mirror of
https://github.com/firewalkwithm3/qmk_firmware.git
synced 2024-11-22 11:30:30 +08:00
Further refactoring of joystick feature (#18437)
This commit is contained in:
Ryan
GitHub
parent
fb400f2ac2
commit
be8907d634
|
|
@ -70,71 +70,44 @@ When the ADC reads 900 or higher, the returned axis value will be -127, whereas
|
|||
|
||||
In this example, the first axis will be read from the `A4` pin while `B0` is set high and `A7` is set low, using `analogReadPin()`, whereas the second axis will not be read.
|
||||
|
||||
In order to give a value to the second axis, you can do so in any customizable entry point: as an action, in `process_record_user()` or in `matrix_scan_user()`, or even in `joystick_task()` which is called even when no key has been pressed.
|
||||
You assign a value by writing to `joystick_status.axes[axis_index]` a signed 8-bit value (ranging from -127 to 127). Then it is necessary to assign the flag `JS_UPDATED` to `joystick_status.status` in order for an updated HID report to be sent.
|
||||
#### Virtual Axes
|
||||
|
||||
The following example writes two axes based on keypad presses, with `KC_P5` as a precision modifier:
|
||||
To give a value to virtual axes, call `joystick_set_axis(axis, value)`.
|
||||
|
||||
The following example adjusts two virtual axes (X and Y) based on keypad presses, with `KC_P5` as a precision modifier:
|
||||
|
||||
```c
|
||||
#ifdef ANALOG_JOYSTICK_ENABLE
|
||||
static uint8_t precision_val = 70;
|
||||
static uint8_t axesFlags = 0;
|
||||
enum axes {
|
||||
Precision = 1,
|
||||
Axis1High = 2,
|
||||
Axis1Low = 4,
|
||||
Axis2High = 8,
|
||||
Axis2Low = 16
|
||||
joystick_config_t joystick_axes[JOYSTICK_AXES_COUNT] = {
|
||||
[0] = JOYSTICK_AXIS_VIRTUAL, // x
|
||||
[1] = JOYSTICK_AXIS_VIRTUAL // y
|
||||
};
|
||||
#endif
|
||||
|
||||
static bool precision = false;
|
||||
static uint16_t precision_mod = 64;
|
||||
static uint16_t axis_val = 127;
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
switch(keycode) {
|
||||
#ifdef ANALOG_JOYSTICK_ENABLE
|
||||
// virtual joystick
|
||||
# if JOYSTICK_AXES_COUNT > 1
|
||||
int16_t precision_val = axis_val;
|
||||
if (precision) {
|
||||
precision_val -= precision_mod;
|
||||
}
|
||||
|
||||
switch (keycode) {
|
||||
case KC_P8:
|
||||
if (record->event.pressed) {
|
||||
axesFlags |= Axis2Low;
|
||||
} else {
|
||||
axesFlags &= ~Axis2Low;
|
||||
}
|
||||
joystick_status.status |= JS_UPDATED;
|
||||
break;
|
||||
joystick_set_axis(1, record->event.pressed ? -precision_val : 0);
|
||||
return false;
|
||||
case KC_P2:
|
||||
if (record->event.pressed) {
|
||||
axesFlags |= Axis2High;
|
||||
} else {
|
||||
axesFlags &= ~Axis2High;
|
||||
}
|
||||
joystick_status.status |= JS_UPDATED;
|
||||
break;
|
||||
# endif
|
||||
joystick_set_axis(1, record->event.pressed ? precision_val : 0);
|
||||
return false;
|
||||
case KC_P4:
|
||||
if (record->event.pressed) {
|
||||
