
//# define RGBLIGHT_EFFECT_RAINBOW_MOOD
|
||||
//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
|
||||
//# define RGBLIGHT_EFFECT_SNAKE
|
||||
//# define RGBLIGHT_EFFECT_KNIGHT
|
||||
//# define RGBLIGHT_EFFECT_CHRISTMAS
|
||||
//# define RGBLIGHT_EFFECT_STATIC_GRADIENT
|
||||
//# define RGBLIGHT_EFFECT_RGB_TEST
|
||||
//# define RGBLIGHT_EFFECT_ALTERNATING
|
||||
/*== customize breathing effect ==*/
|
||||
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
|
||||
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
|
||||
/*==== use exp() and sin() ====*/
|
||||
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
|
||||
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
|
||||
#endif
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
|
||||
* This is useful for the Windows task manager shortcut (ctrl+shift+esc).
|
||||
*/
|
||||
//#define GRAVE_ESC_CTRL_OVERRIDE
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
|
||||
/* disable these deprecated features by default */
|
||||
#define NO_ACTION_MACRO
|
||||
#define NO_ACTION_FUNCTION
|
||||
|
||||
/* Bootmagic Lite key configuration */
|
||||
//#define BOOTMAGIC_LITE_ROW 0
|
||||
//#define BOOTMAGIC_LITE_COLUMN 0
|
||||
68
keyboards/reviung53/info.json
Normal file
68
keyboards/reviung53/info.json
Normal file
|
|
@ -0,0 +1,68 @@
|
|||
{
|
||||
"keyboard_name": "reviung53",
|
||||
"url": "",
|
||||
"maintainer": "gtips",
|
||||
"layouts": {
|
||||
"LAYOUT_reviung53": {
|
||||
"layout": [
|
||||
{"label": "k02", "x":2.25, "y":0},
|
||||
{"label": "k03", "x":3.5, "y":0},
|
||||
{"label": "k04", "x":4.5, "y":0},
|
||||
{"label": "k05", "x":5.5, "y":0},
|
||||
{"label": "k06", "x":6.5, "y":0},
|
||||
{"label": "k07", "x":7.75, "y":0},
|
||||
{"label": "k40", "x":8.75, "y":0},
|
||||
{"label": "k41", "x":9.75, "y":0},
|
||||
{"label": "k42", "x":10.75, "y":0},
|
||||
{"label": "k43", "x":12, "y":0},
|
||||
|
||||
{"label": "k10", "x":0, "y":1.25, "w":1.5},
|
||||
{"label": "k11", "x":1.5, "y":1.25},
|
||||
{"label": "k12", "x":2.5, "y":1.25},
|
||||
{"label": "k13", "x":3.5, "y":1.25},
|
||||
{"label": "k14", "x":4.5, "y":1.25},
|
||||
{"label": "k15", "x":5.5, "y":1.25},
|
||||
{"label": "k16", "x":6.5, "y":1.25},
|
||||
{"label": "k17", "x":7.5, "y":1.25},
|
||||
{"label": "k44", "x":8.5, "y":1.25},
|
||||
{"label": "k45", "x":9.5, "y":1.25},
|
||||
{"label": "k46", "x":10.5, "y":1.25},
|
||||
{"label": "k47", "x":11.5, "y":1.25, "w":1.5},
|
||||
|
||||
{"label": "k20", "x":0, "y":2.25, "w":1.75},
|
||||
{"label": "k21", "x":1.75, "y":2.25},
|
||||
{"label": "k22", "x":2.75, "y":2.25},
|
||||
{"label": "k23", "x":3.75, "y":2.25},
|
||||
{"label": "k24", "x":4.75, "y":2.25},
|
||||
{"label": "k25", "x":5.75, "y":2.25},
|
||||
{"label": "k26", "x":6.75, "y":2.25},
|
||||
{"label": "k27", "x":7.75, "y":2.25},
|
||||
{"label": "k50", "x":8.75, "y":2.25},
|
||||
{"label": "k51", "x":9.75, "y":2.25},
|
||||
{"label": "k52", "x":10.75, "y":2.25},
|
||||
{"label": "k53", "x":11.75, "y":2.25, "w":1.25},
|
||||
|
||||
{"label": "k30", "x":0, "y":3.25, "w":2.25},
|
||||
{"label": "k31", "x":2.25, "y":3.25},
|
||||
{"label": "k32", "x":3.25, "y":3.25},
|
||||
{"label": "k33", "x":4.25, "y":3.25},
|
||||
{"label": "k34", "x":5.25, "y":3.25},
|
||||
{"label": "k35", "x":6.25, "y":3.25},
|
||||
{"label": "k36", "x":7.25, "y":3.25},
|
||||
{"label": "k37", "x":8.25, "y":3.25},
|
||||
{"label": "k54", "x":9.25, "y":3.25},
|
||||
{"label": "k55", "x":10.25, "y":3.25},
|
||||
{"label": "k56", "x":11.25, "y":3.25, "w":1.75},
|
||||
|
||||
{"label": "k60", "x":0, "y":4.25, "w":1.5},
|
||||
{"label": "k61", "x":1.5, "y":4.25, "w":1.25},
|
||||
{"label": "k62", "x":2.75, "y":4.25, "w":1.25},
|
||||
{"label": "k63", "x":4, "y":4.25, "w":2.75},
|
||||
{"label": "k64", "x":6.75, "y":4.25, "w":2.25},
|
||||
{"label": "k65", "x":9, "y":4.25, "w":1.25},
|
||||
{"label": "k66", "x":10.25, "y":4.25, "w":1.25},
|
||||
{"label": "k67", "x":11.5, "y":4.25, "w":1.5}
|
||||
]
|
||||
}
|
||||
}
|
||||
}
|
||||
55
keyboards/reviung53/keymaps/default/keymap.c
Normal file
55
keyboards/reviung53/keymaps/default/keymap.c
Normal file
|
|
@ -0,0 +1,55 @@
|
|||
// Copyright 2021 gtips (@gtips)
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
// Defines names for use in layer keycodes and the keymap
|
||||
enum layer_names {
|
||||
_BASE,
|
||||
_LOWER,
|
||||
_RAISE,
|
||||
_ADJUST
|
||||
};
|
||||
|
||||
#define LOWER MO(_LOWER)
|
||||
#define RAISE MO(_RAISE)
|
||||
#define ADJUST MO(_ADJUST)
|
||||
|
||||
#define SF_SS RSFT_T(KC_SLSH)
|
||||
#define SP_LO LT(LOWER, KC_SPC)
|
||||
#define SP_RA LT(RAISE, KC_SPC)
