mirror of https://github.com/firewalkwithm3/qmk_firmware.git synced 2024-11-22 19:40:29 +08:00

History

ridingqwerty d2e1cc4d48 Trim firmware sizes from default rules.mk, part 3 (#8045 )		2020-01-30 11:13:49 -08:00
..
keymaps/default	Remove/migrate action_get_macro()s from default keymaps (#5625 )	2019-07-15 23:04:02 -07:00
config.h	Replace DEBOUNCING_DELAY (deprecated) with DEBOUNCE (#5997 )	2019-06-06 12:09:56 -07:00
info.json	Fix Speedo keyboard dimensions in info.json	2019-04-13 01:27:41 -07:00
readme.md	Modified URLs to point to new locations	2019-01-13 09:11:18 -08:00
rules.mk	Trim firmware sizes from default rules.mk, part 3 (#8045 )	2020-01-30 11:13:49 -08:00
speedo.c	Add the Speedo keyboard	2018-04-07 12:56:21 -04:00
speedo.h	Speedo refactor and Configurator support (#3309 )	2018-07-04 18:06:04 -07:00

readme.md

Speedo

Keyboard Maintainer: Paul Ewing
Hardware Supported: Teensy 2.0
Hardware Availability: You will have to get the plates cut by an online service such as Ponoko. Case files are available in the Speedo Repository.

Make example for this keyboard (after setting up your build environment):

make speedo:default

See build environment setup then the make instructions for more information.

Flashing the Firmware

See the QMK docs for handwiring a keyboard; there is a section with instructions on how to flash the .hex file to the Teensy 2.0 controller.