fern/qmk-firmware
1
0
Fork 0
mirror of https://github.com/firewalkwithm3/qmk_firmware.git synced 2024-11-22 19:40:29 +08:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
qmk-firmware/keyboards/cannonkeys/serenity
History
Ryan 47966dc2a6
Migrate rgblight.pin and RGB_DI_PIN to ws2812.pin (#20303)
2023-04-06 18:00:54 +10:00
..
keymaps Remove deprecated Quantum keycodes (#19712) 2023-01-29 16:44:16 +00:00
config.h [Keyboard] Add Serenity PCB (#18705) 2022-11-12 16:59:17 -08:00
halconf.h [Keyboard] Add Serenity PCB (#18705) 2022-11-12 16:59:17 -08:00
info.json Migrate rgblight.pin and RGB_DI_PIN to ws2812.pin (#20303) 2023-04-06 18:00:54 +10:00
mcuconf.h [Keyboard] Add Serenity PCB (#18705) 2022-11-12 16:59:17 -08:00
readme.md [Keyboard] Add Serenity PCB (#18705) 2022-11-12 16:59:17 -08:00
rules.mk [Keyboard] Add Serenity PCB (#18705) 2022-11-12 16:59:17 -08:00

readme.md

Serenity

A calming F13 TKL from HoodrowThrillson

Make example for this keyboard (after setting up your build environment):

make cannonkeys/serenity:default

Flashing example for this keyboard:

make cannonkeys/serenity:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Swap the boot switch on the back of the PCB to "1" and hit the reset button
  • Keycode in layout: Press the key mapped to RESET if it is available