fern/qmk-firmware
1
0
Fork 0
mirror of https://github.com/firewalkwithm3/qmk_firmware.git synced 2024-11-23 03:50:28 +08:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
qmk-firmware/keyboards/macro3
History
Nick Brassel f6dd8dea2e
Remove usages of config_common.h from config.h files. (#19714)
2023-01-31 06:03:30 +11:00
..
keymaps/default Macro3: rename LAYOUT to LAYOUT_ortho_2x4 (#18820) 2022-10-23 00:07:31 +01:00
config.h Remove usages of config_common.h from config.h files. (#19714) 2023-01-31 06:03:30 +11:00
info.json Macro3: rename LAYOUT to LAYOUT_ortho_2x4 (#18820) 2022-10-23 00:07:31 +01:00
macro3.c [Keyboard] Update encoder code for macro3 (#16005) 2022-03-07 20:09:54 -08:00
macro3.h Macro3: rename LAYOUT to LAYOUT_ortho_2x4 (#18820) 2022-10-23 00:07:31 +01:00
post_config.h [Keyboard] Code updates for macro3 (#15280) 2021-11-29 00:18:33 -08:00
readme.md [Keyboard] Update encoder code for macro3 (#16005) 2022-03-07 20:09:54 -08:00
rules.mk Tidy up NKRO_ENABLE rules (#15382) 2021-12-09 16:05:44 +11:00

readme.md

Macro3

Macro3

Macro3 is a low-profile macro pad with dual encoder support designed by @davidphilipbarr.

Keyboard Info

Make example for this keyboard (after setting up your build environment):

make macro3:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the top right key and plug in the controller.
  • Keycode in layout: Press the key mapped to QK_BOOT if it is configured.
  • Physical reset pins: Briefly short the RST and GND pins on the microcontroller using tweezers, a paperclip, or any other conductive material.