fern/qmk-firmware
1
0
Fork 0
mirror of https://github.com/firewalkwithm3/qmk_firmware.git synced 2024-11-22 19:40:29 +08:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
qmk-firmware/keyboards/skeletonkbd/skeletonnumpad
History
Ryan 2da0827d4f
Remove matrix size defines (#19581)
2023-02-17 16:08:25 +11:00
..
keymaps Remove legacy keycodes, part 5 (#18710) 2022-10-15 22:29:43 +01:00
config.h Remove matrix size defines (#19581) 2023-02-17 16:08:25 +11:00
info.json Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00
skeletonnumpad.c [Keyboard] Add SkeletonNumPad (#16753) 2022-04-28 11:16:21 -07:00
skeletonnumpad.h [Keyboard] Add SkeletonNumPad (#16753) 2022-04-28 11:16:21 -07:00

readme.md

SkeletonNumPad

skeletonnumpad

Simple NumPad with acrylic case.

Make example for this keyboard (after setting up your build environment):

make skeletonkbd/skeletonnumpad:default

Flashing example for this keyboard:

make skeletonkbd/skeletonnumpad:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available