mirror of
https://github.com/firewalkwithm3/qmk_firmware.git
synced 2024-11-23 03:50:28 +08:00
2e0498080f
Affects: - `keebio/bamfk4` - `keebio/bdn9/rev1` - `keebio/bdn9/rev2` - `keebio/bfo9000` - `keebio/bigswitchseat` - `keebio/choconum` - `keebio/dilly` - `keebio/dsp40/rev1` - `keebio/ergodicity` - `keebio/foldkb/rev1` - `keebio/fourier` - `keebio/iris/rev1` - `keebio/iris/rev1_led` - `keebio/iris/rev2` - `keebio/iris/rev3` - `keebio/iris/rev4` - `keebio/kbo5000/rev1` - `keebio/levinson/rev1` - `keebio/levinson/rev2` - `keebio/levinson/rev3` - `keebio/nyquist/rev1` - `keebio/nyquist/rev2` - `keebio/nyquist/rev3` - `keebio/quefrency/rev1` - `keebio/quefrency/rev4` - `keebio/quefrency/rev5` - `keebio/rorschach/rev1` - `keebio/sinc/rev1` - `keebio/sinc/rev2` - `keebio/tragicforce68` - `keebio/tukey` - `keebio/viterbi/rev1` - `keebio/viterbi/rev2` - `keebio/wavelet` - `keebio/wtf60` - `keebsforall/coarse60` - `keebsforall/freebirdnp/lite` - `keebsforall/freebirdnp/pro` - `keebsforall/freebirdtkl` - `keebwerk/nano_slider` - `keebzdotnet/fme` - `keebzdotnet/wazowski` - `keyboardio/atreus` - `keycapsss/kimiko/rev1` - `keycapsss/o4l_5x12` - `keygem/kg60ansi` - `keygem/kg65rgbv2` - `keyhive/absinthe` - `keyhive/ergosaurus` - `keyhive/lattice60` - `keyhive/maypad` - `keyhive/navi10/rev0` - `keyhive/navi10/rev2` - `keyhive/navi10/rev3` - `keyhive/opus` - `keyhive/southpole` - `keyhive/ut472` - `keyprez/bison` - `keyprez/corgi` - `keyprez/rhino` - `keyprez/unicorn` - `keysofkings/twokey` - `keystonecaps/gameroyadvance` |
||
---|---|---|
.. | ||
keymaps | ||
keyboard.json | ||
readme.md |
Big Switch Seat
PCB for the Big Switch.
- Keyboard Maintainer: Keebio
- Hardware Supported: Big Switch Seat PCB
- Hardware Availability: Robot Candy Company
Make example for this keyboard (after setting up your build environment):
make keebio/bigswitchseat:default
Flashing example for this keyboard:
make keebio/bigswitchseat:default:flash
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Bootloader
Enter the bootloader in 3 ways:
- Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
- Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
- Keycode in layout: Press the key mapped to
QK_BOOT
if it is available