axesFlags |= Axis1Low;
|
||||
} else {
|
||||
axesFlags &= ~Axis1Low;
|
||||
}
|
||||
joystick_status.status |= JS_UPDATED;
|
||||
break;
|
||||
joystick_set_axis(0, record->event.pressed ? -precision_val : 0);
|
||||
return false;
|
||||
case KC_P6:
|
||||
if (record->event.pressed) {
|
||||
axesFlags |= Axis1High;
|
||||
} else {
|
||||
axesFlags &= ~Axis1High;
|
||||
}
|
||||
joystick_status.status |= JS_UPDATED;
|
||||
break;
|
||||
joystick_set_axis(0, record->event.pressed ? precision_val : 0);
|
||||
return false;
|
||||
case KC_P5:
|
||||
if (record->event.pressed) {
|
||||
axesFlags |= Precision;
|
||||
} else {
|
||||
axesFlags &= ~Precision;
|
||||
}
|
||||
joystick_status.status |= JS_UPDATED;
|
||||
break;
|
||||
#endif
|
||||
precision = record->event.pressed;
|
||||
return false;
|
||||
}
|
||||
return true;
|
||||
}
|
||||
|
|
|
|||
|
|
@ -10,11 +10,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
|||
|
||||
void matrix_scan_user() {
|
||||
int16_t val = (((uint32_t)timer_read() % 5000 - 2500) * 255) / 5000;
|
||||
|
||||
if (val != joystick_status.axes[1]) {
|
||||
joystick_status.axes[1] = val;
|
||||
joystick_status.status |= JS_UPDATED;
|
||||
}
|
||||
joystick_set_axis(1, val);
|
||||
}
|
||||
|
||||
// Joystick config
|
||||
|
|
|
|||
|
|
@ -3,8 +3,6 @@
|
|||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
#include "joystick.h"
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT_all(
|
||||
JS_BUTTON0,JS_BUTTON1,JS_BUTTON2,JS_BUTTON3,JS_BUTTON4,JS_BUTTON5,JS_BUTTON6,
|
||||
|
|
@ -24,11 +22,8 @@ joystick_config_t joystick_axes[JOYSTICK_AXES_COUNT] = {
|
|||
|
||||
bool encoder_update_kb(uint8_t index, bool clockwise) {
|
||||
joystick_position += (clockwise ? 2 : -2) * (full_joystick_value / pulses_per_revolution); // +2 and -2 are used, since +1.0 and -1.0 axis output refers to positions at half of a full rotation
|
||||
joystick_set_axis(0, joystick_position);
|
||||
|
||||
if (joystick_position != joystick_status.axes[0]) {
|
||||
joystick_status.axes[0] = joystick_position;
|
||||
joystick_status.status |= JS_UPDATED;
|
||||
}
|
||||
return true;
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -1,5 +1,24 @@
|
|||
/* Copyright 2022
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include "joystick.h"
|
||||
|
||||
#include "analog.h"
|
||||
#include "wait.h"
|
||||
|
||||
// clang-format off
|
||||
joystick_t joystick_status = {
|
||||
.buttons = {0},
|
||||
|
|
@ -15,12 +34,13 @@ joystick_t joystick_status = {
|
|||
// array defining the reading of analog values for each axis
|
||||
__attribute__((weak)) joystick_config_t joystick_axes[JOYSTICK_AXES_COUNT] = {};
|
||||
|
||||
// to be implemented in the hid protocol library
|
||||
void send_joystick_packet(joystick_t *joystick);
|
||||
__attribute__((weak)) void joystick_task(void) {
|
||||
joystick_read_axes();
|
||||
}
|
||||
|
||||
void joystick_flush(void) {
|
||||
