qmk-firmware/keyboards/caffeinated/serpent65
2021-09-12 15:27:29 +10:00
..
keymaps [Keyboard] Add Caffeinated Studios Serpent65 (#12578) 2021-04-13 20:08:42 -07:00
chconf.h [Keyboard] Add Caffeinated Studios Serpent65 (#12578) 2021-04-13 20:08:42 -07:00
config.h [Keyboard] Add Caffeinated Studios Serpent65 (#12578) 2021-04-13 20:08:42 -07:00
info.json Remove width, height and key_count from info.json (#14274) 2021-09-12 14:04:56 +10:00
readme.md [Keyboard] Add Caffeinated Studios Serpent65 (#12578) 2021-04-13 20:08:42 -07:00
rules.mk Remove BLUETOOTH_ENABLE from keyboard-level rules.mk (#14379) 2021-09-12 15:27:29 +10:00
serpent65.c [Keyboard] Add Caffeinated Studios Serpent65 (#12578) 2021-04-13 20:08:42 -07:00
serpent65.h [Keyboard] Add Caffeinated Studios Serpent65 (#12578) 2021-04-13 20:08:42 -07:00

Caffeinated Studios' Serpent65

Serpent65

The Serpent65 is a 65% created by Caffeinated Studios. The board supports ANSI and ISO modifiers as well as split backspace and stepped/non-stepped caps lock.

The PCB is an ARM powered board utilizing the STM32F072CBT6 mcu, designed by BlindAssassin111. The PCB is designed to work with the universal daughterboard and a 4in (~100mm) 4 pin JST SR cable with reversed pinout (pin 1 of both connectors is the same wire etc.).

On the PCB is a single button for a reset for flashing. As well, there is a Segger J-Link 6-pin Needle Adapter footprint for reflashing the mcu as a backup in case of a bootloader issue.

  • Keyboard Maintainer: jrfhoutx
  • Hardware Supported: Serpent65
  • Hardware Availability: Coming Soon

Make example for this keyboard (after setting up your build environment):

make caffeinated/serpent65:default

Flashing example for this keyboard:

make caffeinated/serpent65:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.