mirror of
https://github.com/firewalkwithm3/qmk_firmware.git
synced 2024-11-22 19:40:29 +08:00
a03aa301de
* disambiguate Bootmagic rules in keymaps
The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic.
This commit edits the files to specify that full Bootmagic is intended.
* remove BOOTMAGIC_ENABLE=full setting
* unify commented BOOTMAGIC_ENABLE rules in keyboards
Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no # Virtual DIP switch configuration;g' {} +
```
* remove commented Bootmagic rules from keymap/user level
Command:
```
find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} +
```
* update keyboard BOOTMAGIC_ENABLE rule formatting
Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later).
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
```
* update keyboards' BOOTMAGIC_ENABLE settings
Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' +
```
* update keymap/user BOOTMAGIC_ENABLE settings
Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.
Commands:
```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
```
* remove and replace inline comments in keyboards and keymap/user files
Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`.
Commands:
```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' +
```
* rename improperly named makefiles
Some files intended to be used as makefiles had improper names causing them to not be used as intended when building.
This commit corrects the filenames of the affected files.
* update renamed file with new rule formatting
* update QMK's template files
Updates QMK's `rules.mk` templates to use the new inline comment.
* update QMK Docs
- remove documentation of full Bootmagic
- update links to Bootmagic Lite doc
- add doc for Magic Keycodes
* rules.mk patch for coarse/ixora and coarse/vinta
733 lines
23 KiB
Makefile
733 lines
23 KiB
Makefile
# Copyright 2017 Fred Sundvik
|
|
#
|
|
# This program is free software: you can redistribute it and/or modify
|
|
# it under the terms of the GNU General Public License as published by
|
|
# the Free Software Foundation, either version 2 of the License, or
|
|
# (at your option) any later version.
|
|
#
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
# GNU General Public License for more details.
|
|
#
|
|
# You should have received a copy of the GNU General Public License
|
|
# along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
SERIAL_PATH := $(QUANTUM_PATH)/serial_link
|
|
|
|
QUANTUM_SRC += \
|
|
$(QUANTUM_DIR)/quantum.c \
|
|
$(QUANTUM_DIR)/send_string.c \
|
|
$(QUANTUM_DIR)/bitwise.c \
|
|
$(QUANTUM_DIR)/led.c \
|
|
$(QUANTUM_DIR)/keymap_common.c \
|
|
$(QUANTUM_DIR)/keycode_config.c \
|
|
$(QUANTUM_DIR)/logging/debug.c \
|
|
$(QUANTUM_DIR)/logging/sendchar.c \
|
|
|
|
VPATH += $(QUANTUM_DIR)/logging
|
|
# Fall back to lib/printf if there is no platform provided print
|
|
ifeq ("$(wildcard $(TMK_PATH)/common/$(PLATFORM_KEY)/printf.mk)","")
|
|
include $(QUANTUM_PATH)/logging/print.mk
|
|
endif
|
|
|
|
ifeq ($(strip $(DEBUG_MATRIX_SCAN_RATE_ENABLE)), yes)
|
|
OPT_DEFS += -DDEBUG_MATRIX_SCAN_RATE
|
|
CONSOLE_ENABLE = yes
|
|
else ifeq ($(strip $(DEBUG_MATRIX_SCAN_RATE_ENABLE)), api)
|
|
OPT_DEFS += -DDEBUG_MATRIX_SCAN_RATE
|
|
endif
|
|
|
|
ifeq ($(strip $(API_SYSEX_ENABLE)), yes)
|
|
OPT_DEFS += -DAPI_SYSEX_ENABLE
|
|
OPT_DEFS += -DAPI_ENABLE
|
|
MIDI_ENABLE=yes
|
|
SRC += $(QUANTUM_DIR)/api/api_sysex.c
|
|
SRC += $(QUANTUM_DIR)/api.c
|
|
endif
|
|
|
|
ifeq ($(strip $(COMMAND_ENABLE)), yes)
|
|
SRC += $(QUANTUM_DIR)/command.c
|
|
OPT_DEFS += -DCOMMAND_ENABLE
|
|
endif
|
|
|
|
AUDIO_ENABLE ?= no
|
|
ifeq ($(strip $(AUDIO_ENABLE)), yes)
|
|
ifeq ($(PLATFORM),CHIBIOS)
|
|
AUDIO_DRIVER ?= dac_basic
|
|
ifeq ($(strip $(AUDIO_DRIVER)), dac_basic)
|
|
OPT_DEFS += -DAUDIO_DRIVER_DAC
|
|
else ifeq ($(strip $(AUDIO_DRIVER)), dac_additive)
|
|
OPT_DEFS += -DAUDIO_DRIVER_DAC
|
|
## stm32f2 and above have a usable DAC unit, f1 do not, and need to use pwm instead
|
|
else ifeq ($(strip $(AUDIO_DRIVER)), pwm_software)
