fern/qmk-firmware
1
0
Fork 0
mirror of https://github.com/firewalkwithm3/qmk_firmware.git synced 2024-11-22 03:21:48 +08:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
qmk-firmware/keyboards/lz/erghost
History
Ryan 314f6c1ddb
Move backlight config to data driven (#19910)
2023-02-26 08:37:57 +11:00
..
keymaps Remove legacy keycodes, part 5 (#18710) 2022-10-15 22:29:43 +01:00
config.h Move backlight config to data driven (#19910) 2023-02-26 08:37:57 +11:00
erghost.c [Keyboard] Add LZ erGhost (#15451) 2021-12-24 17:47:35 -08:00
erghost.h [Keyboard] Add LZ erGhost (#15451) 2021-12-24 17:47:35 -08:00
info.json Move backlight config to data driven (#19910) 2023-02-26 08:37:57 +11:00
matrix.c [Keyboard] Add LZ erGhost (#15451) 2021-12-24 17:47:35 -08:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

erGhost

erGhost

LZ erGhost PCB

  • Keyboard Maintainer: Mechlovin
  • Hardware Supported: erGhost PCB, Atmega32u4
  • Hardware Availability: GB

Make example for this keyboard (after setting up your build environment):

make lz/erghost:default

Flashing example for this keyboard:

make lz/erghost:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available
  • Physical reset button: Press the button on the back of the PCB