if ((joystick_status.status & JS_UPDATED) > 0) {
|
||||
send_joystick_packet(&joystick_status);
|
||||
host_joystick_send(&joystick_status);
|
||||
joystick_status.status &= ~JS_UPDATED;
|
||||
}
|
||||
}
|
||||
|
|
@ -36,3 +56,75 @@ void unregister_joystick_button(uint8_t button) {
|
|||
joystick_status.status |= JS_UPDATED;
|
||||
joystick_flush();
|
||||
}
|
||||
|
||||
int16_t joystick_read_axis(uint8_t axis) {
|
||||
// disable pull-up resistor
|
||||
writePinLow(joystick_axes[axis].input_pin);
|
||||
|
||||
// if pin was a pull-up input, we need to uncharge it by turning it low
|
||||
// before making it a low input
|
||||
setPinOutput(joystick_axes[axis].input_pin);
|
||||
|
||||
wait_us(10);
|
||||
|
||||
if (joystick_axes[axis].output_pin != JS_VIRTUAL_AXIS) {
|
||||
setPinOutput(joystick_axes[axis].output_pin);
|
||||
writePinHigh(joystick_axes[axis].output_pin);
|
||||
}
|
||||
|
||||
if (joystick_axes[axis].ground_pin != JS_VIRTUAL_AXIS) {
|
||||
setPinOutput(joystick_axes[axis].ground_pin);
|
||||
writePinLow(joystick_axes[axis].ground_pin);
|
||||
}
|
||||
|
||||
wait_us(10);
|
||||
|
||||
setPinInput(joystick_axes[axis].input_pin);
|
||||
|
||||
wait_us(10);
|
||||
|
||||
#if defined(ANALOG_JOYSTICK_ENABLE) && (defined(__AVR__) || defined(PROTOCOL_CHIBIOS))
|
||||
int16_t axis_val = analogReadPin(joystick_axes[axis].input_pin);
|
||||
#else
|
||||
// default to resting position
|
||||
int16_t axis_val = joystick_axes[axis].mid_digit;
|
||||
#endif
|
||||
|
||||
// test the converted value against the lower range
|
||||
int32_t ref = joystick_axes[axis].mid_digit;
|
||||
int32_t range = joystick_axes[axis].min_digit;
|
||||
int32_t ranged_val = ((axis_val - ref) * -JOYSTICK_RESOLUTION) / (range - ref);
|
||||
|
||||
if (ranged_val > 0) {
|
||||
// the value is in the higher range
|
||||
range = joystick_axes[axis].max_digit;
|
||||
ranged_val = ((axis_val - ref) * JOYSTICK_RESOLUTION) / (range - ref);
|
||||
}
|
||||
|
||||
// clamp the result in the valid range
|
||||
ranged_val = ranged_val < -JOYSTICK_RESOLUTION ? -JOYSTICK_RESOLUTION : ranged_val;
|
||||
ranged_val = ranged_val > JOYSTICK_RESOLUTION ? JOYSTICK_RESOLUTION : ranged_val;
|
||||
|
||||
return ranged_val;
|
||||
}
|
||||
|
||||
void joystick_read_axes() {
|
||||
#if JOYSTICK_AXES_COUNT > 0
|
||||
for (int i = 0; i < JOYSTICK_AXES_COUNT; ++i) {
|
||||
if (joystick_axes[i].input_pin == JS_VIRTUAL_AXIS) {
|
||||
continue;
|
||||
}
|
||||
|
||||
joystick_set_axis(i, joystick_read_axis(i));
|
||||
}
|
||||
|
||||
joystick_flush();
|
||||
#endif
|
||||
}
|
||||
|
||||
void joystick_set_axis(uint8_t axis, int16_t value) {
|
||||
if (value != joystick_status.axes[axis]) {
|
||||
joystick_status.axes[axis] = value;
|
||||
joystick_status.status |= JS_UPDATED;
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,3 +1,19 @@
|
|||
/* Copyright 2022
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include <stdint.h>
