mirror of
https://github.com/firewalkwithm3/qmk_firmware.git
synced 2024-11-22 11:30:30 +08:00
Prune out pure software pwm && custom driver && remove wrapping BACKLIGHT_PIN (#8041)
This commit is contained in:
Joel Challis
GitHub
parent
3dc061ac78
commit
88356c85c4
|
|
@ -2,7 +2,9 @@
|
|||
#include "backlight.h"
|
||||
#include "debug.h"
|
||||
|
||||
#if defined(BACKLIGHT_ENABLE) && (defined(BACKLIGHT_PIN) || defined(BACKLIGHT_PINS))
|
||||
#if !defined(BACKLIGHT_PIN) && !defined(BACKLIGHT_PINS)
|
||||
# error "Backlight pin/pins not defined. Please configure."
|
||||
#endif
|
||||
|
||||
// This logic is a bit complex, we support 3 setups:
|
||||
//
|
||||
|
|
@ -12,7 +14,7 @@
|
|||
// depends on the Audio setup (Audio wins over Backlight).
|
||||
// 3. Full software PWM, driven by the matrix scan, if both timers are used by Audio.
|
||||
|
||||
# if (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__)) && (BACKLIGHT_PIN == B5 || BACKLIGHT_PIN == B6 || BACKLIGHT_PIN == B7)
|
||||
#if (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__)) && (BACKLIGHT_PIN == B5 || BACKLIGHT_PIN == B6 || BACKLIGHT_PIN == B7)
|
||||
# define HARDWARE_PWM
|
||||
# define ICRx ICR1
|
||||
# define TCCRxA TCCR1A
|
||||
|
|
@ -34,7 +36,7 @@
|
|||
# define COMxx1 COM1C1
|
||||
# define OCRxx OCR1C
|
||||
# endif
|
||||
# elif (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__)) && (BACKLIGHT_PIN == C4 || BACKLIGHT_PIN == C5 || BACKLIGHT_PIN == C6)
|
||||
#elif (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__)) && (BACKLIGHT_PIN == C4 || BACKLIGHT_PIN == C5 || BACKLIGHT_PIN == C6)
|
||||
# define HARDWARE_PWM
|
||||
# define ICRx ICR3
|
||||
# define TCCRxA TCCR3A
|
||||
|
|
@ -64,7 +66,7 @@
|
|||
# define COMxx1 COM3A1
|
||||
# define OCRxx OCR3A
|
||||
# endif
|
||||
# elif (defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__)) && (BACKLIGHT_PIN == B7 || BACKLIGHT_PIN == C5 || BACKLIGHT_PIN == C6)
|
||||
#elif (defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__)) && (BACKLIGHT_PIN == B7 || BACKLIGHT_PIN == C5 || BACKLIGHT_PIN == C6)
|
||||
# define HARDWARE_PWM
|
||||
# define ICRx ICR1
|
||||
# define TCCRxA TCCR1A
|
||||
|
|
@ -86,7 +88,7 @@
|
|||
# define COMxx1 COM1A1
|
||||
# define OCRxx OCR1A
|
||||
# endif
|
||||
# elif defined(__AVR_ATmega32A__) && (BACKLIGHT_PIN == D4 || BACKLIGHT_PIN == D5)
|
||||
#elif defined(__AVR_ATmega32A__) && (BACKLIGHT_PIN == D4 || BACKLIGHT_PIN == D5)
|
||||
# define HARDWARE_PWM
|
||||
# define ICRx ICR1
|
||||
# define TCCRxA TCCR1A
|
||||
|
|
@ -104,7 +106,7 @@
|
|||
# define COMxx1 COM1A1
|
||||
# define OCRxx OCR1A
|
||||
# endif
|
||||
# elif defined(__AVR_ATmega328P__) && (BACKLIGHT_PIN == B1 || BACKLIGHT_PIN == B2)
|
||||
#elif defined(__AVR_ATmega328P__) && (BACKLIGHT_PIN == B1 || BACKLIGHT_PIN == B2)
|
||||
# define HARDWARE_PWM
|
||||
# define ICRx ICR1
|
||||
# define TCCRxA TCCR1A
|
||||
|
|
@ -122,9 +124,7 @@
|
|||
# define COMxx1 COM1B1
|
||||
# define OCRxx OCR1B
|
||||
# endif
|
||||
# else
|
||||
# if !defined(BACKLIGHT_CUSTOM_DRIVER)
|
||||
# if !defined(B5_AUDIO) && !defined(B6_AUDIO) && !defined(B7_AUDIO)
|
||||
#elif !defined(B5_AUDIO) && !defined(B6_AUDIO) && !defined(B7_AUDIO)
|
||||
// Timer 1 is not in use by Audio feature, Backlight can use it
|
||||
