mirror of https://github.com/firewalkwithm3/qmk_firmware.git synced 2024-11-23 03:50:28 +08:00

History

Ryan 5af1799735 Remove BLUETOOTH_ENABLE from keyboard-level rules.mk (#14379 )		2021-09-12 15:27:29 +10:00
..
keymaps	[Keyboard] add ogurec (#13242 )	2021-07-22 00:17:47 -07:00
left_pm	[Keyboard] add ogurec (#13242 )	2021-07-22 00:17:47 -07:00
right_pm	[Keyboard] add ogurec (#13242 )	2021-07-22 00:17:47 -07:00
config.h	[Keyboard] add ogurec (#13242 )	2021-07-22 00:17:47 -07:00
info.json	Remove width, height and key_count from info.json (#14274 )	2021-09-12 14:04:56 +10:00
ogurec.c	[Keyboard] add ogurec (#13242 )	2021-07-22 00:17:47 -07:00
ogurec.h	[Keyboard] add ogurec (#13242 )	2021-07-22 00:17:47 -07:00
readme.md	[Keyboard] add ogurec (#13242 )	2021-07-22 00:17:47 -07:00
rules.mk	Remove BLUETOOTH_ENABLE from keyboard-level rules.mk (#14379 )	2021-09-12 15:27:29 +10:00

ogurec

ogurec is a reversible 12u x 3u ortholinear keyboard that offers left-sided and right-sided PM placement.

The default ogurec keymap is for left-sided PM placement.

When flashing ogurec with the PM soldered onto the right side, follow the second example below and use: make ogure/right_pm:default

Keyboard Maintainer: H. Bond
Hardware Supported: ogurec (https://github.com/drhigsby/ogurec)
Hardware Availability: open source 3DP case available here https://github.com/drhigsby (case creator: https://github.com/dpalka15)

Make example for this keyboard (after setting up your build environment):

make ogurec:default
make ogurec/right_pm:default

To place the keyboard into bootloader mode, solder a reset switch onto the PCB and press it OR short the GND and RST pins on the pro micro.

Flashing example for this keyboard:

make ogurec:default:flash
make ogurec/right_pm:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.