qmk-firmware/keyboards/cradio
Albert Y 546e6a15dc
[Keyboard] Cradio keyboard (#14946)
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: filterpaper <filterpaper@localhost>
2021-10-27 08:02:21 -07:00
..
keymaps/default [Keyboard] Cradio keyboard (#14946) 2021-10-27 08:02:21 -07:00
config.h [Keyboard] Cradio keyboard (#14946) 2021-10-27 08:02:21 -07:00
cradio.c [Keyboard] Cradio keyboard (#14946) 2021-10-27 08:02:21 -07:00
cradio.h [Keyboard] Cradio keyboard (#14946) 2021-10-27 08:02:21 -07:00
info.json [Keyboard] Cradio keyboard (#14946) 2021-10-27 08:02:21 -07:00
readme.md [Keyboard] Cradio keyboard (#14946) 2021-10-27 08:02:21 -07:00
rules.mk [Keyboard] Cradio keyboard (#14946) 2021-10-27 08:02:21 -07:00

Cradio keyboards

Cradio

Cradio are low-profile 34-key split-keyboards designed by @davidphilipbarr, with no diodes and direct micro-controller pin wiring.

Keyboard Info

  • Keyboard Maintainer: davidphilipbarr
  • Hardware Supported:
  • Hardware Availability: PCBs can be printed with gerber files from the repository

Make examples for this keyboard (after setting up your build environment):

make cradio:default

Firmware uses EE_HANDS split handedness by default. Each halve should be flashed once with the following:

make cradio:default:dfu-split-left
make cradio:default:dfu-split-right

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the top left key on the left half (or the top right right key on the right half) and plug in the controller on that side.
  • Physical reset button: Briefly press the reset button soldered on the PCB.
  • Keycode in layout: Press the key mapped to RESET if it is configured.