|
|
OPT_DEFS += -DAUDIO_DRIVER_PWM
|
|
else ifeq ($(strip $(AUDIO_DRIVER)), pwm_hardware)
|
|
OPT_DEFS += -DAUDIO_DRIVER_PWM
|
|
endif
|
|
else
|
|
# fallback for all other platforms is pwm
|
|
AUDIO_DRIVER ?= pwm_hardware
|
|
OPT_DEFS += -DAUDIO_DRIVER_PWM
|
|
endif
|
|
OPT_DEFS += -DAUDIO_ENABLE
|
|
MUSIC_ENABLE = yes
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_audio.c
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_clicky.c
|
|
SRC += $(QUANTUM_DIR)/audio/audio.c ## common audio code, hardware agnostic
|
|
SRC += $(QUANTUM_DIR)/audio/driver_$(PLATFORM_KEY)_$(strip $(AUDIO_DRIVER)).c
|
|
SRC += $(QUANTUM_DIR)/audio/voices.c
|
|
SRC += $(QUANTUM_DIR)/audio/luts.c
|
|
endif
|
|
|
|
ifeq ($(strip $(SEQUENCER_ENABLE)), yes)
|
|
OPT_DEFS += -DSEQUENCER_ENABLE
|
|
MUSIC_ENABLE = yes
|
|
SRC += $(QUANTUM_DIR)/sequencer/sequencer.c
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_sequencer.c
|
|
endif
|
|
|
|
ifeq ($(strip $(MIDI_ENABLE)), yes)
|
|
OPT_DEFS += -DMIDI_ENABLE
|
|
MUSIC_ENABLE = yes
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_midi.c
|
|
endif
|
|
|
|
MUSIC_ENABLE ?= no
|
|
ifeq ($(MUSIC_ENABLE), yes)
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_music.c
|
|
endif
|
|
|
|
ifeq ($(strip $(STENO_ENABLE)), yes)
|
|
OPT_DEFS += -DSTENO_ENABLE
|
|
VIRTSER_ENABLE ?= yes
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_steno.c
|
|
endif
|
|
|
|
ifeq ($(strip $(VIRTSER_ENABLE)), yes)
|
|
OPT_DEFS += -DVIRTSER_ENABLE
|
|
endif
|
|
|
|
ifeq ($(strip $(MOUSEKEY_ENABLE)), yes)
|
|
OPT_DEFS += -DMOUSEKEY_ENABLE
|
|
OPT_DEFS += -DMOUSE_ENABLE
|
|
SRC += $(QUANTUM_DIR)/mousekey.c
|
|
endif
|
|
|
|
ifeq ($(strip $(POINTING_DEVICE_ENABLE)), yes)
|
|
OPT_DEFS += -DPOINTING_DEVICE_ENABLE
|
|
OPT_DEFS += -DMOUSE_ENABLE
|
|
SRC += $(QUANTUM_DIR)/pointing_device.c
|
|
endif
|
|
|
|
VALID_EEPROM_DRIVER_TYPES := vendor custom transient i2c spi
|
|
EEPROM_DRIVER ?= vendor
|
|
ifeq ($(filter $(EEPROM_DRIVER),$(VALID_EEPROM_DRIVER_TYPES)),)
|
|
$(error EEPROM_DRIVER="$(EEPROM_DRIVER)" is not a valid EEPROM driver)
|
|
else
|
|
OPT_DEFS += -DEEPROM_ENABLE
|
|
ifeq ($(strip $(EEPROM_DRIVER)), custom)
|
|
OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_CUSTOM
|
|
COMMON_VPATH += $(DRIVER_PATH)/eeprom
|
|
SRC += eeprom_driver.c
|
|
else ifeq ($(strip $(EEPROM_DRIVER)), i2c)
|
|
OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_I2C
|
|
COMMON_VPATH += $(DRIVER_PATH)/eeprom
|
|
QUANTUM_LIB_SRC += i2c_master.c
|
|
SRC += eeprom_driver.c eeprom_i2c.c
|
|
else ifeq ($(strip $(EEPROM_DRIVER)), spi)
|
|
OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_SPI
|
|
COMMON_VPATH += $(DRIVER_PATH)/eeprom
|
|
QUANTUM_LIB_SRC += spi_master.c
|
|
SRC += eeprom_driver.c eeprom_spi.c
|
|
else ifeq ($(strip $(EEPROM_DRIVER)), transient)
|
|
OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_TRANSIENT
|
|
COMMON_VPATH += $(DRIVER_PATH)/eeprom
|
|
SRC += eeprom_driver.c eeprom_transient.c
|
|
else ifeq ($(strip $(EEPROM_DRIVER)), vendor)
|
|
OPT_DEFS += -DEEPROM_VENDOR
|
|
ifeq ($(PLATFORM),AVR)
|
|
# Automatically provided by avr-libc, nothing required
|
|
else ifeq ($(PLATFORM),CHIBIOS)
|
|
ifeq ($(MCU_SERIES), STM32F3xx)
|
|
SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c
|
|
SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c
|
|
OPT_DEFS += -DEEPROM_EMU_STM32F303xC
|
|
OPT_DEFS += -DSTM32_EEPROM_ENABLE
|
|
else ifeq ($(MCU_SERIES), STM32F1xx)
|
|
SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c
|
|
SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c
|
|
OPT_DEFS += -DEEPROM_EMU_STM32F103xB
|
|
OPT_DEFS += -DSTM32_EEPROM_ENABLE
|
|
else ifeq ($(MCU_SERIES)_$(MCU_LDSCRIPT), STM32F0xx_STM32F072xB)
|
|
SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c
|
|
SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c
|
|
OPT_DEFS += -DEEPROM_EMU_STM32F072xB
|
|
OPT_DEFS += -DSTM32_EEPROM_ENABLE
|
|
else ifeq ($(MCU_SERIES)_$(MCU_LDSCRIPT), STM32F0xx_STM32F042x6)