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[_BASE] = LAYOUT_reviung53(
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_DEL,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, SF_SS,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, SP_LO, SP_RA, KC_LALT, KC_RGUI, KC_RCTL
|
||||
),
|
||||
[_LOWER] = LAYOUT_reviung53(
|
||||
KC_GESC, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_PAUS, KC_SLCK, KC_PSCR, _______,
|
||||
_______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
|
||||
_______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, XXXXXXX, KC_QUOT,
|
||||
_______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_HOME, KC_END, KC_PGUP, KC_PGDN, KC_SLSH,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______
|
||||
),
|
||||
[_RAISE] = LAYOUT_reviung53(
|
||||
KC_TILD, KC_F9, KC_F10, KC_F11, KC_F12, KC_MUTE, KC_VOLU, KC_VOLD, KC_MPLY, _______,
|
||||
_______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______,
|
||||
_______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_DQUO,
|
||||
_______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_QUES,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______
|
||||
),
|
||||
[_ADJUST] = LAYOUT_reviung53(
|
||||
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET,
|
||||
RGB_VAI, RGB_SAI, RGB_HUI, RGB_MOD, XXXXXXX, RGB_TOG, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
|
||||
RGB_VAD, RGB_SAD, RGB_HUD, RGB_RMOD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
|
||||
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
|
||||
XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX
|
||||
),
|
||||
};
|
||||
|
||||
layer_state_t layer_state_set_user(layer_state_t state) {
|
||||
return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
|
||||
}
|
||||
1
keyboards/reviung53/keymaps/default/readme.md
Normal file
1
keyboards/reviung53/keymaps/default/readme.md
Normal file
|
|
@ -0,0 +1 @@
|
|||
# The default keymap for reviung53
|
||||
55
keyboards/reviung53/keymaps/via/keymap.c
Normal file
55
keyboards/reviung53/keymaps/via/keymap.c
Normal file
|
|
@ -0,0 +1,55 @@
|
|||
// Copyright 2021 gtips (@gtips)
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
// Defines names for use in layer keycodes and the keymap
|
||||
enum layer_names {
|
||||
_BASE,
|
||||
_LOWER,
|
||||
_RAISE,
|
||||
_ADJUST
|
||||
};
|
||||
|
||||
#define LOWER MO(_LOWER)
|
||||
#define RAISE MO(_RAISE)
|
||||
#define ADJUST MO(_ADJUST)
|
||||
|
||||
#define SF_SS RSFT_T(KC_SLSH)
|
||||
#define SP_LO LT(LOWER, KC_SPC)
|
||||
#define SP_RA LT(RAISE, KC_SPC)
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[_BASE] = LAYOUT_reviung53(
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_DEL,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, SF_SS,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, SP_LO, SP_RA, KC_LALT, KC_RGUI, KC_RCTL
|
||||
),
|
||||
[_LOWER] = LAYOUT_reviung53(
|
||||
KC_GESC, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_PAUS, KC_SLCK, KC_PSCR, _______,
|
||||
_______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
|
||||
_______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, XXXXXXX, KC_QUOT,
|
||||
_______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_HOME, KC_END, KC_PGUP, KC_PGDN, KC_SLSH,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______
|
||||
),
|
||||
[_RAISE] = LAYOUT_reviung53(
|
||||
KC_TILD, KC_F9, KC_F10, KC_F11, KC_F12, KC_MUTE, KC_VOLU, KC_VOLD, KC_MPLY, _______,
|
||||
_______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______,
|
||||
_______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_DQUO,
|
||||
_______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_QUES,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______
|
||||
),
|
||||
[_ADJUST] = LAYOUT_reviung53(
|
||||
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET,
|
||||
RGB_VAI, RGB_SAI, RGB_HUI, RGB_MOD, XXXXXXX, RGB_TOG, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
|
||||
RGB_VAD, RGB_SAD, RGB_HUD, RGB_RMOD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
|
||||
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
|
||||
XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX
|
||||
),
|
||||
};
|
||||
|
||||
layer_state_t layer_state_set_user(layer_state_t state) {
|
||||
return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST);
|
||||
}
|
||||
3
keyboards/reviung53/keymaps/via/readme.md
Normal file
3
keyboards/reviung53/keymaps/via/readme.md
Normal file
|
|
@ -0,0 +1,3 @@
|
|||
# The default keymap for reviung53
|
||||
|
||||
For use with VIA configurator and compatible keymap editors.
