fern/qmk-firmware
1
0
Fork 0
mirror of https://github.com/firewalkwithm3/qmk_firmware.git synced 2024-11-23 03:50:28 +08:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
qmk-firmware/keyboards/ymd75
History
Nathan13888 4eebefada7
[Keyboard] YMD75 rev 3: fix BACKLIGHT_PIN (#11172) 
* YMD75 rev 3:  fix BACKLIGHT_PIN

Update backlight LED pin used by QMK to control the per-key backlight for YMD75 rev 3

* YMD75 rev 3: fix BACKLIGHT_PIN - fix comments

* YMD75: move BACKLIGHT_PIN definitions to the respective versions

Signed-off-by: Nathan13888 <29968201+Nathan13888@users.noreply.github.com>
2020-12-22 11:27:27 -08:00
..
keymaps [Keyboard] add support for ymd75 rev3 (#10483) 2020-10-04 15:19:34 -07:00
rev1 [Keyboard] YMD75 rev 3: fix BACKLIGHT_PIN (#11172) 2020-12-22 11:27:27 -08:00
rev2 [Keyboard] YMD75 rev 3: fix BACKLIGHT_PIN (#11172) 2020-12-22 11:27:27 -08:00
rev3 [Keyboard] YMD75 rev 3: fix BACKLIGHT_PIN (#11172) 2020-12-22 11:27:27 -08:00
.noci Initial list of keyboards to exclude from CI (#11213) 2020-12-21 15:38:39 +01:00
config.h [Keyboard] YMD75 rev 3: fix BACKLIGHT_PIN (#11172) 2020-12-22 11:27:27 -08:00
info.json [Keyboard] add support for ymd75 rev3 (#10483) 2020-10-04 15:19:34 -07:00
readme.md Rename keyboard-level readmes to lower-case (#10759) 2020-10-25 15:23:42 +00:00
rules.mk YMD75: move MCU/Bootloader rules to revision level (#9452) 2020-06-18 00:15:22 -07:00
ymd75.c Add support for YMD75 rev 2 (#8853) 2020-04-20 00:58:58 +01:00
ymd75.h [Keyboard] add support for ymd75 rev3 (#10483) 2020-10-04 15:19:34 -07:00

readme.md

YMD75 / MT84

75% keyboard from YMDK. YMDK sell the board and name it "YMD75", however revision 1 of the PCB has "MT84" printed on both sides.

Make example for this keyboard (after setting up your build environment):

make ymd75/rev1:default

Flashing example for this keyboard (after setting up the bootloadHID flashing environment)

make ymd75/rev1:default:flash

Reset Key: Hold down the key located at Key below the top right key, commonly programmed as Backspace while plugging in the keyboard. On PCB revision 2, enter the bootloader by holding L_CTRL while plugging in the keyboard.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.