|
||||
|
|
@ -54,7 +70,10 @@ typedef struct {
|
|||
|
||||
extern joystick_config_t joystick_axes[JOYSTICK_AXES_COUNT];
|
||||
|
||||
enum joystick_status { JS_INITIALIZED = 1, JS_UPDATED = 2 };
|
||||
enum joystick_status {
|
||||
JS_INITIALIZED = 1,
|
||||
JS_UPDATED,
|
||||
};
|
||||
|
||||
typedef struct {
|
||||
uint8_t buttons[(JOYSTICK_BUTTON_COUNT - 1) / 8 + 1];
|
||||
|
|
@ -65,7 +84,14 @@ typedef struct {
|
|||
|
||||
extern joystick_t joystick_status;
|
||||
|
||||
void joystick_task(void);
|
||||
void joystick_flush(void);
|
||||
|
||||
void register_joystick_button(uint8_t button);
|
||||
void unregister_joystick_button(uint8_t button);
|
||||
|
||||
int16_t joystick_read_axis(uint8_t axis);
|
||||
void joystick_read_axes(void);
|
||||
void joystick_set_axis(uint8_t axis, int16_t value);
|
||||
|
||||
void host_joystick_send(joystick_t *joystick);
|
||||
|
|
|
|||
|
|
@ -1,10 +1,21 @@
|
|||
#include "joystick.h"
|
||||
/* Copyright 2022
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include "process_joystick.h"
|
||||
|
||||
#include "analog.h"
|
||||
|
||||
#include <string.h>
|
||||
#include <math.h>
|
||||
#include "joystick.h"
|
||||
|
||||
bool process_joystick(uint16_t keycode, keyrecord_t *record) {
|
||||
switch (keycode) {
|
||||
|
|
@ -18,132 +29,3 @@ bool process_joystick(uint16_t keycode, keyrecord_t *record) {
|
|||
}
|
||||
return true;
|
||||
}
|
||||
|
||||
__attribute__((weak)) void joystick_task(void) {
|
||||
if (process_joystick_analogread()) {
|
||||
joystick_flush();
|
||||
}
|
||||
}
|
||||
|
||||
uint16_t savePinState(pin_t pin) {
|
||||
#ifdef __AVR__
|
||||
uint8_t pinNumber = pin & 0xF;
|
||||
return ((PORTx_ADDRESS(pin) >> pinNumber) & 0x1) << 1 | ((DDRx_ADDRESS(pin) >> pinNumber) & 0x1);
|
||||
#elif defined(PROTOCOL_CHIBIOS)
|
||||
/*
|
||||
The pin configuration is backed up in the following format :
|
||||
bit 15 9 8 7 6 5 4 3 2 1 0
|
||||
|unused|ODR|IDR|PUPDR|OSPEEDR|OTYPER|MODER|
|
||||
*/
|
||||
return ((PAL_PORT(pin)->MODER >> (2 * PAL_PAD(pin))) & 0x3) | (((PAL_PORT(pin)->OTYPER >> (1 * PAL_PAD(pin))) & 0x1) << 2) | (((PAL_PORT(pin)->OSPEEDR >> (2 * PAL_PAD(pin))) & 0x3) << 3) | (((PAL_PORT(pin)->PUPDR >> (2 * PAL_PAD(pin))) & 0x3) << 5) | (((PAL_PORT(pin)->IDR >> (1 * PAL_PAD(pin))) & 0x1) << 7) | (((PAL_PORT(pin)->ODR >> (1 * PAL_PAD(pin))) & 0x1) << 8);
|
||||
#else
|
||||
return 0;
|
||||
#endif
|
||||
}
|
||||
|
||||
void restorePinState(pin_t pin, uint16_t restoreState) {
|
||||
#if defined(PROTOCOL_LUFA)
|
||||
uint8_t pinNumber = pin & 0xF;
|
||||
PORTx_ADDRESS(pin) = (PORTx_ADDRESS(pin) & ~_BV(pinNumber)) | (((restoreState >> 1) & 0x1) << pinNumber);
|
||||
DDRx_ADDRESS(pin) = (DDRx_ADDRESS(pin) & ~_BV(pinNumber)) | ((restoreState & 0x1) << pinNumber);
|
||||
#elif defined(PROTOCOL_CHIBIOS)
|
||||
PAL_PORT(pin)->MODER = (PAL_PORT(pin)->MODER & ~(0x3 << (2 * PAL_PAD(pin)))) | (restoreState & 0x3) << (2 * PAL_PAD(pin));
