qmk-firmware/keyboards/charue/sunsetter
Ryan 9dcd03b6ca
Set BOOTLOADER = stm32-dfu for all applicable STM32 boards (#12956)
* Set bootloader to stm32-dfu for STM32F303

* Set bootloader to stm32-dfu for STM32F0x2

* Set bootloader to stm32-dfu for STM32F4x1

* Set bootloader to stm32duino for sowbug

* Delete redundant bootloader_defs headers

* Add some missing MCU name comments

* Move APM32 dfu-suffix overrides underneath bootloader

* Remove redundant STM32_BOOTLOADER_ADDRESS defines/rules
2021-06-08 19:48:46 +10:00
..
keymaps [Keyboard] Add Charue Design's Sunsetter (#12547) 2021-05-11 20:42:56 +02:00
chconf.h [Keyboard] Add Charue Design's Sunsetter (#12547) 2021-05-11 20:42:56 +02:00
config.h [Keyboard] Add Charue Design's Sunsetter (#12547) 2021-05-11 20:42:56 +02:00
info.json [Keyboard] Add Charue Design's Sunsetter (#12547) 2021-05-11 20:42:56 +02:00
mcuconf.h [Keyboard] Add Charue Design's Sunsetter (#12547) 2021-05-11 20:42:56 +02:00
readme.md [Keyboard] Add Charue Design's Sunsetter (#12547) 2021-05-11 20:42:56 +02:00
rules.mk Set BOOTLOADER = stm32-dfu for all applicable STM32 boards (#12956) 2021-06-08 19:48:46 +10:00
sunsetter.c [Keyboard] Add Charue Design's Sunsetter (#12547) 2021-05-11 20:42:56 +02:00
sunsetter.h [Keyboard] Add Charue Design's Sunsetter (#12547) 2021-05-11 20:42:56 +02:00

Sunsetter

Sunsetter

A 65 + 10% F-Key Column Keyboard kit made and sold by Charue Design. More info on charue-design.com

Jumping to Bootloader

To enter the bootloader, you may use bootmagic by holding Space+B or by holding the reset button located at the back of the PCB, right beside the left shift key, for a few seconds.

Make example for this keyboard (after setting up your build environment):

make charue/sunsetter:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.