mirror of https://github.com/firewalkwithm3/qmk_firmware.git synced 2024-11-22 19:40:29 +08:00

History

Nick Brassel 75111e967f Disable subsystems repo-wide. (#11449 )		2021-01-10 09:52:49 +11:00
..
keymaps/default	Update Vinta (#4705 )	2018-12-21 18:39:25 -08:00
chconf.h	Disable subsystems repo-wide. (#11449 )	2021-01-10 09:52:49 +11:00
config.h	Remove CUSTOM_MATRIX option from diode direction (#5090 )	2019-02-18 08:49:51 -08:00
halconf.h	ChibiOS upgrade: keyboard conf migrations (phase 1) (#10418 )	2020-12-05 21:13:58 +11:00
info.json	65 ansi blocker everywhere (everywhere I can find) (#6805 )	2019-09-25 12:55:27 -07:00
readme.md	Fix capitalisation of "GitHub" (#9184 )	2020-05-25 19:43:14 -07:00
rules.mk	Move CORTEX_ENABLE_WFI_IDLE=TRUE to rules.mk files.	2020-01-28 23:45:42 +11:00
vinta.c	[Keyboard] Add akegata denki device one (#9690 )	2020-07-27 18:40:57 -07:00
vinta.h	65 ansi blocker everywhere (everywhere I can find) (#6805 )	2019-09-25 12:55:27 -07:00

readme.md

Vinta

This is an ARM-powered 65% keyboard PCB with USB Mini B connector and breakout for optional RGB underglow.

Keyboard Maintainer: Peioris and on GitHub
Hardware Supported: Vinta with STM32F042K6T6
Hardware Availability: Private Groupbuy (will post on Reddit once QMK has RGB underglow working)

Make example for this keyboard (after setting up your build environment):

make vinta:default

See build environment setup then the make instructions for more information.

Developer's Note

STM32F042xx chips does not allow jumping to bootloader without BOOT0 being set to high, therefore it is impossible to enter the bootloader from sending a RESET keycode nor using bootmagic or bootmagic lite.
The only way to enter bootloader is to hold the BOOT0 button while the keyboard is powering up or after a power reset (done by pressing the reset switch or sending a RESET keycode).