mirror of
https://github.com/firewalkwithm3/qmk_firmware.git
synced 2024-11-22 19:40:29 +08:00
added omnikey_blackheart keyboard support (#2688)
* added omnikey_blackheart keyboard support * fixing omnikey_blackheart layout * fixing omnikey_blackheart NKRO
This commit is contained in:
blindassassin111
Jack Humbert
parent
8b0b17a369
commit
7dda7158fb
60
keyboards/omnikey_blackheart/config.h
Normal file
60
keyboards/omnikey_blackheart/config.h
Normal file
|
|
@ -0,0 +1,60 @@
|
|||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6060
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER blindassassin111
|
||||
#define PRODUCT Omnikey Blackheart PCB
|
||||
#define DESCRIPTION Teensy++ Board for Omnikey keyboards
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 6
|
||||
#define MATRIX_COLS 23
|
||||
|
||||
/* key matrix pins */
|
||||
#define MATRIX_ROW_PINS { B7, D0, D1, D2, D3, D4 }
|
||||
#define MATRIX_COL_PINS { C2, C3, C4, C7, C1, C0, E1, E0, D7, F7, F6, F5, F4, F3, F2, F1, F0, E6, E7, B0, B1, B2, B3 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* number of backlight levels */
|
||||
#ifdef BACKLIGHT_PIN
|
||||
#define BACKLIGHT_LEVELS 0
|
||||
#endif
|
||||
|
||||
/* Set 0 if debouncing isn't needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* key combination for command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
/* force n-key rollover*/
|
||||
#define FORCE_NKRO
|
||||
|
||||
/* prevent stuck modifiers */
|
||||
#define PREVENT_STUCK_MODIFIERS
|
||||
|
||||
|
||||
#ifdef RGB_DI_PIN
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGBLED_NUM 0
|
||||
#define RGBLIGHT_HUE_STEP 8
|
||||
#define RGBLIGHT_SAT_STEP 8
|
||||
#define RGBLIGHT_VAL_STEP 8
|
||||
#endif
|
||||
|
||||
#endif
|
||||
48
keyboards/omnikey_blackheart/keymaps/default/keymap.c
Normal file
48
keyboards/omnikey_blackheart/keymaps/default/keymap.c
Normal file
|
|
@ -0,0 +1,48 @@
|
|||
#include "omnikey_blackheart.h"
|
||||
|
||||
// Fillers to make layering more clear
|
||||
#define ______ KC_TRNS
|
||||
#define XXXXXX KC_NO
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[0] = KEYMAP(\
|
||||
KC_F11 , KC_F12 , KC_ESC , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , KC_F12 , KC_PSCR , KC_SLCK , KC_PAUS ,
|
||||
KC_F1 , KC_F2 , KC_GRV , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , KC_MINS , KC_EQL , KC_BSPC , KC_INS , KC_HOME , KC_PGUP , KC_NLCK , KC_PSLS, KC_PAST, KC_PMNS,
|
||||
KC_F3 , KC_F4 , KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_LBRC , KC_RBRC , KC_BSLS , KC_DEL , KC_END , KC_PGDN , KC_P7 , KC_P8 , KC_P9 , KC_PPLS,
|
||||
KC_F5 , KC_F6 , KC_CAPS , KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN , KC_QUOT , KC_ENT , XXXXXX , XXXXXX , XXXXXX , KC_P4 , KC_P5 , KC_P6 , KC_EQL,
|
||||
KC_F7 , KC_F8 , KC_LSFT , KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM , KC_DOT , KC_SLSH , KC_RSFT , MO(1) , XXXXXX , KC_UP , XXXXXX , KC_P1 , KC_P2 , KC_P3 , KC_PENT,
|
||||
KC_F9 , KC_F10 , KC_LCTL , KC_LGUI , KC_LALT , XXXXXX , KC_SPC , KC_RALT , KC_RGUI , KC_RCTL , XXXXXX , KC_LEFT , KC_DOWN , KC_RIGHT, KC_P0 , KC_PDOT
|
||||
),
|
||||
|
||||
[1] = KEYMAP(\
|
||||
KC_F11 , KC_F12 , KC_ESC , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , KC_F12 , KC_PSCR , KC_SLCK , KC_PAUS ,
|
||||
KC_F1 , KC_F2 , RESET , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , KC_MINS , KC_EQL , KC_BSPC , KC_INS , KC_HOME , KC_PGUP , KC_NLCK , KC_PSLS, KC_PAST, KC_PMNS,
|
||||
KC_F3 , KC_F4 , KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_LBRC , KC_RBRC , KC_BSLS , KC_DEL , KC_END , KC_PGDN , KC_P7 , KC_P8 , KC_P9 , KC_PPLS,
|
||||
KC_F5 , KC_F6 , KC_CAPS , KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN , KC_QUOT , KC_ENT , XXXXXX , XXXXXX , XXXXXX , KC_P4 , KC_P5 , KC_P6 , KC_EQL,
|
||||