|
||||
PAL_PORT(pin)->OTYPER = (PAL_PORT(pin)->OTYPER & ~(0x1 << (1 * PAL_PAD(pin)))) | ((restoreState >> 2) & 0x1) << (1 * PAL_PAD(pin));
|
||||
PAL_PORT(pin)->OSPEEDR = (PAL_PORT(pin)->OSPEEDR & ~(0x3 << (2 * PAL_PAD(pin)))) | ((restoreState >> 3) & 0x3) << (2 * PAL_PAD(pin));
|
||||
PAL_PORT(pin)->PUPDR = (PAL_PORT(pin)->PUPDR & ~(0x3 << (2 * PAL_PAD(pin)))) | ((restoreState >> 5) & 0x3) << (2 * PAL_PAD(pin));
|
||||
PAL_PORT(pin)->IDR = (PAL_PORT(pin)->IDR & ~(0x1 << (1 * PAL_PAD(pin)))) | ((restoreState >> 7) & 0x1) << (1 * PAL_PAD(pin));
|
||||
PAL_PORT(pin)->ODR = (PAL_PORT(pin)->ODR & ~(0x1 << (1 * PAL_PAD(pin)))) | ((restoreState >> 8) & 0x1) << (1 * PAL_PAD(pin));
|
||||
#else
|
||||
return;
|
||||
#endif
|
||||
}
|
||||
|
||||
__attribute__((weak)) bool process_joystick_analogread() {
|
||||
return process_joystick_analogread_quantum();
|
||||
}
|
||||
|
||||
bool process_joystick_analogread_quantum() {
|
||||
#if JOYSTICK_AXES_COUNT > 0
|
||||
for (int axis_index = 0; axis_index < JOYSTICK_AXES_COUNT; ++axis_index) {
|
||||
if (joystick_axes[axis_index].input_pin == JS_VIRTUAL_AXIS) {
|
||||
continue;
|
||||
}
|
||||
|
||||
// save previous input pin status as well
|
||||
uint16_t inputSavedState = savePinState(joystick_axes[axis_index].input_pin);
|
||||
|
||||
// disable pull-up resistor
|
||||
writePinLow(joystick_axes[axis_index].input_pin);
|
||||
|
||||
// if pin was a pull-up input, we need to uncharge it by turning it low
|
||||
// before making it a low input
|
||||
setPinOutput(joystick_axes[axis_index].input_pin);
|
||||
|
||||
wait_us(10);
|
||||
|
||||
// save and apply output pin status
|
||||
uint16_t outputSavedState = 0;
|
||||
if (joystick_axes[axis_index].output_pin != JS_VIRTUAL_AXIS) {
|
||||
// save previous output pin status
|
||||
outputSavedState = savePinState(joystick_axes[axis_index].output_pin);
|
||||
|
||||
setPinOutput(joystick_axes[axis_index].output_pin);
|
||||
writePinHigh(joystick_axes[axis_index].output_pin);
|
||||
}
|
||||
|
||||
uint16_t groundSavedState = 0;
|
||||
if (joystick_axes[axis_index].ground_pin != JS_VIRTUAL_AXIS) {
|
||||
// save previous output pin status
|
||||
groundSavedState = savePinState(joystick_axes[axis_index].ground_pin);
|
||||
|
||||
setPinOutput(joystick_axes[axis_index].ground_pin);
|
||||
writePinLow(joystick_axes[axis_index].ground_pin);
|
||||
}
|
||||
|
||||
wait_us(10);
|
||||
|
||||
setPinInput(joystick_axes[axis_index].input_pin);
|
||||
|
||||
wait_us(10);
|
||||
|
||||
# if defined(ANALOG_JOYSTICK_ENABLE) && (defined(__AVR__) || defined(PROTOCOL_CHIBIOS))
|
||||
int16_t axis_val = analogReadPin(joystick_axes[axis_index].input_pin);
|
||||
# else
|
||||
// default to resting position
|
||||
int16_t axis_val = joystick_axes[axis_index].mid_digit;
|
||||
# endif
|
||||
|
||||
// test the converted value against the lower range
|
||||
