fern/qmk-firmware
1
0
Fork 0
mirror of https://github.com/firewalkwithm3/qmk_firmware.git synced 2024-11-22 11:30:30 +08:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
qmk-firmware/keyboards/takashicompany/center_enter
History
Ryan 7e0299117b
Move encoder config to data driven (#19923) 
Co-authored-by: Nick Brassel <nick@tzarc.org>
2023-02-26 09:45:12 +11:00
..
keymaps Remove legacy international keycodes (#18588) 2022-10-09 14:51:09 +11:00
center_enter.c [Keyboard] Add "Center x Enter" (#14790) 2021-10-11 19:41:50 -07:00
center_enter.h [Keyboard] Add "Center x Enter" (#14790) 2021-10-11 19:41:50 -07:00
config.h Move encoder config to data driven (#19923) 2023-02-26 09:45:12 +11:00
info.json Move encoder config to data driven (#19923) 2023-02-26 09:45:12 +11:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

Center x Enter

image

A 30% keyboard with the enter key placed in the center. Option to install a rotary encoder is also available. VIA (Remap) is also supported.

Make example for this keyboard (after setting up your build environment):

make takashicompany/center_enter:default

Flashing example for this keyboard:

make takashicompany/center_enter:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available