fern/qmk-firmware
1
0
Fork 0
mirror of https://github.com/firewalkwithm3/qmk_firmware.git synced 2024-11-22 11:30:30 +08:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
qmk-firmware/keyboards/darmoshark/k3
History
Joel Challis 831deac212
Migrate build target markers to keyboard.json (#23293)
2024-03-30 11:31:50 +00:00
..
keymaps [Keyboard] Add darmoshark k3 (#21980) 2023-12-23 19:01:42 -08:00
config.h [Keyboard] Add darmoshark k3 (#21980) 2023-12-23 19:01:42 -08:00
halconf.h [Keyboard] Add darmoshark k3 (#21980) 2023-12-23 19:01:42 -08:00
keyboard.json Migrate build target markers to keyboard.json (#23293) 2024-03-30 11:31:50 +00:00
mcuconf.h [Keyboard] Add darmoshark k3 (#21980) 2023-12-23 19:01:42 -08:00
readme.md [Keyboard] Add darmoshark k3 (#21980) 2023-12-23 19:01:42 -08:00

readme.md

K3 QMK

Make example for this keyboard (after setting up your build environment):

make darmoshark/k3:default

Flashing example for this keyboard:

make darmoshark/k3:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available