fern/qmk-firmware
1
0
Fork 0
mirror of https://github.com/firewalkwithm3/qmk_firmware.git synced 2024-11-22 19:40:29 +08:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
qmk-firmware/keyboards/momoka_ergo
History
Joel Challis bcfe3a0718
Migrate split.soft_serial_pin to split.serial.pin H-O (#24185)
2024-07-23 15:49:11 +01:00
..
keymaps Adjust keycode alignment around QK_BOOT (#23697) 2024-05-11 16:50:48 +01:00
config.h Migrate LOCKING_*_ENABLE to Data-Driven: M, Part 2 (#23773) 2024-05-22 11:13:39 +01:00
keyboard.json Migrate split.soft_serial_pin to split.serial.pin H-O (#24185) 2024-07-23 15:49:11 +01:00
readme.md [Keyboard] Add Momoka ergo (#13127) 2021-07-20 10:46:29 -07:00

readme.md

momoka_ergo

momoka_ergo

The MOMOKA Ergo is a split keyboard that is based on the Ergodox standard layout. It has 35 keys and 11 RGB backlights on each part. The two parts of the keyboard is connected by a TRRS cable.

  • Keyboard Maintainer: StefanGrindelwald
  • Hardware Supported: momoka.co/ergo
  • Hardware Availability: momoka.co/ergo

Bootloader:

With the default keymap, you can easily use FN+Shift+D to enter the bootloader in left side and FN+shift+K in right side. Or you can just use the microswitch in the PCB.

Make example for this keyboard (after setting up your build environment):

make momoka_ergo:default

Flashing example for this keyboard(Note that you need flash the both side keyboard respectively):

For the left side:

make momoka_ergo:default:dfu-split-left

For the right side:

make momoka_ergo:default:dfu-split-right

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.