fern/qmk-firmware
1
0
Fork 0
mirror of https://github.com/firewalkwithm3/qmk_firmware.git synced 2024-11-22 19:40:29 +08:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
qmk-firmware/keyboards/mechlovin/kay65
History
Ryan f9aeea64c1
Migrate MCU and BOOTLOADER to data-driven (#19529)
2023-02-08 18:41:46 +11:00
..
keymaps [Keyboard] Update Kay65 LED state (#18895) 2022-10-29 13:48:45 -07:00
config.h Remove unused SOFT_SERIAL_PIN from config.h (#19768) 2023-02-07 14:46:51 +00:00
info.json Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00
kay65.c [Keyboard] Fix mechlovin/kay65 (#16653) 2022-03-14 21:00:57 -07:00
kay65.h [Keyboard] correct matrix for Kay65 (#16751) 2022-04-13 07:20:00 -07:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

Kay65

Kay65

A 65% PCB with centered USB, RGB underglow and top right LED.

Make example for this keyboard (after setting up your build environment):

make mechlovin/kay65:default

Flashing example for this keyboard:

make mechlovin/kay65:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available