|
|
|
|
# Stack sizes: Since this chip has limited RAM capacity, the stack area needs to be reduced.
|
|
# This ensures that the EEPROM page buffer fits into RAM
|
|
USE_PROCESS_STACKSIZE = 0x600
|
|
USE_EXCEPTIONS_STACKSIZE = 0x300
|
|
|
|
SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c
|
|
SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c
|
|
OPT_DEFS += -DEEPROM_EMU_STM32F042x6
|
|
OPT_DEFS += -DSTM32_EEPROM_ENABLE
|
|
else ifneq ($(filter $(MCU_SERIES),STM32L0xx STM32L1xx),)
|
|
OPT_DEFS += -DEEPROM_DRIVER
|
|
COMMON_VPATH += $(DRIVER_PATH)/eeprom
|
|
SRC += eeprom_driver.c eeprom_stm32_L0_L1.c
|
|
else
|
|
# This will effectively work the same as "transient" if not supported by the chip
|
|
SRC += $(PLATFORM_COMMON_DIR)/eeprom_teensy.c
|
|
endif
|
|
else ifeq ($(PLATFORM),ARM_ATSAM)
|
|
SRC += $(PLATFORM_COMMON_DIR)/eeprom.c
|
|
else ifeq ($(PLATFORM),TEST)
|
|
SRC += $(PLATFORM_COMMON_DIR)/eeprom.c
|
|
endif
|
|
endif
|
|
endif
|
|
|
|
RGBLIGHT_ENABLE ?= no
|
|
VALID_RGBLIGHT_TYPES := WS2812 APA102 custom
|
|
|
|
ifeq ($(strip $(RGBLIGHT_CUSTOM_DRIVER)), yes)
|
|
RGBLIGHT_DRIVER ?= custom
|
|
endif
|
|
|
|
ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
|
|
RGBLIGHT_DRIVER ?= WS2812
|
|
|
|
ifeq ($(filter $(RGBLIGHT_DRIVER),$(VALID_RGBLIGHT_TYPES)),)
|
|
$(error RGBLIGHT_DRIVER="$(RGBLIGHT_DRIVER)" is not a valid RGB type)
|
|
else
|
|
COMMON_VPATH += $(QUANTUM_DIR)/rgblight
|
|
POST_CONFIG_H += $(QUANTUM_DIR)/rgblight/rgblight_post_config.h
|
|
OPT_DEFS += -DRGBLIGHT_ENABLE
|
|
SRC += $(QUANTUM_DIR)/color.c
|
|
SRC += $(QUANTUM_DIR)/rgblight/rgblight.c
|
|
CIE1931_CURVE := yes
|
|
RGB_KEYCODES_ENABLE := yes
|
|
endif
|
|
|
|
ifeq ($(strip $(RGBLIGHT_DRIVER)), WS2812)
|
|
WS2812_DRIVER_REQUIRED := yes
|
|
endif
|
|
|
|
ifeq ($(strip $(RGBLIGHT_DRIVER)), APA102)
|
|
APA102_DRIVER_REQUIRED := yes
|
|
endif
|
|
|
|
ifeq ($(strip $(RGBLIGHT_DRIVER)), custom)
|
|
OPT_DEFS += -DRGBLIGHT_CUSTOM_DRIVER
|
|
endif
|
|
endif
|
|
|
|
LED_MATRIX_ENABLE ?= no
|
|
VALID_LED_MATRIX_TYPES := IS31FL3731 custom
|
|
# TODO: IS31FL3733 IS31FL3737 IS31FL3741
|
|
|
|
ifeq ($(strip $(LED_MATRIX_ENABLE)), yes)
|
|
ifeq ($(filter $(LED_MATRIX_DRIVER),$(VALID_LED_MATRIX_TYPES)),)
|
|
$(error "$(LED_MATRIX_DRIVER)" is not a valid matrix type)
|
|
endif
|
|
OPT_DEFS += -DLED_MATRIX_ENABLE
|
|
ifneq (,$(filter $(MCU), atmega16u2 atmega32u2 at90usb162))
|
|
# ATmegaxxU2 does not have hardware MUL instruction - lib8tion must be told to use software multiplication routines
|
|
OPT_DEFS += -DLIB8_ATTINY
|
|
endif
|
|
COMMON_VPATH += $(QUANTUM_DIR)/led_matrix
|
|
COMMON_VPATH += $(QUANTUM_DIR)/led_matrix/animations
|
|
COMMON_VPATH += $(QUANTUM_DIR)/led_matrix/animations/runners
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_backlight.c
|
|
SRC += $(QUANTUM_DIR)/led_matrix/led_matrix.c
|
|
SRC += $(QUANTUM_DIR)/led_matrix/led_matrix_drivers.c
|
|
SRC += $(LIB_PATH)/lib8tion/lib8tion.c
