mirror of
https://github.com/firewalkwithm3/qmk_firmware.git
synced 2024-11-22 19:40:29 +08:00
9e4037465a
* do the basic port for the WM1 * with much help from tzarc, get the addresses correct * make the keymap more closely mirror what the board has * Add QMK Configurator support * update the readme * get indicator leds working * enable RGB underglow * fix up rgb underglow * add notes regarding existence of backlight * Update keyboards/wolfmarkclub/wm1/readme.md * Update keyboards/wolfmarkclub/wm1/rules.mk * Update keyboards/wolfmarkclub/wm1/rules.mk * Update keyboards/wolfmarkclub/wm1/rules.mk * Update keyboards/wolfmarkclub/wm1/rules.mk * Update keyboards/wolfmarkclub/wm1/config.h * Update keyboards/wolfmarkclub/wm1/ld/wm1_f103.ld * Update keyboards/wolfmarkclub/wm1/bootloader_defs.h * Update keyboards/wolfmarkclub/wm1/config.h * Update keyboards/wolfmarkclub/wm1/rules.mk * Update keyboards/wolfmarkclub/wm1/wm1.c * Update keyboards/wolfmarkclub/wm1/wm1.c * Update keyboards/wolfmarkclub/wm1/rules.mk * Update keyboards/wolfmarkclub/wm1/rules.mk * Update keyboards/wolfmarkclub/wm1/readme.md * Update keyboards/wolfmarkclub/wm1/rules.mk * Update keyboards/wolfmarkclub/wm1/rules.mk * Update keyboards/wolfmarkclub/wm1/rules.mk * Update keyboards/wolfmarkclub/wm1/rules.mk * update readme
210 lines
7.3 KiB
C
210 lines
7.3 KiB
C
/*
|
|
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
|
|
|
|
Licensed under the Apache License, Version 2.0 (the "License");
|
|
you may not use this file except in compliance with the License.
|
|
You may obtain a copy of the License at
|
|
|
|
http://www.apache.org/licenses/LICENSE-2.0
|
|
|
|
Unless required by applicable law or agreed to in writing, software
|
|
distributed under the License is distributed on an "AS IS" BASIS,
|
|
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
See the License for the specific language governing permissions and
|
|
limitations under the License.
|
|
*/
|
|
|
|
#ifndef _MCUCONF_H_
|
|
#define _MCUCONF_H_
|
|
|
|
#define STM32F103_MCUCONF
|
|
|
|
/*
|
|
* STM32F103 drivers configuration.
|
|
* The following settings override the default settings present in
|
|
* the various device driver implementation headers.
|
|
* Note that the settings for each driver only have effect if the whole
|
|
* driver is enabled in halconf.h.
|
|
*
|
|
* IRQ priorities:
|
|
* 15...0 Lowest...Highest.
|
|
*
|
|
* DMA priorities:
|
|
* 0...3 Lowest...Highest.
|
|
*/
|
|
|
|
/*
|
|
* HAL driver system settings.
|
|
*/
|
|
#define STM32_NO_INIT FALSE
|
|
#define STM32_HSI_ENABLED TRUE
|
|
#define STM32_LSI_ENABLED FALSE
|
|
#define STM32_HSE_ENABLED TRUE
|
|
#define STM32_LSE_ENABLED FALSE
|
|
#define STM32_SW STM32_SW_PLL
|
|
#define STM32_PLLSRC STM32_PLLSRC_HSE
|
|
#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1
|
|
#define STM32_PLLMUL_VALUE 9
|
|
#define STM32_HPRE STM32_HPRE_DIV1
|
|
#define STM32_PPRE1 STM32_PPRE1_DIV2
|
|
#define STM32_PPRE2 STM32_PPRE2_DIV2
|
|
#define STM32_ADCPRE STM32_ADCPRE_DIV4
|
|
#define STM32_USB_CLOCK_REQUIRED TRUE
|
|
#define STM32_USBPRE STM32_USBPRE_DIV1P5
|
|
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
|
|
#define STM32_RTCSEL STM32_RTCSEL_HSEDIV
|
|
#define STM32_PVD_ENABLE FALSE
|
|
#define STM32_PLS STM32_PLS_LEV0
|
|
|
|
/*
|
|
* ADC driver system settings.
