fern/qmk-firmware
1
0
Fork 0
mirror of https://github.com/firewalkwithm3/qmk_firmware.git synced 2024-11-22 11:30:30 +08:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
qmk-firmware/keyboards/dtisaac/dosa40rgb
History
Ryan a8d440e4e0
Tidy up NKRO_ENABLE rules (#15382)
2021-12-09 16:05:44 +11:00
..
keymaps/default [Keyboard] Add define GPIO into Dosa40RGB (#15252) 2021-11-29 00:21:29 -08:00
config.h Require explicit enabling of RGB Matrix modes (#15018) 2021-11-15 10:41:04 -08:00
dosa40rgb.c [Keyboard] Add Dosa40RGB + dtisaac01 (#14476) 2021-09-17 23:52:18 -07:00
dosa40rgb.h [Keyboard] Fix dosa40rgb compilation issues (#14491) 2021-09-18 00:53:16 -07:00
info.json [Keyboard] Add Dosa40RGB + dtisaac01 (#14476) 2021-09-17 23:52:18 -07:00
readme.md [Keyboard] Add cg108 keyboard and fix keymap Dosa40rgb (#14753) 2021-10-09 14:55:00 -07:00
rules.mk Tidy up NKRO_ENABLE rules (#15382) 2021-12-09 16:05:44 +11:00

readme.md

dosa40rgb

dosa40rgb

A 40 percent keyboard dosa40rgb Bluetooth Low Energy

  • Keyboard Maintainer: DTIsaac
  • Hardware Supported: ATmega32U4 + AdafruitBLE SPI

Make example for this keyboard (after setting up your build environment):

make dtisaac/dosa40rgb:default

Flashing example for this keyboard:

make dtisaac/dosa40rgb:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to RESET if it is available