|
|
CIE1931_CURVE := yes
|
|
|
|
ifeq ($(strip $(LED_MATRIX_DRIVER)), IS31FL3731)
|
|
OPT_DEFS += -DIS31FL3731 -DSTM32_I2C -DHAL_USE_I2C=TRUE
|
|
COMMON_VPATH += $(DRIVER_PATH)/led/issi
|
|
SRC += is31fl3731-simple.c
|
|
QUANTUM_LIB_SRC += i2c_master.c
|
|
endif
|
|
endif
|
|
|
|
RGB_MATRIX_ENABLE ?= no
|
|
VALID_RGB_MATRIX_TYPES := AW20216 IS31FL3731 IS31FL3733 IS31FL3737 IS31FL3741 WS2812 custom
|
|
|
|
ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes)
|
|
ifeq ($(filter $(RGB_MATRIX_DRIVER),$(VALID_RGB_MATRIX_TYPES)),)
|
|
$(error "$(RGB_MATRIX_DRIVER)" is not a valid matrix type)
|
|
endif
|
|
OPT_DEFS += -DRGB_MATRIX_ENABLE
|
|
ifneq (,$(filter $(MCU), atmega16u2 atmega32u2 at90usb162))
|
|
# ATmegaxxU2 does not have hardware MUL instruction - lib8tion must be told to use software multiplication routines
|
|
OPT_DEFS += -DLIB8_ATTINY
|
|
endif
|
|
COMMON_VPATH += $(QUANTUM_DIR)/rgb_matrix
|
|
COMMON_VPATH += $(QUANTUM_DIR)/rgb_matrix/animations
|
|
COMMON_VPATH += $(QUANTUM_DIR)/rgb_matrix/animations/runners
|
|
SRC += $(QUANTUM_DIR)/color.c
|
|
SRC += $(QUANTUM_DIR)/rgb_matrix/rgb_matrix.c
|
|
SRC += $(QUANTUM_DIR)/rgb_matrix/rgb_matrix_drivers.c
|
|
SRC += $(LIB_PATH)/lib8tion/lib8tion.c
|
|
CIE1931_CURVE := yes
|
|
RGB_KEYCODES_ENABLE := yes
|
|
|
|
ifeq ($(strip $(RGB_MATRIX_DRIVER)), AW20216)
|
|
OPT_DEFS += -DAW20216 -DSTM32_SPI -DHAL_USE_SPI=TRUE
|
|
COMMON_VPATH += $(DRIVER_PATH)/led
|
|
SRC += aw20216.c
|
|
QUANTUM_LIB_SRC += spi_master.c
|
|
endif
|
|
|
|
ifeq ($(strip $(RGB_MATRIX_DRIVER)), IS31FL3731)
|
|
OPT_DEFS += -DIS31FL3731 -DSTM32_I2C -DHAL_USE_I2C=TRUE
|
|
COMMON_VPATH += $(DRIVER_PATH)/led/issi
|
|
SRC += is31fl3731.c
|
|
QUANTUM_LIB_SRC += i2c_master.c
|
|
endif
|
|
|
|
ifeq ($(strip $(RGB_MATRIX_DRIVER)), IS31FL3733)
|
|
OPT_DEFS += -DIS31FL3733 -DSTM32_I2C -DHAL_USE_I2C=TRUE
|
|
COMMON_VPATH += $(DRIVER_PATH)/led/issi
|
|
SRC += is31fl3733.c
|
|
QUANTUM_LIB_SRC += i2c_master.c
|
|
endif
|
|
|
|
ifeq ($(strip $(RGB_MATRIX_DRIVER)), IS31FL3737)
|
|
OPT_DEFS += -DIS31FL3737 -DSTM32_I2C -DHAL_USE_I2C=TRUE
|
|
COMMON_VPATH += $(DRIVER_PATH)/led/issi
|
|
SRC += is31fl3737.c
|
|
QUANTUM_LIB_SRC += i2c_master.c
|
|
endif
|
|
|
|
ifeq ($(strip $(RGB_MATRIX_DRIVER)), IS31FL3741)
|
|
OPT_DEFS += -DIS31FL3741 -DSTM32_I2C -DHAL_USE_I2C=TRUE
|
|
COMMON_VPATH += $(DRIVER_PATH)/led/issi
|
|
SRC += is31fl3741.c
|
|
QUANTUM_LIB_SRC += i2c_master.c
|
|
endif
|
|
|
|
ifeq ($(strip $(RGB_MATRIX_DRIVER)), WS2812)
|
|
OPT_DEFS += -DWS2812
|
|
WS2812_DRIVER_REQUIRED := yes
|
|
endif
|
|
|
|
ifeq ($(strip $(RGB_MATRIX_DRIVER)), APA102)
|
|
OPT_DEFS += -DAPA102
|
|
APA102_DRIVER_REQUIRED := yes
|
|
endif
|
|
|
|
ifeq ($(strip $(RGB_MATRIX_CUSTOM_KB)), yes)
|
|
OPT_DEFS += -DRGB_MATRIX_CUSTOM_KB
|
|
endif
|
|
|
|
ifeq ($(strip $(RGB_MATRIX_CUSTOM_USER)), yes)
|
|
OPT_DEFS += -DRGB_MATRIX_CUSTOM_USER
|
|
endif
|
|
endif
|
|
|
|