|
|
*/
|
|
#define STM32_ADC_USE_ADC1 FALSE
|
|
#define STM32_ADC_ADC1_DMA_PRIORITY 2
|
|
#define STM32_ADC_ADC1_IRQ_PRIORITY 6
|
|
|
|
/*
|
|
* CAN driver system settings.
|
|
*/
|
|
#define STM32_CAN_USE_CAN1 FALSE
|
|
#define STM32_CAN_CAN1_IRQ_PRIORITY 11
|
|
|
|
/*
|
|
* EXT driver system settings.
|
|
*/
|
|
#define STM32_EXT_EXTI0_IRQ_PRIORITY 6
|
|
#define STM32_EXT_EXTI1_IRQ_PRIORITY 6
|
|
#define STM32_EXT_EXTI2_IRQ_PRIORITY 6
|
|
#define STM32_EXT_EXTI3_IRQ_PRIORITY 6
|
|
#define STM32_EXT_EXTI4_IRQ_PRIORITY 6
|
|
#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6
|
|
#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6
|
|
#define STM32_EXT_EXTI16_IRQ_PRIORITY 6
|
|
#define STM32_EXT_EXTI17_IRQ_PRIORITY 6
|
|
#define STM32_EXT_EXTI18_IRQ_PRIORITY 6
|
|
#define STM32_EXT_EXTI19_IRQ_PRIORITY 6
|
|
|
|
/*
|
|
* GPT driver system settings.
|
|
*/
|
|
#define STM32_GPT_USE_TIM1 FALSE
|
|
#define STM32_GPT_USE_TIM2 FALSE
|
|
#define STM32_GPT_USE_TIM3 FALSE
|
|
#define STM32_GPT_USE_TIM4 FALSE
|
|
#define STM32_GPT_USE_TIM5 FALSE
|
|
#define STM32_GPT_USE_TIM8 FALSE
|
|
#define STM32_GPT_TIM1_IRQ_PRIORITY 7
|
|
#define STM32_GPT_TIM2_IRQ_PRIORITY 7
|
|
#define STM32_GPT_TIM3_IRQ_PRIORITY 7
|
|
#define STM32_GPT_TIM4_IRQ_PRIORITY 7
|
|
#define STM32_GPT_TIM5_IRQ_PRIORITY 7
|
|
#define STM32_GPT_TIM8_IRQ_PRIORITY 7
|
|
|
|
/*
|
|
* I2C driver system settings.
|
|
*/
|
|
#define STM32_I2C_USE_I2C1 FALSE
|
|
#define STM32_I2C_USE_I2C2 FALSE
|
|
#define STM32_I2C_BUSY_TIMEOUT 50
|
|
#define STM32_I2C_I2C1_IRQ_PRIORITY 5
|
|
#define STM32_I2C_I2C2_IRQ_PRIORITY 5
|
|
#define STM32_I2C_I2C1_DMA_PRIORITY 3
|
|
#define STM32_I2C_I2C2_DMA_PRIORITY 3
|
|
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
|
|
|
|
/*
|
|
* ICU driver system settings.
|
|
*/
|
|
#define STM32_ICU_USE_TIM1 FALSE
|
|
#define STM32_ICU_USE_TIM2 FALSE
|
|
#define STM32_ICU_USE_TIM3 FALSE
|
|
#define STM32_ICU_USE_TIM4 FALSE
|
|
#define STM32_ICU_USE_TIM5 FALSE
|
|
#define STM32_ICU_USE_TIM8 FALSE
|
|
#define STM32_ICU_TIM1_IRQ_PRIORITY 7
|
|
#define STM32_ICU_TIM2_IRQ_PRIORITY 7
|
|
#define STM32_ICU_TIM3_IRQ_PRIORITY 7
|
|
#define STM32_ICU_TIM4_IRQ_PRIORITY 7
|
|
#define STM32_ICU_TIM5_IRQ_PRIORITY 7
|
|
#define STM32_ICU_TIM8_IRQ_PRIORITY 7
|
|
|
|
/*
|
|
* PWM driver system settings.