int32_t ref = joystick_axes[axis_index].mid_digit;
|
||||
int32_t range = joystick_axes[axis_index].min_digit;
|
||||
int32_t ranged_val = ((axis_val - ref) * -JOYSTICK_RESOLUTION) / (range - ref);
|
||||
|
||||
if (ranged_val > 0) {
|
||||
// the value is in the higher range
|
||||
range = joystick_axes[axis_index].max_digit;
|
||||
ranged_val = ((axis_val - ref) * JOYSTICK_RESOLUTION) / (range - ref);
|
||||
}
|
||||
|
||||
// clamp the result in the valid range
|
||||
ranged_val = ranged_val < -JOYSTICK_RESOLUTION ? -JOYSTICK_RESOLUTION : ranged_val;
|
||||
ranged_val = ranged_val > JOYSTICK_RESOLUTION ? JOYSTICK_RESOLUTION : ranged_val;
|
||||
|
||||
if (ranged_val != joystick_status.axes[axis_index]) {
|
||||
joystick_status.axes[axis_index] = ranged_val;
|
||||
joystick_status.status |= JS_UPDATED;
|
||||
}
|
||||
|
||||
// restore output, ground and input status
|
||||
if (joystick_axes[axis_index].output_pin != JS_VIRTUAL_AXIS) {
|
||||
restorePinState(joystick_axes[axis_index].output_pin, outputSavedState);
|
||||
}
|
||||
if (joystick_axes[axis_index].ground_pin != JS_VIRTUAL_AXIS) {
|
||||
restorePinState(joystick_axes[axis_index].ground_pin, groundSavedState);
|
||||
}
|
||||
|
||||
restorePinState(joystick_axes[axis_index].input_pin, inputSavedState);
|
||||
}
|
||||
|
||||
#endif
|
||||
return true;
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,11 +1,22 @@
|
|||
/* Copyright 2022
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include <stdint.h>
|
||||
#include "quantum.h"
|
||||
|
||||
bool process_joystick(uint16_t keycode, keyrecord_t *record);
|
||||
|
||||
void joystick_task(void);
|
||||
|
||||
bool process_joystick_analogread(void);
|
||||
bool process_joystick_analogread_quantum(void);
|
||||
|
|
|
|||
|
|
@ -50,10 +50,6 @@
|
|||
extern keymap_config_t keymap_config;
|
||||
#endif
|
||||
|
||||
#ifdef JOYSTICK_ENABLE
|
||||
# include "joystick.h"
|
||||
#endif
|
||||
|
||||
/* ---------------------------------------------------------
|
||||
* Global interface variables and declarations
|
||||
* ---------------------------------------------------------
|
||||
|
|
@ -1151,59 +1147,15 @@ void virtser_task(void) {
|
|||
|
||||
#endif
|
||||
|
||||
void send_joystick(report_joystick_t *report) {
|
||||
#ifdef JOYSTICK_ENABLE
|
||||
|
||||
void send_joystick_packet(joystick_t *joystick) {
|
||||
static joystick_report_t rep;
|
||||
rep = (joystick_report_t) {
|
||||
# if JOYSTICK_AXES_COUNT > 0
|
||||
.axes =
|
||||
{ joystick->axes[0],
|
||||
|
||||
# if JOYSTICK_AXES_COUNT >= 2
|
||||
joystick->axes[1],
|
||||
# endif
|
||||
# if JOYSTICK_AXES_COUNT >= 3
|
||||
joystick->axes[2],
|
||||
# endif
|
||||
# if JOYSTICK_AXES_COUNT >= 4
|
||||
joystick->axes[3],
|
||||
# endif
|
||||
# if JOYSTICK_AXES_COUNT >= 5
|
||||
joystick->axes[4],
|
||||
# endif
|
||||
# if JOYSTICK_AXES_COUNT >= 6
|
||||
joystick->axes[5],
|
||||
# endif
|
||||
},
|
||||
