mirror of
https://github.com/firewalkwithm3/qmk_firmware.git
synced 2024-11-22 19:40:29 +08:00
391c0428c9
* Add support for Envious.Design Keyboards Add various RP2040 keyboards I've designed. * Fixed missing newlines at EOF. * Ran CLANG-FORMAT and sorted out any potential issues. * Gave keyboards all unique product IDs * Made requested changes. * removed all VIAL related code * sorted out license on all *.h or *.h files * removed outdated RESET Keycode * missed some VIAL bits * Made suggested changes * Made Suggested Changes * missed one file to change. * Attempted fix of CI issues * Update .gitmodules * Revert "Update .gitmodules" This reverts commit f4bace51621ed0c5bd40c729fa1c6339f665f0b7. * hopefully fixed all CI and QMK lint issues * resolve more CI errors and a couple typos * fixed last remaining issue as of now * made requested changes * further more on suggested change * Delete README.md * derpy workaround to change case of readme * finished up 65M firmware via does not work, I will investigate another time. * re-did a lot of 65M firmware bits, also fixed via for this board * corrected mistake in firmware * made suggested change to info.json for 65m/60F * finished 65M non via keymap and re-sorted via keymap * Update keyboards/enviousdesign/tkl/rgb/keymaps/default/keymap.c * Update keyboards/enviousdesign/tkl/rgb/keymaps/default/keymap.c * Apply suggestions from code review Verified updated Info.json works for aforementioned keyboards, * Follow-up commit with aforementioned suggested changes * Apply suggestions from code review correction to a couple typos pointed out. * follow-up removed some un-needed Readmes and corrected a mistake in 60F via keymap * Apply suggestions from code review * Added images of PCB to each Keyboard README * Apply suggestions from code review * Update keyboards/enviousdesign/60f/readme.md * Added missing aspects of info.json and corrected RGB_DI_PIN to WS2812_DI_PIN in RGB keyboard * made requested changes * Update config.h * used QMK migrate to update info.json * Apply suggestions from code review * Update keyboards/enviousdesign/65m/info.json * renamed named keyboards as suggested and added commission keyboard to repo * renamed file to hopefully please lint * renamed things to be all lower case since lint doesn't appear to look for upper case * updated keymap.c and removed unnecessary file * fixed readme and a couple other bits * converted various aspects to json information * attempt fix for lint error * fix some issues I overlooked * Apply suggestions from code review * moved some folders about as suggested * Made suggested changes * Apply suggestions from code review * removed outdated config.h * fixed errors in 65M and mini1800 * Apply suggestions from code review * Update keyboards/enviousdesign/delirium/rev1/info.json * Update keyboards/enviousdesign/65m/info.json * Apply suggestions from code review |
||
|---|---|---|
| .. | ||
| rev1 | ||
| readme.md | ||
EnvKB MCRO
A small 12 Key macro pad for various uses
- Keyboard Maintainer: Envious-Data
- Hardware Supported: EnvKB MCRO (Pi Pico)
- Hardware Availability: GitHub
Make example for this keyboard (after setting up your build environment):
make enviousdesign/mcro:default
Flashing example for this keyboard:
make enviousdesign/mcro:default:flash
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Bootloader
Enter the bootloader in 3 ways:
- Bootmagic reset: Hold down the top left key and plug in the keyboard. This will also clear the emulated EEPROM, so it is a good first step if the keyboard is misbehaving.
- Physical reset: Hold down the
BOOTSELbutton on the Pi Pico, then either plug the board in or press theRESETbutton. - Keycode in layout: There is no key mapped to
QK_BOOTin the pre-created keymaps, but you may assign this key in any keymaps you create.
After entering the bootloader through one of the three methods above, the keyboard will appear as a USB mass storage device named RPI-RP2. If the CLI is unable to find this device, the compiled .uf2 file can be manually copied to it. The keyboard will reboot on completion with the new firmware loaded.