* Migrate `LAYOUTS` to data driven, 0-9
* Migrate `LAYOUTS` to data driven, A
* Migrate `LAYOUTS` to data driven, B
* Migrate `LAYOUTS` to data driven, C
* Migrate `LAYOUTS` to data driven, D
* Migrate `LAYOUTS` to data driven, E
* Migrate `LAYOUTS` to data driven, F
* Migrate `LAYOUTS` to data driven, G
* Migrate `LAYOUTS` to data driven, H
* Migrate `LAYOUTS` to data driven, handwired
* Migrate `LAYOUTS` to data driven, I
* Migrate `LAYOUTS` to data driven, J
* Migrate `LAYOUTS` to data driven, K
* Migrate `LAYOUTS` to data driven, L
* Migrate `LAYOUTS` to data driven, M
* Migrate `LAYOUTS` to data driven, N
* Migrate `LAYOUTS` to data driven, O
* Migrate `LAYOUTS` to data driven, P
* Migrate `LAYOUTS` to data driven, Q
* Migrate `LAYOUTS` to data driven, R
* Migrate `LAYOUTS` to data driven, S
* Migrate `LAYOUTS` to data driven, T
* Migrate `LAYOUTS` to data driven, U
* Migrate `LAYOUTS` to data driven, V
* Migrate `LAYOUTS` to data driven, W
* Migrate `LAYOUTS` to data driven, X
* Migrate `LAYOUTS` to data driven, Y
* Migrate `LAYOUTS` to data driven, Z
* disambiguate Bootmagic rules in keymaps
The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic.
This commit edits the files to specify that full Bootmagic is intended.
* remove BOOTMAGIC_ENABLE=full setting
* unify commented BOOTMAGIC_ENABLE rules in keyboards
Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no # Virtual DIP switch configuration;g' {} +
```
* remove commented Bootmagic rules from keymap/user level
Command:
```
find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} +
```
* update keyboard BOOTMAGIC_ENABLE rule formatting
Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later).
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
```
* update keyboards' BOOTMAGIC_ENABLE settings
Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' +
```
* update keymap/user BOOTMAGIC_ENABLE settings
Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.
Commands:
```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
```
* remove and replace inline comments in keyboards and keymap/user files
Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`.
Commands:
```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' +
```
* rename improperly named makefiles
Some files intended to be used as makefiles had improper names causing them to not be used as intended when building.
This commit corrects the filenames of the affected files.
* update renamed file with new rule formatting
* update QMK's template files
Updates QMK's `rules.mk` templates to use the new inline comment.
* update QMK Docs
- remove documentation of full Bootmagic
- update links to Bootmagic Lite doc
- add doc for Magic Keycodes
* rules.mk patch for coarse/ixora and coarse/vinta
* Branch point for 2020 November 28 Breaking Change
* Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183)
* Add support for soft serial to ATmega32U2 (#10204)
* Change MIDI velocity implementation to allow direct control of velocity value (#9940)
* Add ability to build a subset of all keyboards based on platform.
* Actually use eeprom_driver_init().
* Make bootloader_jump weak for ChibiOS. (#10417)
* Joystick 16-bit support (#10439)
* Per-encoder resolutions (#10259)
* Share button state from mousekey to pointing_device (#10179)
* Add hotfix for chibios keyboards not wake (#10088)
* Add advanced/efficient RGB Matrix Indicators (#8564)
* Naming change.
* Support for STM32 GPIOF,G,H,I,J,K (#10206)
* Add milc as a dependency and remove the installed milc (#10563)
* ChibiOS upgrade: early init conversions (#10214)
* ChibiOS upgrade: configuration file migrator (#9952)
* Haptic and solenoid cleanup (#9700)
* XD75 cleanup (#10524)
* OLED display update interval support (#10388)
* Add definition based on currently-selected serial driver. (#10716)
* New feature: Retro Tapping per key (#10622)
* Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638)
* Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530)
* Rescale both ChibiOS and AVR backlighting.