ifeq ($(strip $(RGB_KEYCODES_ENABLE)), yes)
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_rgb.c
|
|
endif
|
|
|
|
ifeq ($(strip $(PRINTING_ENABLE)), yes)
|
|
OPT_DEFS += -DPRINTING_ENABLE
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_printer.c
|
|
SRC += $(TMK_DIR)/protocol/serial_uart.c
|
|
endif
|
|
|
|
ifeq ($(strip $(SERIAL_LINK_ENABLE)), yes)
|
|
SERIAL_SRC := $(wildcard $(SERIAL_PATH)/protocol/*.c)
|
|
SERIAL_SRC += $(wildcard $(SERIAL_PATH)/system/*.c)
|
|
SERIAL_DEFS += -DSERIAL_LINK_ENABLE
|
|
COMMON_VPATH += $(SERIAL_PATH)
|
|
|
|
SRC += $(patsubst $(QUANTUM_PATH)/%,%,$(SERIAL_SRC))
|
|
OPT_DEFS += $(SERIAL_DEFS)
|
|
VAPTH += $(SERIAL_PATH)
|
|
endif
|
|
|
|
VARIABLE_TRACE ?= no
|
|
ifneq ($(strip $(VARIABLE_TRACE)),no)
|
|
SRC += $(QUANTUM_DIR)/variable_trace.c
|
|
OPT_DEFS += -DNUM_TRACED_VARIABLES=$(strip $(VARIABLE_TRACE))
|
|
ifneq ($(strip $(MAX_VARIABLE_TRACE_SIZE)),)
|
|
OPT_DEFS += -DMAX_VARIABLE_TRACE_SIZE=$(strip $(MAX_VARIABLE_TRACE_SIZE))
|
|
endif
|
|
endif
|
|
|
|
ifeq ($(strip $(LCD_ENABLE)), yes)
|
|
CIE1931_CURVE := yes
|
|
endif
|
|
|
|
VALID_BACKLIGHT_TYPES := pwm timer software custom
|
|
|
|
BACKLIGHT_ENABLE ?= no
|
|
ifeq ($(strip $(CONVERT_TO_PROTON_C)), yes)
|
|
BACKLIGHT_DRIVER ?= software
|
|
else
|
|
BACKLIGHT_DRIVER ?= pwm
|
|
endif
|
|
ifeq ($(strip $(BACKLIGHT_ENABLE)), yes)
|
|
ifeq ($(filter $(BACKLIGHT_DRIVER),$(VALID_BACKLIGHT_TYPES)),)
|
|
$(error BACKLIGHT_DRIVER="$(BACKLIGHT_DRIVER)" is not a valid backlight type)
|
|
endif
|
|
|
|
COMMON_VPATH += $(QUANTUM_DIR)/backlight
|
|
SRC += $(QUANTUM_DIR)/backlight/backlight.c
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_backlight.c
|
|
OPT_DEFS += -DBACKLIGHT_ENABLE
|
|
|
|
ifeq ($(strip $(BACKLIGHT_DRIVER)), custom)
|
|
OPT_DEFS += -DBACKLIGHT_CUSTOM_DRIVER
|
|
else
|
|
SRC += $(QUANTUM_DIR)/backlight/backlight_driver_common.c
|
|
ifeq ($(strip $(BACKLIGHT_DRIVER)), pwm)
|
|
SRC += $(QUANTUM_DIR)/backlight/backlight_$(PLATFORM_KEY).c
|
|
else
|
|
SRC += $(QUANTUM_DIR)/backlight/backlight_$(strip $(BACKLIGHT_DRIVER)).c
|
|
endif
|
|
endif
|
|
endif
|
|
|
|
VALID_WS2812_DRIVER_TYPES := bitbang pwm spi i2c
|
|
|
|
WS2812_DRIVER ?= bitbang
|
|
ifeq ($(strip $(WS2812_DRIVER_REQUIRED)), yes)
|
|
ifeq ($(filter $(WS2812_DRIVER),$(VALID_WS2812_DRIVER_TYPES)),)
|
|
$(error WS2812_DRIVER="$(WS2812_DRIVER)" is not a valid WS2812 driver)
|
|
endif
|
|
|
|
OPT_DEFS += -DWS2812_DRIVER_$(strip $(shell echo $(WS2812_DRIVER) | tr '[:lower:]' '[:upper:]'))
|
|
|
|
ifeq ($(strip $(WS2812_DRIVER)), bitbang)
|
|
SRC += ws2812.c
|
|
else
|
|
SRC += ws2812_$(strip $(WS2812_DRIVER)).c
|
|
|
|
ifeq ($(strip $(PLATFORM)), CHIBIOS)
|
|
ifeq ($(strip $(WS2812_DRIVER)), pwm)
|
|
OPT_DEFS += -DSTM32_DMA_REQUIRED=TRUE
|
|
endif
|
|
endif
|
|
endif
|
|
|
|
# add extra deps
|
|
ifeq ($(strip $(WS2812_DRIVER)), i2c)
|
|
QUANTUM_LIB_SRC += i2c_master.c
|
|
endif
|
|
endif
|
|
|
|
