diff --git a/apps/accelerometer-test/app.c b/apps/accelerometer-test/app.c
index 4a64e35..a52fbbf 100644
--- a/apps/accelerometer-test/app.c
+++ b/apps/accelerometer-test/app.c
@@ -36,10 +36,10 @@ void app_init(void) {
 
     watch_enable_i2c();
     lis2dw_begin();
-    lis2dw_set_low_power_mode(LIS2DW_LP_MODE_2); // lowest power 14-bit mode, 25 Hz is 3.5 µA @ 1.8V w/ low noise, 3µA without
-    lis2dw_set_low_noise_mode(true); // consumes a little more power
-    lis2dw_set_range(LIS2DW_CTRL6_VAL_RANGE_4G);
-    lis2dw_set_data_rate(LIS2DW_DATA_RATE_25_HZ); // is this enough for training?
+    lis2dw_set_data_rate(LIS2DW_DATA_RATE_25_HZ);
+    lis2dw_set_range(LIS2DW_RANGE_4_G);
+    lis2dw_set_low_noise_mode(true);
+    lis2dw_enable_fifo();
 
     lis2dw_enable_fifo();
 
diff --git a/movement/watch_faces/sensor/accelerometer_data_acquisition_face.c b/movement/watch_faces/sensor/accelerometer_data_acquisition_face.c
index d965ec2..ea50ad2 100644
--- a/movement/watch_faces/sensor/accelerometer_data_acquisition_face.c
+++ b/movement/watch_faces/sensor/accelerometer_data_acquisition_face.c
@@ -28,6 +28,7 @@
 
 static const char activity_types[][3] = {
     "ID",   // Idle
+    "OF",   // Off-wrist
     "SL",   // Sleeping
     "WH",   // Washing Hands
     "WA",   // Walking
@@ -281,7 +282,13 @@ static void advance_current_setting(accelerometer_data_acquisition_state_t *stat
 
 static void start_reading(accelerometer_data_acquisition_state_t *state) {
     (void) state;
-    printf("TODO: Activate I2C bus and turn on accelerometer\n");
+    watch_enable_i2c();
+    lis2dw_begin();
+    lis2dw_set_data_rate(LIS2DW_DATA_RATE_25_HZ);
+    lis2dw_set_range(LIS2DW_RANGE_4_G);
+    lis2dw_set_low_noise_mode(true);
+    lis2dw_enable_fifo();
+
     printf("TODO: Write header\n");
 }
 
@@ -301,5 +308,6 @@ static void finish_reading(accelerometer_data_acquisition_state_t *state) {
         state->next_available_page++;
         state->pos = 0;
     }
-    printf("TODO: Turn off accelerometer and disable I2C bus\n");
+    lis2dw_set_data_rate(LIS2DW_DATA_RATE_POWERDOWN);
+    watch_disable_i2c();
 }
diff --git a/watch-library/shared/driver/lis2dw.c b/watch-library/shared/driver/lis2dw.c
index f273fab..0b788fc 100644
--- a/watch-library/shared/driver/lis2dw.c
+++ b/watch-library/shared/driver/lis2dw.c
@@ -31,12 +31,8 @@ bool lis2dw_begin(void) {
     }
     watch_i2c_write8(LIS2DW_ADDRESS, LIS2DW_REG_CTRL2, LIS2DW_CTRL2_VAL_BOOT);
     watch_i2c_write8(LIS2DW_ADDRESS, LIS2DW_REG_CTRL2, LIS2DW_CTRL2_VAL_SOFT_RESET);
-    // Start at lowest possible data rate and lowest possible power mode
-    watch_i2c_write8(LIS2DW_ADDRESS, LIS2DW_REG_CTRL1, LIS2DW_CTRL1_VAL_ODR_LOWEST | LIS2DW_CTRL1_VAL_MODE_LOW_POWER | LIS2DW_CTRL1_VAL_LPMODE_1);
     // Enable block data update (output registers not updated until MSB and LSB have been read) and address autoincrement
     watch_i2c_write8(LIS2DW_ADDRESS, LIS2DW_REG_CTRL2, LIS2DW_CTRL2_VAL_BDU | LIS2DW_CTRL2_VAL_IF_ADD_INC);
-    // Set range to ±2G
-    watch_i2c_write8(LIS2DW_ADDRESS, LIS2DW_REG_CTRL6, LIS2DW_CTRL6_VAL_RANGE_2G);
 
     return true;
 }