* Reduce Helix keyboard build variation (#8669)
* Minor change to behavior allowing display updates to continue between task ticks (#10750)
* Some GPIO manipulations in matrix.c change to atomic. (#10491)
* qmk cformat (#10767)
* [Keyboard] Update the Speedo firmware for v3.0 (#10657)
* Maartenwut/Maarten namechange to evyd13/Evy (#10274)
* [quantum] combine repeated lines of code (#10837)
* Add step sequencer feature (#9703)
* aeboards/ext65 refactor (#10820)
* Refactor xelus/dawn60 for Rev2 later (#10584)
* add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824)
* [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549)
* update chibios os usb for the otg driver (#8893)
* Remove HD44780 References, Part 4 (#10735)
* [Keyboard] Add Valor FRL TKL (+refactor) (#10512)
* Fix cursor position bug in oled_write_raw functions (#10800)
* Fixup version.h writing when using SKIP_VERSION=yes (#10972)
* Allow for certain code in the codebase assuming length of string. (#10974)
* Add AT90USB support for serial.c (#10706)
* Auto shift: support repeats and early registration (#9826)
* Rename ledmatrix.h to match .c file (#7949)
* Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231)
* Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840)
* Merge point for 2020 Nov 28 Breaking Change
* first iteration of my keymap
* * move to userspace
* "script" modes
* keymap bling
* OM and RUPA keys
and tryin to micro-optimize in process_records.c
* woops
swap shifted rupas
forgot to add codepoint for OM
* Apply suggestions from code review
Co-authored-by: Drashna Jaelre <drashna@live.com>
* add call to process_record_keymap, per review
* fall through to process_record_keymap
* license headers
Co-authored-by: Drashna Jaelre <drashna@live.com>
The factory TMK firmware for the TADA68 supports backlight breathing,
so I was surprised when the BL_BRTG key I set up in the online QMK
configurator didn't work.
As far as I can tell, this was just a simple omission.
* fix ANSI layout macro reference
* update ISO layout macro and enable 65_iso community layout support
- rename to LAYOUT_65_iso (with LAYOUT_iso alias for backwards compatibility)
- rename position k2c to k1d (electrical position)
* rules.mk templating
* tada68.h: use #pragma once include guard
* config.h: use #pragma once include guard
* make product id unique
* update info.json
* update readme
* cleanup default keymap
- keycode alignment
- layout macro reference
- four-space indent
* remove matrix_*_user functions from tada68.h
* Add an 65_ansi community layout
- fix quoting because of comma in config.h
* Enable LAYOUT_65_ansi for tada68
* cleanups
* Update keyboards/tada68/tada68.h
Co-Authored-By: fauxpark <fauxpark@gmail.com>
Co-authored-by: fauxpark <fauxpark@gmail.com>
* Add dz60 keymap
* Add my TADA68 layout
* Fix descriptions and formatting
* Formatting fixes
* Add readme file
* Formatting
* move caps lock to correct key, add F-keys to both layers
* Add readme for dz60
* First draft of custom Let's Split layout
* Some more keys
* Finalized keymap
* Added a bunch of custom shortcuts to make layout easier to read
* Add PERMISSIVE_HOLD option to modtap behavior
* Add lock and sleep shortcuts, formatting
* Minor fixes and adjustments
* Add PERMISSIVE_HOLD option, add sleep/lock shortcuts, minor fixes
* Add sleep/lock shortcuts, minor fixes
* fixups
* Major simplification of lets_split layout into more standard raise/lower/special layers
* Remove layer songs, add to readme
* Formatting
* Switch a few keys around for reachability
* Add windows/mac specific layers
* simplify layers
* Update README
* Fix legends
* Invert numpad and put Del in upper right corner
* Disable arrow keys on Raise, add build instructions
* Move dz60 keymap to its own branch
* Remove redundant configuration
* Change volume and sleep keycodes to standard
* Removing empty rules.mk
* Changing layer defines to enum
* Adding comment to explain reason for swapping KC_TRNS and KC_NO fillers
* adding a custom mf68 keymap
* added custom tada68 keymap
* readme edit on tada68 map
* added mac fast-forward and rewind keybindings to tada68 emdarcher keymap
* tada68 keymap documentation and edits
* cleanup and edits
* typo fix in emdarcher's tada68 keymap
* cleaning up emdarcher keymap for tada68
* cleaned up emdarcher keymap for mf68