ifeq ($(strip $(APA102_DRIVER_REQUIRED)), yes)
|
|
COMMON_VPATH += $(DRIVER_PATH)/led
|
|
SRC += apa102.c
|
|
endif
|
|
|
|
ifeq ($(strip $(VISUALIZER_ENABLE)), yes)
|
|
CIE1931_CURVE := yes
|
|
endif
|
|
|
|
ifeq ($(strip $(CIE1931_CURVE)), yes)
|
|
OPT_DEFS += -DUSE_CIE1931_CURVE
|
|
LED_TABLES := yes
|
|
endif
|
|
|
|
ifeq ($(strip $(LED_TABLES)), yes)
|
|
SRC += $(QUANTUM_DIR)/led_tables.c
|
|
endif
|
|
|
|
ifeq ($(strip $(TERMINAL_ENABLE)), yes)
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_terminal.c
|
|
OPT_DEFS += -DTERMINAL_ENABLE
|
|
OPT_DEFS += -DUSER_PRINT
|
|
endif
|
|
|
|
ifeq ($(strip $(WPM_ENABLE)), yes)
|
|
SRC += $(QUANTUM_DIR)/wpm.c
|
|
OPT_DEFS += -DWPM_ENABLE
|
|
endif
|
|
|
|
ifeq ($(strip $(ENCODER_ENABLE)), yes)
|
|
SRC += $(QUANTUM_DIR)/encoder.c
|
|
OPT_DEFS += -DENCODER_ENABLE
|
|
endif
|
|
|
|
ifeq ($(strip $(VELOCIKEY_ENABLE)), yes)
|
|
OPT_DEFS += -DVELOCIKEY_ENABLE
|
|
SRC += $(QUANTUM_DIR)/velocikey.c
|
|
endif
|
|
|
|
ifeq ($(strip $(VIA_ENABLE)), yes)
|
|
DYNAMIC_KEYMAP_ENABLE := yes
|
|
RAW_ENABLE := yes
|
|
BOOTMAGIC_ENABLE := lite
|
|
SRC += $(QUANTUM_DIR)/via.c
|
|
OPT_DEFS += -DVIA_ENABLE
|
|
endif
|
|
|
|
ifeq ($(strip $(DYNAMIC_KEYMAP_ENABLE)), yes)
|
|
OPT_DEFS += -DDYNAMIC_KEYMAP_ENABLE
|
|
SRC += $(QUANTUM_DIR)/dynamic_keymap.c
|
|
endif
|
|
|
|
ifeq ($(strip $(DIP_SWITCH_ENABLE)), yes)
|
|
OPT_DEFS += -DDIP_SWITCH_ENABLE
|
|
SRC += $(QUANTUM_DIR)/dip_switch.c
|
|
endif
|
|
|
|
VALID_MAGIC_TYPES := yes lite
|
|
BOOTMAGIC_ENABLE ?= no
|
|
ifneq ($(strip $(BOOTMAGIC_ENABLE)), no)
|
|
ifeq ($(filter $(BOOTMAGIC_ENABLE),$(VALID_MAGIC_TYPES)),)
|
|
$(error BOOTMAGIC_ENABLE="$(BOOTMAGIC_ENABLE)" is not a valid type of magic)
|
|
endif
|
|
ifneq ($(strip $(BOOTMAGIC_ENABLE)), no)
|
|
OPT_DEFS += -DBOOTMAGIC_LITE
|
|
QUANTUM_SRC += $(QUANTUM_DIR)/bootmagic/bootmagic_lite.c
|
|
endif
|
|
endif
|
|
COMMON_VPATH += $(QUANTUM_DIR)/bootmagic
|
|
QUANTUM_SRC += $(QUANTUM_DIR)/bootmagic/magic.c
|
|
|
|
VALID_CUSTOM_MATRIX_TYPES:= yes lite no
|
|
|
|
CUSTOM_MATRIX ?= no
|
|
|
|
ifneq ($(strip $(CUSTOM_MATRIX)), yes)
|
|
ifeq ($(filter $(CUSTOM_MATRIX),$(VALID_CUSTOM_MATRIX_TYPES)),)
|
|
$(error CUSTOM_MATRIX="$(CUSTOM_MATRIX)" is not a valid custom matrix type)
|
|
endif
|
|
|
|
# Include common stuff for all non custom matrix users
|
|
QUANTUM_SRC += $(QUANTUM_DIR)/matrix_common.c
|
|
|
|
# if 'lite' then skip the actual matrix implementation
|
|
ifneq ($(strip $(CUSTOM_MATRIX)), lite)
|
|
# Include the standard or split matrix code if needed
|
|
QUANTUM_SRC += $(QUANTUM_DIR)/matrix.c
|
|
endif
|
|
endif
|
|
|
|
# Support for translating old names to new names:
|
|
ifeq ($(strip $(DEBOUNCE_TYPE)),sym_g)
|
|
DEBOUNCE_TYPE:=sym_defer_g
|
|
else ifeq ($(strip $(DEBOUNCE_TYPE)),eager_pk)
|
|
DEBOUNCE_TYPE:=sym_eager_pk
|
|
else ifeq ($(strip $(DEBOUNCE_TYPE)),sym_pk)
|
|
DEBOUNCE_TYPE:=sym_defer_pk
|
|
else ifeq ($(strip $(DEBOUNCE_TYPE)),eager_pr)
