fern/qmk-firmware
1
0
Fork 0
mirror of https://github.com/firewalkwithm3/qmk_firmware.git synced 2024-11-22 11:30:30 +08:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
qmk-firmware/keyboards/rgbkb/sol3
History
Ryan 7e0299117b
Move encoder config to data driven (#19923) 
Co-authored-by: Nick Brassel <nick@tzarc.org>
2023-02-26 09:45:12 +11:00
..
keymaps Update use of legacy keycodes (#19120) 2022-11-22 22:07:47 +11:00
rev1 Move encoder config to data driven (#19923) 2023-02-26 09:45:12 +11:00
config.h Move encoder config to data driven (#19923) 2023-02-26 09:45:12 +11:00
halconf.h
mcuconf.h
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00
sol3.c
sol3.h

readme.md

Sol 3

Sol 3

An extensible split keyboard with hotswap sockets and per-key RGB lighting.

  • Keyboard Maintainer: XScorpion2, RGBKB
  • Hardware Supported: RGBKB Sol 3 rev1 (STM32F303)
  • Hardware Availability: RGBKB.net

Make example for this keyboard (after setting up your build environment):

make rgbkb/sol3/rev1:default

Flashing example for this keyboard:

make rgbkb/sol3/rev1:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

To reset the board into bootloader mode, do one of the following:

  • Keycode in layout: Press the key mapped to QK_BOOT if it is available (Adjust + R by default)
  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard (also erases persistent settings)