fern/qmk-firmware
1
0
Fork 0
mirror of https://github.com/firewalkwithm3/qmk_firmware.git synced 2024-11-23 03:50:28 +08:00
Code Issues Actions 2 Packages Projects Releases Wiki Activity
qmk-firmware/keyboards/mino
History
Ryan 74223c34a9
Remove legacy keycodes, part 6 (#18740) 
* `KC_RSHIFT` -> `KC_RSFT`

* `KC_RCTRL` -> `KC_RCTL`

* `KC_LSHIFT` -> `KC_LSFT`

* `KC_LCTRL` -> `KC_LCTL`
2022-10-16 14:14:40 +01:00
..
hotswap Remove UNUSED_PINS (#17931) 2022-08-06 23:23:35 +10:00
keymaps Remove legacy keycodes, part 6 (#18740) 2022-10-16 14:14:40 +01:00
mino.c [Keyboard] Add Mino Hotswap PCB (#16664) 2022-03-26 19:02:59 -07:00
mino.h [Keyboard] Add Mino Hotswap PCB (#16664) 2022-03-26 19:02:59 -07:00
readme.md RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 11:34:17 +01:00

readme.md

mino

Mino

A 47 key board with a retro twist.

  • Keyboard Maintainer: ShandonCodes
  • Hardware Supported: Mino PCB
  • Hardware Availability: Groupbuy

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available. For the default keymap it is the middle spacebar on the second layer.

Make example for this keyboard (after setting up your build environment):

make mino/hotswap:default

Flashing example for this keyboard:

make mino/hotswap:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.