mirror of https://github.com/firewalkwithm3/qmk_firmware.git synced 2024-11-23 03:50:28 +08:00

History

Ryan 9dbee3e23d Remove useless "ifdef KEYBOARD_*" (#20078 ) Co-authored-by: Nick Brassel <nick@tzarc.org>		2023-03-16 20:18:33 +11:00
..
keymaps	Remove legacy keycodes, part 4 (#18683 )	2022-10-13 18:28:14 +01:00
left_pm	Remove useless "ifdef KEYBOARD_*" (#20078 )	2023-03-16 20:18:33 +11:00
right_pm	Remove useless "ifdef KEYBOARD_*" (#20078 )	2023-03-16 20:18:33 +11:00
config.h	Move matrix config to info.json, part 4 (#20001 )	2023-03-11 00:00:24 +11:00
info.json	Move matrix config to info.json, part 4 (#20001 )	2023-03-11 00:00:24 +11:00
readme.md	[Keyboard] move @drhigsby 's boards into /drhigsby (#16041 )	2022-01-31 20:36:16 -08:00
rules.mk	Migrate `MCU` and `BOOTLOADER` to data-driven (#19529 )	2023-02-08 18:41:46 +11:00

ogurec

ogurec is a reversible 12u x 3u ortholinear keyboard that offers left-sided and right-sided PM placement.

The default ogurec keymap is for left-sided PM placement.

When flashing ogurec with the PM soldered onto the right side, follow the second example below and use: make ogure/right_pm:default

Keyboard Maintainer: H. Bond
Hardware Supported: ogurec (https://github.com/drhigsby/ogurec)
Hardware Availability: open source 3DP case available here https://github.com/drhigsby (case creator: https://github.com/dpalka15)

Make example for this keyboard (after setting up your build environment):

make drhigsby/ogurec:default
make drhigsby/ogurec/right_pm:default

To place the keyboard into bootloader mode, solder a reset switch onto the PCB and press it OR short the GND and RST pins on the pro micro.

Flashing example for this keyboard:

make drhigsby/ogurec:default:flash
make drhigsby/ogurec/right_pm:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.