|
|
DEBOUNCE_TYPE:=sym_eager_pr
|
|
endif
|
|
|
|
DEBOUNCE_DIR:= $(QUANTUM_DIR)/debounce
|
|
# Debounce Modules. Set DEBOUNCE_TYPE=custom if including one manually.
|
|
DEBOUNCE_TYPE?= sym_defer_g
|
|
ifneq ($(strip $(DEBOUNCE_TYPE)), custom)
|
|
QUANTUM_SRC += $(DEBOUNCE_DIR)/$(strip $(DEBOUNCE_TYPE)).c
|
|
endif
|
|
|
|
ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
|
|
POST_CONFIG_H += $(QUANTUM_DIR)/split_common/post_config.h
|
|
OPT_DEFS += -DSPLIT_KEYBOARD
|
|
CRC_ENABLE := yes
|
|
|
|
# Include files used by all split keyboards
|
|
QUANTUM_SRC += $(QUANTUM_DIR)/split_common/split_util.c
|
|
|
|
# Determine which (if any) transport files are required
|
|
ifneq ($(strip $(SPLIT_TRANSPORT)), custom)
|
|
QUANTUM_SRC += $(QUANTUM_DIR)/split_common/transport.c \
|
|
$(QUANTUM_DIR)/split_common/transactions.c
|
|
|
|
OPT_DEFS += -DSPLIT_COMMON_TRANSACTIONS
|
|
|
|
# Functions added via QUANTUM_LIB_SRC are only included in the final binary if they're called.
|
|
# Unused functions are pruned away, which is why we can add multiple drivers here without bloat.
|
|
ifeq ($(PLATFORM),AVR)
|
|
ifneq ($(NO_I2C),yes)
|
|
QUANTUM_LIB_SRC += i2c_master.c \
|
|
i2c_slave.c
|
|
endif
|
|
endif
|
|
|
|
SERIAL_DRIVER ?= bitbang
|
|
OPT_DEFS += -DSERIAL_DRIVER_$(strip $(shell echo $(SERIAL_DRIVER) | tr '[:lower:]' '[:upper:]'))
|
|
ifeq ($(strip $(SERIAL_DRIVER)), bitbang)
|
|
QUANTUM_LIB_SRC += serial.c
|
|
else
|
|
QUANTUM_LIB_SRC += serial_$(strip $(SERIAL_DRIVER)).c
|
|
endif
|
|
endif
|
|
COMMON_VPATH += $(QUANTUM_PATH)/split_common
|
|
endif
|
|
|
|
ifeq ($(strip $(CRC_ENABLE)), yes)
|
|
OPT_DEFS += -DCRC_ENABLE
|
|
SRC += crc.c
|
|
endif
|
|
|
|
HAPTIC_ENABLE ?= no
|
|
ifneq ($(strip $(HAPTIC_ENABLE)),no)
|
|
COMMON_VPATH += $(DRIVER_PATH)/haptic
|
|
OPT_DEFS += -DHAPTIC_ENABLE
|
|
SRC += $(QUANTUM_DIR)/haptic.c
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_haptic.c
|
|
endif
|
|
|
|
ifneq ($(filter DRV2605L, $(HAPTIC_ENABLE)), )
|
|
SRC += DRV2605L.c
|
|
QUANTUM_LIB_SRC += i2c_master.c
|
|
OPT_DEFS += -DDRV2605L
|
|
endif
|
|
|
|
ifneq ($(filter SOLENOID, $(HAPTIC_ENABLE)), )
|
|
SRC += solenoid.c
|
|
OPT_DEFS += -DSOLENOID_ENABLE
|
|
endif
|
|
|
|
ifeq ($(strip $(HD44780_ENABLE)), yes)
|
|
SRC += drivers/avr/hd44780.c
|
|
OPT_DEFS += -DHD44780_ENABLE
|
|
endif
|
|
|
|
ifeq ($(strip $(OLED_DRIVER_ENABLE)), yes)
|
|
OPT_DEFS += -DOLED_DRIVER_ENABLE
|
|
COMMON_VPATH += $(DRIVER_PATH)/oled
|
|
QUANTUM_LIB_SRC += i2c_master.c
|
|
SRC += oled_driver.c
|
|
endif
|
|
|
|
ifeq ($(strip $(ST7565_ENABLE)), yes)
|
|
OPT_DEFS += -DST7565_ENABLE
|
|
COMMON_VPATH += $(DRIVER_PATH)/oled # For glcdfont.h
|
|
COMMON_VPATH += $(DRIVER_PATH)/lcd
|
|
QUANTUM_LIB_SRC += spi_master.c
|
|
SRC += st7565.c
|
|
endif
|
|
|
|
include $(DRIVER_PATH)/qwiic/qwiic.mk
|
|
|
|
ifeq ($(strip $(UCIS_ENABLE)), yes)
|
|
OPT_DEFS += -DUCIS_ENABLE
|
|
UNICODE_COMMON := yes
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_ucis.c
|
|
endif
|
|
|
|
ifeq ($(strip $(UNICODEMAP_ENABLE)), yes)
|
|
OPT_DEFS += -DUNICODEMAP_ENABLE
|
|
UNICODE_COMMON := yes
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_unicodemap.c
|
|
endif
|
|
|
|
ifeq ($(strip $(UNICODE_ENABLE)), yes)
|
|
OPT_DEFS += -DUNICODE_ENABLE
|
|
