mirror of
https://github.com/firewalkwithm3/qmk_firmware.git
synced 2024-11-22 11:30:30 +08:00
Improve pmw3360 sensor and make it more hardware agnostic (#14097)
This commit is contained in:
Drashna Jaelre
GitHub
parent
3452c89c8b
commit
da1c011afc
|
|
@ -16,37 +16,69 @@
|
|||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include "pmw3360.h"
|
||||
#include "wait.h"
|
||||
#include "debug.h"
|
||||
#include "print.h"
|
||||
#include "pmw3360.h"
|
||||
#include "pmw3360_firmware.h"
|
||||
|
||||
bool _inBurst = false;
|
||||
// Registers
|
||||
#define REG_Product_ID 0x00
|
||||
#define REG_Revision_ID 0x01
|
||||
#define REG_Motion 0x02
|
||||
#define REG_Delta_X_L 0x03
|
||||
#define REG_Delta_X_H 0x04
|
||||
#define REG_Delta_Y_L 0x05
|
||||
#define REG_Delta_Y_H 0x06
|
||||
#define REG_SQUAL 0x07
|
||||
#define REG_Raw_Data_Sum 0x08
|
||||
#define REG_Maximum_Raw_data 0x09
|
||||
#define REG_Minimum_Raw_data 0x0A
|
||||
#define REG_Shutter_Lower 0x0B
|
||||
#define REG_Shutter_Upper 0x0C
|
||||
#define REG_Control 0x0D
|
||||
#define REG_Config1 0x0F
|
||||
#define REG_Config2 0x10
|
||||
#define REG_Angle_Tune 0x11
|
||||
#define REG_Frame_Capture 0x12
|
||||
#define REG_SROM_Enable 0x13
|
||||
#define REG_Run_Downshift 0x14
|
||||
#define REG_Rest1_Rate_Lower 0x15
|
||||
#define REG_Rest1_Rate_Upper 0x16
|
||||
#define REG_Rest1_Downshift 0x17
|
||||
#define REG_Rest2_Rate_Lower 0x18
|
||||
#define REG_Rest2_Rate_Upper 0x19
|
||||
#define REG_Rest2_Downshift 0x1A
|
||||
#define REG_Rest3_Rate_Lower 0x1B
|
||||
#define REG_Rest3_Rate_Upper 0x1C
|
||||
#define REG_Observation 0x24
|
||||
#define REG_Data_Out_Lower 0x25
|
||||
#define REG_Data_Out_Upper 0x26
|
||||
#define REG_Raw_Data_Dump 0x29
|
||||
#define REG_SROM_ID 0x2A
|
||||
#define REG_Min_SQ_Run 0x2B
|
||||
#define REG_Raw_Data_Threshold 0x2C
|
||||
#define REG_Config5 0x2F
|
||||
#define REG_Power_Up_Reset 0x3A
|
||||
#define REG_Shutdown 0x3B
|
||||
#define REG_Inverse_Product_ID 0x3F
|
||||
#define REG_LiftCutoff_Tune3 0x41
|
||||
#define REG_Angle_Snap 0x42
|
||||
#define REG_LiftCutoff_Tune1 0x4A
|
||||
#define REG_Motion_Burst 0x50
|
||||
#define REG_LiftCutoff_Tune_Timeout 0x58
|
||||
#define REG_LiftCutoff_Tune_Min_Length 0x5A
|
||||
#define REG_SROM_Load_Burst 0x62
|
||||
#define REG_Lift_Config 0x63
|
||||
#define REG_Raw_Data_Burst 0x64
|
||||
#define REG_LiftCutoff_Tune2 0x65
|
||||
|
||||
#ifndef PMW_CPI
|
||||
# define PMW_CPI 1600
|
||||
#endif
|
||||
#ifndef PMW_CLOCK_SPEED
|
||||
# define PMW_CLOCK_SPEED 70000000
|
||||
#endif
|
||||
#ifndef SPI_MODE
|
||||
# define SPI_MODE 3
|
||||
#endif
|
||||
#ifndef SPI_DIVISOR
|
||||
# define SPI_DIVISOR (F_CPU / PMW_CLOCK_SPEED)
|
