fern/qmk-firmware
1
0
Fork 0
mirror of https://github.com/firewalkwithm3/qmk_firmware.git synced 2024-11-22 11:30:30 +08:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
qmk-firmware/keyboards/tkw/grandiceps
History
Ryan a8d440e4e0
Tidy up NKRO_ENABLE rules (#15382)
2021-12-09 16:05:44 +11:00
..
keymaps/default [Core] Change OLED task function to be boolean (#14864) 2021-11-02 09:42:50 +11:00
rev2 Rework and expand Pointing Device support (#14343) 2021-11-14 22:03:24 -08:00
config.h [Keyboard] Update Grandiceps to Rev2 (#14618) 2021-09-29 09:55:34 -07:00
grandiceps.c Keyboard/grandiceps (#11933) 2021-03-15 17:42:09 +00:00
grandiceps.h Keyboard/grandiceps (#11933) 2021-03-15 17:42:09 +00:00
halconf.h Keyboard/grandiceps (#11933) 2021-03-15 17:42:09 +00:00
info.json [Keyboard] Update Grandiceps to Rev2 (#14618) 2021-09-29 09:55:34 -07:00
mcuconf.h Keyboard/grandiceps (#11933) 2021-03-15 17:42:09 +00:00
readme.md [Keyboard] Update Grandiceps to Rev2 (#14618) 2021-09-29 09:55:34 -07:00
rules.mk Tidy up NKRO_ENABLE rules (#15382) 2021-12-09 16:05:44 +11:00

readme.md

grandiceps

grandiceps

ARM split keyboard with RGB underglow and encoders.

  • Keyboard Maintainer: vattern
  • Hardware Supported: f411 blackpill
  • Hardware Availability: grandiceps

There are two versions of the Grandiceps. Please use the appropriate firmware for your board.

  • Revision 2 has I2C eeprom and support for a Pimoroni trackball.

Make example for this keyboard (after setting up your build environment):

make tkw/grandiceps:default
make tkw/grandiceps/rev2:default

Flashing example for this keyboard:

make tkw/grandiceps:default:flash
make tkw/grandiceps/rev2:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset buttons: Hold down the BOOT0 button and then briefly press the NRST button on the BlackPill PCB.
  • Keycode in layout: Press the key mapped to RESET if it is available