fern/qmk-firmware
1
0
Fork 0
mirror of https://github.com/firewalkwithm3/qmk_firmware.git synced 2024-11-22 11:30:30 +08:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
qmk-firmware/keyboards/melgeek/mach80
History
Ryan 65a04ead32
LED drivers: update keyboard LED configs (#23073) 
* IS31FL3733: update keyboard LED config

* IS31FL3736: update keyboard LED config

* IS31FL3737: update keyboard LED config

* IS31FL3741: update keyboard LED config

* IS31FL3743A: update keyboard LED config

* AW20216S: update keyboard LED config

* SNLED27351: update keyboard LED config
2024-02-25 21:29:37 +00:00
..
keymaps Remove legacy Grave Escape keycodes (#18787) 2022-10-20 18:04:11 -07:00
rev1 LED drivers: update keyboard LED configs (#23073) 2024-02-25 21:29:37 +00:00
rev2 LED drivers: update keyboard LED configs (#23073) 2024-02-25 21:29:37 +00:00
config.h LED drivers: add support for shutdown pin (#23058) 2024-02-15 07:11:50 +00:00
info.json Migrate RGB Matrix config to info.json - M (#22908) 2024-01-16 01:04:09 +00:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00

readme.md

MelGeek Mach80

Mach80

A hotswap 80% RGB Custom Mechanical keyboard.

  • Keyboard Maintainer: melgeek001365
  • Hardware Supported: Mach80 rev1 20210819
  • Hardware Availability: MelGeek

Make example for this keyboard (after setting up your build environment):

make melgeek/mach80/rev1:default

Enter the bootloader in 3 ways:

Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard * Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead * Keycode in layout: Press the key mapped to QK_BOOT if it is available *

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.