# endif // JOYSTICK_AXES_COUNT>0
|
||||
|
||||
# if JOYSTICK_BUTTON_COUNT > 0
|
||||
.buttons = {
|
||||
joystick->buttons[0],
|
||||
|
||||
# if JOYSTICK_BUTTON_COUNT > 8
|
||||
joystick->buttons[1],
|
||||
# endif
|
||||
# if JOYSTICK_BUTTON_COUNT > 16
|
||||
joystick->buttons[2],
|
||||
# endif
|
||||
# if JOYSTICK_BUTTON_COUNT > 24
|
||||
joystick->buttons[3],
|
||||
# endif
|
||||
}
|
||||
# endif // JOYSTICK_BUTTON_COUNT>0
|
||||
};
|
||||
|
||||
// chnWrite(&drivers.joystick_driver.driver, (uint8_t *)&rep, sizeof(rep));
|
||||
osalSysLock();
|
||||
if (usbGetDriverStateI(&USB_DRIVER) != USB_ACTIVE) {
|
||||
osalSysUnlock();
|
||||
return;
|
||||
}
|
||||
|
||||
usbStartTransmitI(&USB_DRIVER, JOYSTICK_IN_EPNUM, (uint8_t *)&rep, sizeof(joystick_report_t));
|
||||
usbStartTransmitI(&USB_DRIVER, JOYSTICK_IN_EPNUM, (uint8_t *)report, sizeof(report_joystick_t));
|
||||
osalSysUnlock();
|
||||
}
|
||||
|
||||
#endif
|
||||
}
|
||||
|
|
|
|||
|
|
@ -24,6 +24,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
#include "debug.h"
|
||||
#include "digitizer.h"
|
||||
|
||||
#ifdef JOYSTICK_ENABLE
|
||||
# include "joystick.h"
|
||||
#endif
|
||||
|
||||
#ifdef BLUETOOTH_ENABLE
|
||||
# include "outputselect.h"
|
||||
# ifdef BLUETOOTH_BLUEFRUIT_LE
|
||||
|
|
@ -161,6 +165,58 @@ void host_consumer_send(uint16_t report) {
|
|||
(*driver->send_extra)(REPORT_ID_CONSUMER, report);
|
||||
}
|
||||
|
||||
#ifdef JOYSTICK_ENABLE
|
||||
void host_joystick_send(joystick_t *joystick) {
|
||||
if (!driver) return;
|
||||
|
||||
report_joystick_t report = {
|
||||
# if JOYSTICK_AXES_COUNT > 0
|
||||
.axes =
|
||||
{
|
||||
joystick->axes[0],
|
||||
|
||||
# if JOYSTICK_AXES_COUNT >= 2
|
||||
joystick->axes[1],
|
||||
# endif
|
||||
# if JOYSTICK_AXES_COUNT >= 3
|
||||
joystick->axes[2],
|
||||
# endif
|
||||
# if JOYSTICK_AXES_COUNT >= 4
|
||||
joystick->axes[3],
|
||||
# endif
|
||||
# if JOYSTICK_AXES_COUNT >= 5
|
||||
joystick->axes[4],
|
||||
# endif
|
||||
# if JOYSTICK_AXES_COUNT >= 6
|
||||
joystick->axes[5],
|
||||
# endif
|
||||
},
|
||||
# endif
|
||||
|
||||
# if JOYSTICK_BUTTON_COUNT > 0
|
||||
.buttons =
|
||||
{
|
||||
joystick->buttons[0],
|
||||
|
||||
# if JOYSTICK_BUTTON_COUNT > 8
|
||||
joystick->buttons[1],
|
||||
# endif
|
||||
# if JOYSTICK_BUTTON_COUNT > 16
|
||||
joystick->buttons[2],
|
||||
# endif
|
||||
# if JOYSTICK_BUTTON_COUNT > 24
|
||||
joystick->buttons[3],
|
||||
# endif
|
||||
},
|
||||
# endif
|
||||
};
|
||||
|
||||
send_joystick(&report);
|
||||
}
|
||||
#endif
|
||||
|
||||
__attribute__((weak)) void send_joystick(report_joystick_t *report) {}
|
||||
|
||||
void host_digitizer_send(digitizer_t *digitizer) {
|
||||
if (!driver) return;
|
||||
|
||||
|
|
|
|||
|
|
@ -31,4 +31,5 @@ typedef struct {
|
|||
void (*send_programmable_button)(uint32_t);
|
||||
} host_driver_t;
|
||||
|
||||
void send_joystick(report_joystick_t *report);
|
||||
void send_digitizer(report_digitizer_t *report);
