fern/qmk-firmware
1
0
Fork 0
mirror of https://github.com/firewalkwithm3/qmk_firmware.git synced 2024-11-22 19:40:29 +08:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
qmk-firmware/keyboards/sixkeyboard
History
Ryan 4869b8061c
Move ortho & numpad layouts to data driven (#20183) 
Co-authored-by: Nick Brassel <nick@tzarc.org>
2023-03-29 15:54:34 +11:00
..
keymaps Remove unnecessary backslash-escapes in default keymaps (#15472) 2021-12-14 12:41:16 +00:00
config.h Debounce defines cleanup (#19742) 2023-02-03 19:19:58 +00:00
info.json Move ortho & numpad layouts to data driven (#20183) 2023-03-29 15:54:34 +11:00
matrix.c Move ortho & numpad layouts to data driven (#20183) 2023-03-29 15:54:34 +11:00
readme.md Modified URLs to point to new locations 2019-01-13 09:11:18 -08:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00
sixkeyboard.c Move ortho & numpad layouts to data driven (#20183) 2023-03-29 15:54:34 +11:00

readme.md

Techkeys SixKeyBoard

Keyboard Maintainer: QMK Community
Hardware Supported: Techkeys SixKeyBoard PCB
Hardware Availability: Techkeys

Make example for this keyboard (after setting up your build environment):

make sixkeyboard:default

See build environment setup then the make instructions for more information.

Hardware Info

The schematic is like this:

 switches       leds
,--+--+--.   ,--+--+--.
|C7|B7|B5|   |C6|B6|B4|
+--+--+--+   +--+--+--+
|D6|D1|D4|   |D5|D2|D3|
`--+--+--'   `--+--+--'

The LED on the bottom is C4. All 7 of the leds are turned on when the keyboard boots-up in the sixkeyboard.c file - backlight_enable is not required. The MCU is an Atmega16u2, so the flash memory is limited to 0x3000 bytes - the current setup uses just about all of that! I'm sure things can be opitimised a bit.

There is a jumper on the bottom of the board (next to the USB port) that serves as a reset button - I drilled a hole in my case to allow for quick access via a screwdriver/metal object.