UNICODE_COMMON := yes
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_unicode.c
|
|
endif
|
|
|
|
ifeq ($(strip $(UNICODE_COMMON)), yes)
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_unicode_common.c
|
|
endif
|
|
|
|
SPACE_CADET_ENABLE ?= yes
|
|
ifeq ($(strip $(SPACE_CADET_ENABLE)), yes)
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_space_cadet.c
|
|
OPT_DEFS += -DSPACE_CADET_ENABLE
|
|
endif
|
|
|
|
MAGIC_ENABLE ?= yes
|
|
ifeq ($(strip $(MAGIC_ENABLE)), yes)
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_magic.c
|
|
OPT_DEFS += -DMAGIC_KEYCODE_ENABLE
|
|
endif
|
|
|
|
GRAVE_ESC_ENABLE ?= yes
|
|
ifeq ($(strip $(GRAVE_ESC_ENABLE)), yes)
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_grave_esc.c
|
|
OPT_DEFS += -DGRAVE_ESC_ENABLE
|
|
endif
|
|
|
|
ifeq ($(strip $(DYNAMIC_MACRO_ENABLE)), yes)
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_dynamic_macro.c
|
|
OPT_DEFS += -DDYNAMIC_MACRO_ENABLE
|
|
endif
|
|
|
|
ifeq ($(strip $(COMBO_ENABLE)), yes)
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_combo.c
|
|
OPT_DEFS += -DCOMBO_ENABLE
|
|
endif
|
|
|
|
ifeq ($(strip $(KEY_OVERRIDE_ENABLE)), yes)
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_key_override.c
|
|
OPT_DEFS += -DKEY_OVERRIDE_ENABLE
|
|
endif
|
|
|
|
ifeq ($(strip $(TAP_DANCE_ENABLE)), yes)
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_tap_dance.c
|
|
OPT_DEFS += -DTAP_DANCE_ENABLE
|
|
endif
|
|
|
|
ifeq ($(strip $(KEY_LOCK_ENABLE)), yes)
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_key_lock.c
|
|
OPT_DEFS += -DKEY_LOCK_ENABLE
|
|
endif
|
|
|
|
ifeq ($(strip $(LEADER_ENABLE)), yes)
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_leader.c
|
|
OPT_DEFS += -DLEADER_ENABLE
|
|
endif
|
|
|
|
ifeq ($(strip $(AUTO_SHIFT_ENABLE)), yes)
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_auto_shift.c
|
|
OPT_DEFS += -DAUTO_SHIFT_ENABLE
|
|
ifeq ($(strip $(AUTO_SHIFT_MODIFIERS)), yes)
|
|
OPT_DEFS += -DAUTO_SHIFT_MODIFIERS
|
|
endif
|
|
endif
|
|
|
|
JOYSTICK_ENABLE ?= no
|
|
ifneq ($(strip $(JOYSTICK_ENABLE)), no)
|
|
OPT_DEFS += -DJOYSTICK_ENABLE
|
|
SRC += $(QUANTUM_DIR)/process_keycode/process_joystick.c
|
|
SRC += $(QUANTUM_DIR)/joystick.c
|
|
endif
|
|
|
|
ifeq ($(strip $(JOYSTICK_ENABLE)), analog)
|
|
OPT_DEFS += -DANALOG_JOYSTICK_ENABLE
|
|
SRC += analog.c
|
|
endif
|
|
|
|
ifeq ($(strip $(JOYSTICK_ENABLE)), digital)
|
|
OPT_DEFS += -DDIGITAL_JOYSTICK_ENABLE
|
|
endif
|
|
|
|
USBPD_ENABLE ?= no
|
|
VALID_USBPD_DRIVER_TYPES = custom vendor
|
|
USBPD_DRIVER ?= vendor
|
|
ifeq ($(strip $(USBPD_ENABLE)), yes)
|
|
ifeq ($(filter $(strip $(USBPD_DRIVER)),$(VALID_USBPD_DRIVER_TYPES)),)
|
|
$(error USBPD_DRIVER="$(USBPD_DRIVER)" is not a valid USBPD driver)
|
|
else
|
|
OPT_DEFS += -DUSBPD_ENABLE
|
|
ifeq ($(strip $(USBPD_DRIVER)), vendor)
|
|
# Vendor-specific implementations
|
|
OPT_DEFS += -DUSBPD_VENDOR
|
|
ifeq ($(strip $(MCU_SERIES)), STM32G4xx)
|
|
OPT_DEFS += -DUSBPD_STM32G4
|
|
SRC += usbpd_stm32g4.c
|
|
else
|
|
$(error There is no vendor-provided USBPD driver available)
|
|
endif
|
|
else ifeq ($(strip $(USBPD_DRIVER)), custom)
|
|
OPT_DEFS += -DUSBPD_CUSTOM
|
|
# Board designers can add their own driver to $(SRC)
|
|
endif
|
|
endif
|
|
endif
|