qmk-firmware/keyboards/xenon/config.h
Kyrre Havik 719881c2ee
[Keyboard] Add Xenon keyboard (#15915)
Co-authored-by: Sam Mohr <smores56@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
2022-02-04 19:06:49 -08:00

66 lines
1.9 KiB
C

/*
Copyright 2020 Kyrre Havik Eriksen
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x3404
#define DEVICE_VER 0x0001
#define PRODUCT Xenon
/* key matrix size */
/* Rows are doubled up */
#define MATRIX_ROWS 10
#define MATRIX_COLS 7
// wiring
#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }
#define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4 }
#define ENCODERS_PAD_A { B6 }
#define ENCODERS_PAD_B { B5 }
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/*
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
*/
#define SOFT_SERIAL_PIN D2
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
#ifdef OLED_ENABLE
#define OLED_DISPLAY_128X32
#endif
// If you are using an Elite C rev3 on the slave side, uncomment the lines below:
// #define SPLIT_USB_DETECT
// #define NO_USB_STARTUP_CHECK