|
|
*/
|
|
#define STM32_PWM_USE_ADVANCED FALSE
|
|
#define STM32_PWM_USE_TIM1 FALSE
|
|
#define STM32_PWM_USE_TIM2 TRUE
|
|
#define STM32_PWM_USE_TIM3 FALSE
|
|
#define STM32_PWM_USE_TIM4 FALSE
|
|
#define STM32_PWM_USE_TIM5 FALSE
|
|
#define STM32_PWM_USE_TIM8 FALSE
|
|
#define STM32_PWM_TIM1_IRQ_PRIORITY 7
|
|
#define STM32_PWM_TIM2_IRQ_PRIORITY 7
|
|
#define STM32_PWM_TIM3_IRQ_PRIORITY 7
|
|
#define STM32_PWM_TIM4_IRQ_PRIORITY 7
|
|
#define STM32_PWM_TIM5_IRQ_PRIORITY 7
|
|
#define STM32_PWM_TIM8_IRQ_PRIORITY 7
|
|
|
|
/*
|
|
* RTC driver system settings.
|
|
*/
|
|
#define STM32_RTC_IRQ_PRIORITY 15
|
|
|
|
/*
|
|
* SERIAL driver system settings.
|
|
*/
|
|
#define STM32_SERIAL_USE_USART1 FALSE
|
|
#define STM32_SERIAL_USE_USART2 FALSE
|
|
#define STM32_SERIAL_USE_USART3 FALSE
|
|
#define STM32_SERIAL_USE_UART4 FALSE
|
|
#define STM32_SERIAL_USE_UART5 FALSE
|
|
#define STM32_SERIAL_USART1_PRIORITY 12
|
|
#define STM32_SERIAL_USART2_PRIORITY 12
|
|
#define STM32_SERIAL_USART3_PRIORITY 12
|
|
#define STM32_SERIAL_UART4_PRIORITY 12
|
|
#define STM32_SERIAL_UART5_PRIORITY 12
|
|
|
|
/*
|
|
* SPI driver system settings.
|
|
*/
|
|
#define STM32_SPI_USE_SPI1 FALSE
|
|
#define STM32_SPI_USE_SPI2 FALSE
|
|
#define STM32_SPI_USE_SPI3 FALSE
|
|
#define STM32_SPI_SPI1_DMA_PRIORITY 1
|
|
#define STM32_SPI_SPI2_DMA_PRIORITY 1
|
|
#define STM32_SPI_SPI3_DMA_PRIORITY 1
|
|
#define STM32_SPI_SPI1_IRQ_PRIORITY 10
|
|
#define STM32_SPI_SPI2_IRQ_PRIORITY 10
|
|
#define STM32_SPI_SPI3_IRQ_PRIORITY 10
|
|
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
|
|
|
|
/*
|
|
* ST driver system settings.
|
|
*/
|
|
#define STM32_ST_IRQ_PRIORITY 8
|
|
#define STM32_ST_USE_TIMER 2
|
|
|
|
/*
|
|
* UART driver system settings.
|
|
*/
|
|
#define STM32_UART_USE_USART1 FALSE
|
|
#define STM32_UART_USE_USART2 FALSE
|
|
#define STM32_UART_USE_USART3 FALSE
|
|
#define STM32_UART_USART1_IRQ_PRIORITY 12
|
|
#define STM32_UART_USART2_IRQ_PRIORITY 12
|
|
#define STM32_UART_USART3_IRQ_PRIORITY 12
|
|
#define STM32_UART_USART1_DMA_PRIORITY 0
|
|
#define STM32_UART_USART2_DMA_PRIORITY 0
|
|
#define STM32_UART_USART3_DMA_PRIORITY 0
|
|
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
|
|
|
|
/*
|
|
* USB driver system settings.
|
|
*/
|
|
#define STM32_USB_USE_USB1 TRUE
|
|
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
|
|
#define STM32_USB_USB1_HP_IRQ_PRIORITY 13
|
|
#define STM32_USB_USB1_LP_IRQ_PRIORITY 14
|
|
|
|
#endif /* _MCUCONF_H_ */
|