# pragma message "Using hardware timer 1 with software PWM"
|
||||
# define HARDWARE_PWM
|
||||
|
|
@ -143,7 +143,7 @@
|
|||
|
||||
# define OCIExA OCIE1A
|
||||
# define OCRxx OCR1A
|
||||
# elif !defined(C6_AUDIO) && !defined(C5_AUDIO) && !defined(C4_AUDIO)
|
||||
#elif !defined(C6_AUDIO) && !defined(C5_AUDIO) && !defined(C4_AUDIO)
|
||||
# pragma message "Using hardware timer 3 with software PWM"
|
||||
// Timer 3 is not in use by Audio feature, Backlight can use it
|
||||
# define HARDWARE_PWM
|
||||
|
|
@ -158,37 +158,33 @@
|
|||
|
||||
# define OCIExA OCIE3A
|
||||
# define OCRxx OCR3A
|
||||
# else
|
||||
# pragma message "Audio in use - using pure software PWM"
|
||||
# define NO_HARDWARE_PWM
|
||||
# endif
|
||||
# else
|
||||
# pragma message "Custom driver defined - using pure software PWM"
|
||||
# define NO_HARDWARE_PWM
|
||||
# endif
|
||||
# endif
|
||||
#elif defined(BACKLIGHT_CUSTOM_DRIVER)
|
||||
error("Please set 'BACKLIGHT_DRIVER = custom' within rules.mk")
|
||||
#else
|
||||
error("Please set 'BACKLIGHT_DRIVER = software' within rules.mk")
|
||||
#endif
|
||||
|
||||
# ifndef BACKLIGHT_ON_STATE
|
||||
#ifndef BACKLIGHT_ON_STATE
|
||||
# define BACKLIGHT_ON_STATE 1
|
||||
# endif
|
||||
#endif
|
||||
|
||||
void backlight_on(pin_t backlight_pin) {
|
||||
# if BACKLIGHT_ON_STATE == 1
|
||||
#if BACKLIGHT_ON_STATE == 1
|
||||
writePinHigh(backlight_pin);
|
||||
# else
|
||||
#else
|
||||
writePinLow(backlight_pin);
|
||||
# endif
|
||||
#endif
|
||||
}
|
||||
|
||||
void backlight_off(pin_t backlight_pin) {
|
||||
# if BACKLIGHT_ON_STATE == 1
|
||||
#if BACKLIGHT_ON_STATE == 1
|
||||
writePinLow(backlight_pin);
|
||||
# else
|
||||
#else
|
||||
writePinHigh(backlight_pin);
|
||||
# endif
|
||||
#endif
|
||||
}
|
||||
|
||||
# if defined(NO_HARDWARE_PWM) || defined(BACKLIGHT_PWM_TIMER) // pwm through software
|
||||
#ifdef BACKLIGHT_PWM_TIMER // pwm through software
|
||||
|
||||
// we support multiple backlight pins
|
||||
# ifndef BACKLIGHT_LED_COUNT
|
||||
|
|
@ -210,7 +206,7 @@ void backlight_off(pin_t backlight_pin) {
|
|||
|
||||
static const pin_t backlight_pins[BACKLIGHT_LED_COUNT] = BACKLIGHT_PIN_INIT;
|
||||
|
||||
# else // full hardware PWM
|
||||
#else // full hardware PWM
|
||||
|
||||
static inline void enable_pwm(void) {
|
||||
# if BACKLIGHT_ON_STATE == 1
|
||||
|
|
@ -232,42 +228,9 @@ static inline void disable_pwm(void) {
|
|||
static const pin_t backlight_pin = BACKLIGHT_PIN;
|
||||
# define FOR_EACH_LED(x) x
|
||||
|
||||
# endif
|
||||
#endif
|
||||
|
||||
# ifdef NO_HARDWARE_PWM
|
||||
void backlight_init_ports(void) {
|
||||
// Setup backlight pin as output and output to on state.
|
||||
FOR_EACH_LED(setPinOutput(backlight_pin); backlight_on(backlight_pin);)
|
||||
|
||||
# ifdef BACKLIGHT_BREATHING
|
||||
if (is_backlight_breathing()) {
|
||||
breathing_enable();
|
||||
}
|
||||
# endif
|
||||
}
|
||||
|
||||
uint8_t backlight_tick = 0;
|
||||
|
||||
# ifndef BACKLIGHT_CUSTOM_DRIVER
|
||||
void backlight_task(void) {
|
||||
if ((0xFFFF >> ((BACKLIGHT_LEVELS - get_backlight_level()) * ((BACKLIGHT_LEVELS + 1) / 2))) & (1 << backlight_tick)) {
|
||||
FOR_EACH_LED(backlight_on(backlight_pin);)
|
||||
} else {
|
||||
FOR_EACH_LED(backlight_off(backlight_pin);)
|
||||
}
|
||||
backlight_tick = (backlight_tick + 1) % 16;
