mirror of https://github.com/firewalkwithm3/qmk_firmware.git synced 2024-11-22 11:30:30 +08:00

History

Ryan a8d440e4e0 Tidy up NKRO_ENABLE rules (#15382 )		2021-12-09 16:05:44 +11:00
..
keymaps	fixed oled in bongocat keymap and fixed encoder direction (#15232 )	2021-11-28 20:45:24 +00:00
config.h	fixed oled in bongocat keymap and fixed encoder direction (#15232 )	2021-11-28 20:45:24 +00:00
gfxfont.c	added 0xCB Static (#13047 )	2021-07-02 19:38:53 +01:00
info.json	Remove width, height and key_count from info.json (#14274 )	2021-09-12 14:04:56 +10:00
readme.md	fixed oled in bongocat keymap and fixed encoder direction (#15232 )	2021-11-28 20:45:24 +00:00
rules.mk	Tidy up NKRO_ENABLE rules (#15382 )	2021-12-09 16:05:44 +11:00
static.c	added 0xCB Static (#13047 )	2021-07-02 19:38:53 +01:00
static.h	0xCB Static: fix `qmk info` and Configurator issues (#13856 )	2021-08-02 17:52:46 -07:00

readme.md

0xCB Static

Macro keypad

Keyboard Maintainer: Conor Burns
Hardware Supported: https://github.com/0xCB-dev/0xcb-static
Hardware Availability: On CandyKeys or order your own parts - the hardware in the repo is Open Source :D
PCB renders :)

More Pictures here

To go to bootloader press ESC while plugging in or hold the RESET switch, then hold the BOOT switch, release RESET, release BOOT. The board should now appear in lsusb (or device manager).

Make example for this keyboard (after setting up your build environment):

make 0xcb/static:default

Flashing example for this keyboard:

make 0xcb/static:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.