|
||||
|
|
|
|||
|
|
@ -77,10 +77,6 @@ extern keymap_config_t keymap_config;
|
|||
# include "raw_hid.h"
|
||||
#endif
|
||||
|
||||
#ifdef JOYSTICK_ENABLE
|
||||
# include "joystick.h"
|
||||
#endif
|
||||
|
||||
uint8_t keyboard_idle = 0;
|
||||
/* 0: Boot Protocol, 1: Report Protocol(default) */
|
||||
uint8_t keyboard_protocol = 1;
|
||||
|
|
@ -261,51 +257,10 @@ static void Console_Task(void) {
|
|||
/*******************************************************************************
|
||||
* Joystick
|
||||
******************************************************************************/
|
||||
void send_joystick(report_joystick_t *report) {
|
||||
#ifdef JOYSTICK_ENABLE
|
||||
void send_joystick_packet(joystick_t *joystick) {
|
||||
uint8_t timeout = 255;
|
||||
|
||||
static joystick_report_t r;
|
||||
r = (joystick_report_t) {
|
||||
# if JOYSTICK_AXES_COUNT > 0
|
||||
.axes =
|
||||
{ joystick->axes[0],
|
||||
|
||||
# if JOYSTICK_AXES_COUNT >= 2
|
||||
joystick->axes[1],
|
||||
# endif
|
||||
# if JOYSTICK_AXES_COUNT >= 3
|
||||
joystick->axes[2],
|
||||
# endif
|
||||
# if JOYSTICK_AXES_COUNT >= 4
|
||||
joystick->axes[3],
|
||||
# endif
|
||||
# if JOYSTICK_AXES_COUNT >= 5
|
||||
joystick->axes[4],
|
||||
# endif
|
||||
# if JOYSTICK_AXES_COUNT >= 6
|
||||
joystick->axes[5],
|
||||
# endif
|
||||
},
|
||||
# endif // JOYSTICK_AXES_COUNT>0
|
||||
|
||||
# if JOYSTICK_BUTTON_COUNT > 0
|
||||
.buttons = {
|
||||
joystick->buttons[0],
|
||||
|
||||
# if JOYSTICK_BUTTON_COUNT > 8
|
||||
joystick->buttons[1],
|
||||
# endif
|
||||
# if JOYSTICK_BUTTON_COUNT > 16
|
||||
joystick->buttons[2],
|
||||
# endif
|
||||
# if JOYSTICK_BUTTON_COUNT > 24
|
||||
joystick->buttons[3],
|
||||
# endif
|
||||
}
|
||||
# endif // JOYSTICK_BUTTON_COUNT>0
|
||||
};
|
||||
|
||||
/* Select the Joystick Report Endpoint */
|
||||
Endpoint_SelectEndpoint(JOYSTICK_IN_EPNUM);
|
||||
|
||||
|
|
@ -315,12 +270,12 @@ void send_joystick_packet(joystick_t *joystick) {
|
|||
if (!Endpoint_IsReadWriteAllowed()) return;
|
||||
|
||||
/* Write Joystick Report Data */
|
||||
Endpoint_Write_Stream_LE(&r, sizeof(joystick_report_t), NULL);
|
||||
Endpoint_Write_Stream_LE(report, sizeof(report_joystick_t), NULL);
|
||||
|
||||
/* Finalize the stream transfer to send the last packet */
|
||||
Endpoint_ClearIN();
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
/*******************************************************************************
|
||||
* USB Events
|
||||
|
|
|
|||
|
|
@ -245,7 +245,7 @@ typedef struct {
|
|||
#if JOYSTICK_BUTTON_COUNT > 0
|
||||
uint8_t buttons[(JOYSTICK_BUTTON_COUNT - 1) / 8 + 1];
|
||||
#endif
|
||||
} __attribute__((packed)) joystick_report_t;
|
||||
} __attribute__((packed)) report_joystick_t;
|
||||
|
||||
/* keycode to system usage */
|
||||
static inline uint16_t KEYCODE2SYSTEM(uint8_t key) {
|
||||
|
|
|
|||
Loading…
Reference in a new issue