||||
#endif
|
||||
#ifndef ROTATIONAL_TRANSFORM_ANGLE
|
||||
# define ROTATIONAL_TRANSFORM_ANGLE 0x00
|
||||
#endif
|
||||
#ifndef PMW_CS_PIN
|
||||
# define PMW_CS_PIN SPI_SS_PIN
|
||||
#endif
|
||||
bool _inBurst = false;
|
||||
|
||||
void print_byte(uint8_t byte) { dprintf("%c%c%c%c%c%c%c%c|", (byte & 0x80 ? '1' : '0'), (byte & 0x40 ? '1' : '0'), (byte & 0x20 ? '1' : '0'), (byte & 0x10 ? '1' : '0'), (byte & 0x08 ? '1' : '0'), (byte & 0x04 ? '1' : '0'), (byte & 0x02 ? '1' : '0'), (byte & 0x01 ? '1' : '0')); }
|
||||
|
||||
bool spi_start_adv(void) {
|
||||
bool status = spi_start(PMW_CS_PIN, false, SPI_MODE, SPI_DIVISOR);
|
||||
bool status = spi_start(PMW3360_CS_PIN, PMW3360_SPI_LSBFIRST, PMW3360_SPI_MODE, PMW3360_SPI_DIVISOR);
|
||||
wait_us(1);
|
||||
return status;
|
||||
}
|
||||
|
|
@ -106,7 +138,7 @@ uint16_t pmw_get_cpi(void) {
|
|||
}
|
||||
|
||||
bool pmw_spi_init(void) {
|
||||
setPinOutput(PMW_CS_PIN);
|
||||
setPinOutput(PMW3360_CS_PIN);
|
||||
|
||||
spi_init();
|
||||
_inBurst = false;
|
||||
|
|
@ -137,7 +169,7 @@ bool pmw_spi_init(void) {
|
|||
spi_stop_adv();
|
||||
|
||||
wait_ms(10);
|
||||
pmw_set_cpi(PMW_CPI);
|
||||
pmw_set_cpi(PMW3360_CPI);
|
||||
|
||||
wait_ms(1);
|
||||
|
||||
|
|
@ -147,7 +179,7 @@ bool pmw_spi_init(void) {
|
|||
|
||||
bool init_success = pmw_check_signature();
|
||||
|
||||
writePinLow(PMW_CS_PIN);
|
||||
writePinLow(PMW3360_CS_PIN);
|
||||
|
||||
return init_success;
|
||||
}
|
||||
|
|
|
|||
|
|
@ -20,56 +20,37 @@
|
|||
|
||||
#include "spi_master.h"
|
||||
|
||||
// Registers
|
||||
#define REG_Product_ID 0x00
|
||||
#define REG_Revision_ID 0x01
|
||||
#define REG_Motion 0x02
|
||||
#define REG_Delta_X_L 0x03
|
||||
#define REG_Delta_X_H 0x04
|
||||
#define REG_Delta_Y_L 0x05
|
||||
#define REG_Delta_Y_H 0x06
|
||||
#define REG_SQUAL 0x07
|
||||
#define REG_Raw_Data_Sum 0x08
|
||||
#define REG_Maximum_Raw_data 0x09
|
||||
#define REG_Minimum_Raw_data 0x0A
|
||||
#define REG_Shutter_Lower 0x0B
|
||||
#define REG_Shutter_Upper 0x0C
|
||||
#define REG_Control 0x0D
|
||||
#define REG_Config1 0x0F
|
||||
#define REG_Config2 0x10
|
||||
#define REG_Angle_Tune 0x11
|
||||
#define REG_Frame_Capture 0x12
|
||||
#define REG_SROM_Enable 0x13
|
||||
#define REG_Run_Downshift 0x14
|
||||
#define REG_Rest1_Rate_Lower 0x15
|
||||
#define REG_Rest1_Rate_Upper 0x16
|
||||
#define REG_Rest1_Downshift 0x17
|
||||
#define REG_Rest2_Rate_Lower 0x18
|
||||
#define REG_Rest2_Rate_Upper 0x19
|
||||
#define REG_Rest2_Downshift 0x1A
|
||||
#define REG_Rest3_Rate_Lower 0x1B
|
||||
#define REG_Rest3_Rate_Upper 0x1C
|
||||
#define REG_Observation 0x24
|
||||
#define REG_Data_Out_Lower 0x25