|
||||
}
|
||||
# endif
|
||||
|
||||
# ifdef BACKLIGHT_BREATHING
|
||||
# ifndef BACKLIGHT_CUSTOM_DRIVER
|
||||
# error "Backlight breathing only available with hardware PWM. Please disable."
|
||||
# endif
|
||||
# endif
|
||||
|
||||
# else // hardware pwm through timer
|
||||
|
||||
# ifdef BACKLIGHT_PWM_TIMER
|
||||
#ifdef BACKLIGHT_PWM_TIMER
|
||||
|
||||
// The idea of software PWM assisted by hardware timers is the following
|
||||
// we use the hardware timer in fast PWM mode like for hardware PWM, but
|
||||
|
|
@ -306,9 +269,9 @@ ISR(TIMERx_OVF_vect) {
|
|||
}
|
||||
}
|
||||
|
||||
# endif
|
||||
#endif
|
||||
|
||||
# define TIMER_TOP 0xFFFFU
|
||||
#define TIMER_TOP 0xFFFFU
|
||||
|
||||
// See http://jared.geek.nz/2013/feb/linear-led-pwm
|
||||
static uint16_t cie_lightness(uint16_t v) {
|
||||
|
|
@ -329,40 +292,38 @@ static uint16_t cie_lightness(uint16_t v) {
|
|||
// range for val is [0..TIMER_TOP]. PWM pin is high while the timer count is below val.
|
||||
static inline void set_pwm(uint16_t val) { OCRxx = val; }
|
||||
|
||||
# ifndef BACKLIGHT_CUSTOM_DRIVER
|
||||
void backlight_set(uint8_t level) {
|
||||
if (level > BACKLIGHT_LEVELS) level = BACKLIGHT_LEVELS;
|
||||
|
||||
if (level == 0) {
|
||||
# ifdef BACKLIGHT_PWM_TIMER
|
||||
#ifdef BACKLIGHT_PWM_TIMER
|
||||
if (OCRxx) {
|
||||
TIMSKx &= ~(_BV(OCIExA));
|
||||
TIMSKx &= ~(_BV(TOIEx));
|
||||
}
|
||||
# else
|
||||
#else
|
||||
// Turn off PWM control on backlight pin
|
||||
disable_pwm();
|
||||
# endif
|
||||
#endif
|
||||
FOR_EACH_LED(backlight_off(backlight_pin);)
|
||||
} else {
|
||||
# ifdef BACKLIGHT_PWM_TIMER
|
||||
#ifdef BACKLIGHT_PWM_TIMER
|
||||
if (!OCRxx) {
|
||||
TIMSKx |= _BV(OCIExA);
|
||||
TIMSKx |= _BV(TOIEx);
|
||||
}
|
||||
# else
|
||||
#else
|
||||
// Turn on PWM control of backlight pin
|
||||
enable_pwm();
|
||||
# endif
|
||||
#endif
|
||||
}
|
||||
// Set the brightness
|
||||
set_pwm(cie_lightness(TIMER_TOP * (uint32_t)level / BACKLIGHT_LEVELS));
|
||||
}
|
||||
|
||||
void backlight_task(void) {}
|
||||
# endif // BACKLIGHT_CUSTOM_DRIVER
|
||||
|
||||
# ifdef BACKLIGHT_BREATHING
|
||||
#ifdef BACKLIGHT_BREATHING
|
||||
|
||||
# define BREATHING_NO_HALT 0
|
||||
# define BREATHING_HALT_OFF 1
|
||||
|
|
@ -473,7 +434,7 @@ ISR(TIMERx_OVF_vect)
|
|||
set_pwm(cie_lightness(scale_backlight((uint16_t)pgm_read_byte(&breathing_table[index]) * 0x0101U)));
|
||||
}
|
||||
|
||||
# endif // BACKLIGHT_BREATHING
|
||||
#endif // BACKLIGHT_BREATHING
|
||||
|
||||
void backlight_init_ports(void) {
|
||||
// Setup backlight pin as output and output to on state.
|
||||
|
|
@ -483,12 +444,12 @@ void backlight_init_ports(void) {
|
|||
// Go read the ATmega32u4 datasheet.
|
||||
// And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on
|
||||
|
||||
# ifdef BACKLIGHT_PWM_TIMER
|
||||
#ifdef BACKLIGHT_PWM_TIMER
|
||||
// TimerX setup, Fast PWM mode count to TOP set in ICRx
|
||||
TCCRxA = _BV(WGM11); // = 0b00000010;
|
||||
// clock select clk/1
|
||||
TCCRxB = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
|
||||
# else // hardware PWM
|
||||
#else // hardware PWM
|
||||
// Pin PB7 = OCR1C (Timer 1, Channel C)
|
||||
// Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0
|
||||
// (i.e. start high, go low when counter matches.)
|
||||
|
|
@ -507,18 +468,14 @@ void backlight_init_ports(void) {
|
|||
# endif
|
||||
|
||||
TCCRxB = _BV(WGM13) | _BV(WGM12) | _BV(CS10);
|
||||
# endif
|
||||
#endif
|
||||
// Use full 16-bit resolution. Counter counts to ICR1 before reset to 0.
|
||||
ICRx = TIMER_TOP;
|
||||
|
||||
backlight_init();
|
||||
# ifdef BACKLIGHT_BREATHING
|
||||
#ifdef BACKLIGHT_BREATHING
|
||||
if (is_backlight_breathing()) {
|
||||
breathing_enable();
|
||||
}
|
||||
# endif
|
||||
#endif
|
||||
}
|
||||
|
||||
# endif // hardware backlight
|
||||
|
||||
#endif // backlight
|
||||
|
|
|
|||
Loading…
Reference in a new issue