|
||||
1
keyboards/reviung53/keymaps/via/rules.mk
Normal file
1
keyboards/reviung53/keymaps/via/rules.mk
Normal file
|
|
@ -0,0 +1 @@
|
|||
VIA_ENABLE = yes
|
||||
27
keyboards/reviung53/readme.md
Normal file
27
keyboards/reviung53/readme.md
Normal file
|
|
@ -0,0 +1,27 @@
|
|||
# reviung53
|
||||
|
||||
|
||||
|
||||
The REVIUNG53 is 53-key keyboard.
|
||||
|
||||
* Keyboard Maintainer: [gtips](https://github.com/gtips)
|
||||
* Hardware Supported: REVIUNG53 PCB.
|
||||
* Hardware Availability: [PCB & Case Data](https://github.com/gtips/reviung/tree/master/reviung53)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make reviung53:default
|
||||
|
||||
Flashing example for this keyboard:
|
||||
|
||||
make reviung53:default:flash
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
|
||||
## Bootloader
|
||||
|
||||
Enter the bootloader in 3 ways:
|
||||
|
||||
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
||||
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
||||
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
|
||||
4
keyboards/reviung53/reviung53.c
Normal file
4
keyboards/reviung53/reviung53.c
Normal file
|
|
@ -0,0 +1,4 @@
|
|||
// Copyright 2021 gtips (@gtips)
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
#include "reviung53.h"
|
||||
30
keyboards/reviung53/reviung53.h
Normal file
30
keyboards/reviung53/reviung53.h
Normal file
|
|
@ -0,0 +1,30 @@
|
|||
// Copyright 2021 gtips (@gtips)
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
/* This is a shortcut to help you visually see your layout.
|
||||
*
|
||||
* The first section contains all of the arguments representing the physical
|
||||
* layout of the board and position of the keys.
|
||||
*
|
||||
* The second converts the arguments into a two-dimensional array which
|
||||
* represents the switch matrix.
|
||||
*/
|
||||
#define LAYOUT_reviung53( \
|
||||
K02, K03, K04, K05, K06, K07, K40, K41, K42, K43, \
|
||||
K10, K11, K12, K13, K14, K15, K16, K17, K44, K45, K46, K47, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K50, K51, K52, K53, \
|
||||
K30, K31, K32, K33, K34, K35, K36, K37, K54, K55, K56,\
|
||||
K60, K61, K62, K63, K64, K65, K66, K67 \
|
||||
) { \
|
||||
{ KC_NO, KC_NO, K02, K03, K04, K05, K06, K07 }, \
|
||||
{ K10, K11, K12, K13, K14, K15, K16, K17 }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, K27 }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, K37 }, \
|
||||
{ K40, K41, K42, K43, K44, K45, K46, K47 }, \
|
||||
{ K50, K51, K52, K53, K54, K55, K56, KC_NO }, \
|
||||
{ K60, K61, K62, K63, K64, K65, K66, K67 } \
|
||||
}
|
||||
19
keyboards/reviung53/rules.mk
Normal file
19
keyboards/reviung53/rules.mk
Normal file
|
|
@ -0,0 +1,19 @@
|
|||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
BOOTLOADER = caterina
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
|
||||
MOUSEKEY_ENABLE = no # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = no # Console for debug
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE = no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
||||
AUDIO_ENABLE = no # Audio output
|
||||
Loading…
Reference in a new issue