qmk-firmware/keyboards/rgbkb/zygomorph
XScorpion2 4cdb86c730 [Keyboard] Create RGBKB Folder (#5858)
* Move Sol, Zen, & Zygomorph keyboards to RGBKB folder

* Updated default keymaps

* Fixing more areas due too folder moves

* Fixing Zen layer numbers

* Fixing zygomorph layer comments

* Fixing Colmak comments

* Fixing Sol Colmak readme

* Macro alignment

* Zen rev2 configuration json

* Fixing sol ifdef

* Fixing Sol info.json
2019-05-14 11:58:56 -07:00
..
common [Keyboard] Create RGBKB Folder (#5858) 2019-05-14 11:58:56 -07:00
keymaps [Keyboard] Create RGBKB Folder (#5858) 2019-05-14 11:58:56 -07:00
rev1 [Keyboard] Create RGBKB Folder (#5858) 2019-05-14 11:58:56 -07:00
config.h [Keyboard] Create RGBKB Folder (#5858) 2019-05-14 11:58:56 -07:00
readme.md [Keyboard] Create RGBKB Folder (#5858) 2019-05-14 11:58:56 -07:00
rules.mk [Keyboard] Create RGBKB Folder (#5858) 2019-05-14 11:58:56 -07:00
zygomorph.c [Keyboard] Create RGBKB Folder (#5858) 2019-05-14 11:58:56 -07:00
zygomorph.h [Keyboard] Create RGBKB Folder (#5858) 2019-05-14 11:58:56 -07:00

Zygomorph

Zygomorph

Zygomorph is the thinnest keyboard with a fully enclosed case. It's only 3.2mm thick below the switches, including screws. It can be used in 5x6 and 4x6 split, or 5x12 and 4x12 combined. It has per-key RGB, supports Kailh Choc and MX switches, and has 10 rotary encoder positions per half (only one can be used per half). The board has pre-soldered components, including type C ports and ATmega32U4. The build guide can be found here.

Keyboard Maintainer: Legonut
Hardware Supported: Zygomorph R1.0
Hardware Availability: RGBKB

Make example for this keyboard (after setting up your build environment):

make rgbkb/zygomorph:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.