KC_F7 , KC_F8 , KC_LSFT , KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM , KC_DOT , KC_SLSH , KC_RSFT , ______ , XXXXXX , KC_UP , XXXXXX , KC_P1 , KC_P2 , KC_P3 , KC_PENT,
|
||||
KC_F9 , KC_F10 , KC_LCTL , KC_LGUI , KC_LALT , XXXXXX , KC_SPC , KC_RALT , KC_RGUI , KC_RCTL , XXXXXX , KC_LEFT , KC_DOWN , KC_RIGHT, KC_P0 , KC_PDOT
|
||||
),
|
||||
};
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
DDRB |= (1 << 4) | (1 << 5) | (1 << 6);
|
||||
|
||||
if (usb_led & (1 << USB_LED_NUM_LOCK)) {
|
||||
PORTB |= (1 << 4);
|
||||
} else {
|
||||
PORTB &= ~(1 << 4);
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
|
||||
PORTB |= (1 << 5);
|
||||
} else {
|
||||
PORTB &= ~(1 << 5);
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
|
||||
PORTB |= (1 << 6);
|
||||
} else {
|
||||
PORTB &= ~(1 << 6);
|
||||
}
|
||||
}
|
||||
1
keyboards/omnikey_blackheart/omnikey_blackheart.c
Normal file
1
keyboards/omnikey_blackheart/omnikey_blackheart.c
Normal file
|
|
@ -0,0 +1 @@
|
|||
#include "omnikey_blackheart.h"
|
||||
22
keyboards/omnikey_blackheart/omnikey_blackheart.h
Normal file
22
keyboards/omnikey_blackheart/omnikey_blackheart.h
Normal file
|
|
@ -0,0 +1,22 @@
|
|||
#ifndef omnikey_blackheart
|
||||
#define omnikey_blackheart
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#define KEYMAP( \
|
||||
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, K017, \
|
||||
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, K117, K118, K119, K120, K121, K122, \
|
||||
K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, K217, K218, K219, K220, K221, K222, \
|
||||
K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316, K317, K318, K319, K320, K321, \
|
||||
K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414, K415, K416, K417, K418, K419, K420, K421, \
|
||||
K500, K501, K502, K503, K504, K505, K507, K512, K513, K514, K515, K516, K517, K518, K519, K520 \
|
||||
) { \
|
||||
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, K017, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
|
||||
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, K117, K118, K119, K120, K121, K122 }, \
|
||||
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, K217, K218, K219, K220, K221, K222 }, \
|
||||
{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316, K317, K318, K319, K320, K321, KC_NO }, \
|
||||
{ K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414, K415, K416, K417, K418, K419, K420, K421, KC_NO }, \
|
||||
{ K500, K501, K502, K503, K504, K505, KC_NO, K507, KC_NO, KC_NO, KC_NO, KC_NO, K512, K513, K514, K515, K516, K517, K518, K519, K520, KC_NO, KC_NO } \
|
||||
}
|
||||
|
||||
#endif
|
||||
14
keyboards/omnikey_blackheart/readme.md
Normal file
14
keyboards/omnikey_blackheart/readme.md
Normal file
|
|
@ -0,0 +1,14 @@
|
|||
Omnikey Blackheart PCB
|
||||
===
|
||||
|
||||
A replacement PCB for Omnikey keyboards. Supports 101, 102, Plus, Ultra T, Ultra, Prime and Stellar, as well as customs.
|
||||
|
||||
Keyboard Maintainer: QMK Community and blindassassin111
|
||||
Hardware Supported: Omnikey blackheart PCB
|
||||
Hardware Availability: https://deskthority.net/group-buys-f50/omnikey-replacement-pcb-t18276.html
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make omnikey_blackheart:default
|
||||
|
||||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
|
||||
56
keyboards/omnikey_blackheart/rules.mk
Normal file
56
keyboards/omnikey_blackheart/rules.mk
Normal file
|
|
@ -0,0 +1,56 @@
|
|||
# MCU name
|
||||
MCU = at90usb1286
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= no # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= no # Commands for debug and configuration
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality
|
||||
AUDIO_ENABLE ?= no
|
||||
RGBLIGHT_ENABLE ?= no
|
||||
Loading…
Reference in a new issue