|
||||
#define REG_Data_Out_Upper 0x26
|
||||
#define REG_Raw_Data_Dump 0x29
|
||||
#define REG_SROM_ID 0x2A
|
||||
#define REG_Min_SQ_Run 0x2B
|
||||
#define REG_Raw_Data_Threshold 0x2C
|
||||
#define REG_Config5 0x2F
|
||||
#define REG_Power_Up_Reset 0x3A
|
||||
#define REG_Shutdown 0x3B
|
||||
#define REG_Inverse_Product_ID 0x3F
|
||||
#define REG_LiftCutoff_Tune3 0x41
|
||||
#define REG_Angle_Snap 0x42
|
||||
#define REG_LiftCutoff_Tune1 0x4A
|
||||
#define REG_Motion_Burst 0x50
|
||||
#define REG_LiftCutoff_Tune_Timeout 0x58
|
||||
#define REG_LiftCutoff_Tune_Min_Length 0x5A
|
||||
#define REG_SROM_Load_Burst 0x62
|
||||
#define REG_Lift_Config 0x63
|
||||
#define REG_Raw_Data_Burst 0x64
|
||||
#define REG_LiftCutoff_Tune2 0x65
|
||||
#ifndef PMW3360_CPI
|
||||
# define PMW3360_CPI 1600
|
||||
#endif
|
||||
|
||||
#ifndef PMW3360_CLOCK_SPEED
|
||||
# define PMW3360_CLOCK_SPEED 70000000
|
||||
#endif
|
||||
|
||||
#ifndef PMW3360_SPI_LSBFIRST
|
||||
# define PMW3360_SPI_LSBFIRST false
|
||||
#endif
|
||||
|
||||
#ifndef PMW3360_SPI_MODE
|
||||
# define PMW3360_SPI_MODE 3
|
||||
#endif
|
||||
|
||||
#ifndef PMW3360_SPI_DIVISOR
|
||||
# ifdef __AVR__
|
||||
# define PMW3360_SPI_DIVISOR (F_CPU / PMW3360_CLOCK_SPEED)
|
||||
# else
|
||||
# define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 64
|
||||
# endif
|
||||
#endif
|
||||
|
||||
#ifndef ROTATIONAL_TRANSFORM_ANGLE
|
||||
# define ROTATIONAL_TRANSFORM_ANGLE 0x00
|
||||
#endif
|
||||
|
||||
#ifndef PMW3360_CS_PIN
|
||||
# error "No chip select pin defined -- missing PMW3360_CS_PIN"
|
||||
#endif
|
||||
|
||||
#ifdef CONSOLE_ENABLE
|
||||
void print_byte(uint8_t byte);
|
||||
|
|
|
|||
|
|
@ -89,3 +89,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#define SERIAL_USE_MULTI_TRANSACTION
|
||||
#define SPLIT_TRANSACTION_IDS_KB RPC_ID_STATE_SYNC, RPC_ID_SLAVE_STATE
|
||||
|
||||
/* PMW3360 Settings */
|
||||
#define PMW3360_CS_PIN B0
|
||||
|
|
|
|||
|
|
@ -90,3 +90,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#define SERIAL_USE_MULTI_TRANSACTION
|
||||
#define SPLIT_TRANSACTION_IDS_KB RPC_ID_STATE_SYNC, RPC_ID_SLAVE_STATE
|
||||
|
||||
/* PMW3360 Settings */
|
||||
#define PMW3360_CS_PIN B0
|
||||
|
|
|
|||
|
|
@ -81,3 +81,6 @@
|
|||
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
|
||||
|
||||
// #define DEBUG_LED_PIN F7
|
||||
|
||||
/* PMW3360 Settings */
|
||||
#define PMW3360_CS_PIN B0
|
||||
|
|
|
|||
|
|
@ -57,3 +57,6 @@
|
|||
|
||||
// If board has a debug LED, you can enable it by defining this
|
||||
// #define DEBUG_LED_PIN F7
|
||||
|
||||
/* PMW3360 Settings */
|
||||
#define PMW3360_CS_PIN B0
|
||||
|
|
|
|||
Loading…
Reference in a new issue