mirror of
https://github.com/firewalkwithm3/qmk_firmware.git
synced 2024-11-22 11:30:30 +08:00
108 lines
3.5 KiB
C
108 lines
3.5 KiB
C
/* Copyright 2019 ishtob
|
|
* Driver for haptic feedback written for QMK
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#pragma once
|
|
|
|
#include <stdint.h>
|
|
#include <stdbool.h>
|
|
|
|
#ifndef HAPTIC_DEFAULT_FEEDBACK
|
|
# define HAPTIC_DEFAULT_FEEDBACK 0
|
|
#endif
|
|
#ifndef HAPTIC_DEFAULT_MODE
|
|
# define HAPTIC_DEFAULT_MODE DRV2605L_DEFAULT_MODE
|
|
#endif
|
|
|
|
/* EEPROM config settings */
|
|
typedef union {
|
|
uint32_t raw;
|
|
struct {
|
|
bool enable : 1;
|
|
uint8_t mode : 7;
|
|
bool buzz : 1;
|
|
uint8_t dwell : 7;
|
|
uint8_t amplitude : 8;
|
|
uint8_t feedback : 2;
|
|
bool cont : 1;
|
|
uint8_t reserved : 5;
|
|
};
|
|
} haptic_config_t;
|
|
|
|
_Static_assert(sizeof(haptic_config_t) == sizeof(uint32_t), "Haptic EECONFIG out of spec.");
|
|
|
|
typedef enum HAPTIC_FEEDBACK {
|
|
KEY_PRESS,
|
|
KEY_PRESS_RELEASE,
|
|
KEY_RELEASE,
|
|
HAPTIC_FEEDBACK_MAX,
|
|
} HAPTIC_FEEDBACK;
|
|
|
|
void haptic_init(void);
|
|
void haptic_task(void);
|
|
void eeconfig_debug_haptic(void);
|
|
void haptic_enable(void);
|
|
void haptic_disable(void);
|
|
void haptic_toggle(void);
|
|
void haptic_feedback_toggle(void);
|
|
void haptic_mode_increase(void);
|
|
void haptic_mode_decrease(void);
|
|
void haptic_mode(uint8_t mode);
|
|
void haptic_reset(void);
|
|
void haptic_set_feedback(uint8_t feedback);
|
|
void haptic_set_mode(uint8_t mode);
|
|
void haptic_set_dwell(uint8_t dwell);
|
|
void haptic_set_buzz(uint8_t buzz);
|
|
void haptic_buzz_toggle(void);
|
|
uint8_t haptic_get_enable(void);
|
|
uint8_t haptic_get_mode(void);
|
|
uint8_t haptic_get_feedback(void);
|
|
void haptic_dwell_increase(void);
|
|
void haptic_dwell_decrease(void);
|
|
void haptic_toggle_continuous(void);
|
|
void haptic_cont_increase(void);
|
|
void haptic_cont_decrease(void);
|
|
|
|
void haptic_play(void);
|
|
void haptic_shutdown(void);
|
|
void haptic_notify_usb_device_state_change(void);
|
|
|
|
#ifdef HAPTIC_ENABLE_PIN_ACTIVE_LOW
|
|
# ifndef HAPTIC_ENABLE_PIN
|
|
# error HAPTIC_ENABLE_PIN not defined
|
|
# endif
|
|
# define HAPTIC_ENABLE_PIN_WRITE_ACTIVE() gpio_write_pin_low(HAPTIC_ENABLE_PIN)
|
|
# define HAPTIC_ENABLE_PIN_WRITE_INACTIVE() gpio_write_pin_high(HAPTIC_ENABLE_PIN)
|
|
#else
|
|
# define HAPTIC_ENABLE_PIN_WRITE_ACTIVE() gpio_write_pin_high(HAPTIC_ENABLE_PIN)
|
|
# define HAPTIC_ENABLE_PIN_WRITE_INACTIVE() gpio_write_pin_low(HAPTIC_ENABLE_PIN)
|
|
#endif
|
|
|
|
#ifdef HAPTIC_ENABLE_STATUS_LED_ACTIVE_LOW
|
|
# ifndef HAPTIC_ENABLE_STATUS_LED
|
|
# error HAPTIC_ENABLE_STATUS_LED not defined
|
|
# endif
|
|
# define HAPTIC_ENABLE_STATUS_LED_WRITE_ACTIVE() gpio_write_pin_low(HAPTIC_ENABLE_STATUS_LED)
|
|
# define HAPTIC_ENABLE_STATUS_LED_WRITE_INACTIVE() gpio_write_pin_high(HAPTIC_ENABLE_STATUS_LED)
|
|
#else
|
|
# define HAPTIC_ENABLE_STATUS_LED_WRITE_ACTIVE() gpio_write_pin_high(HAPTIC_ENABLE_STATUS_LED)
|
|
# define HAPTIC_ENABLE_STATUS_LED_WRITE_INACTIVE() gpio_write_pin_low(HAPTIC_ENABLE_STATUS_LED)
|
|
#endif
|
|
|
|
#ifndef HAPTIC_OFF_IN_LOW_POWER
|
|
# define HAPTIC_OFF_IN_LOW_POWER 0
|
|
#endif
|