implement SPI flash chip

apps/spi-test/app.c

@@ -2,11 +2,20 @@
 #include <string.h>
 #include <peripheral_clk_config.h>
 #include "watch.h"
+#include "spiflash.h"
 
 // this is a very basic app to confirm that SPI is working, tested with board OSO-MISC-21-017 and a GD25Q16C Flash chip.
 
 void app_init(void) {
-    watch_enable_spi();
+    spi_flash_init();
+
+    uint8_t buf[3] = {1, 2, 3};
+    flash_enable();
+    spi_flash_command(CMD_ENABLE_WRITE);
+    // note that you will need to erase the sector to write different values later:
+    // spi_flash_sector_command(CMD_SECTOR_ERASE, 0);
+    spi_flash_write_data(0, buf, 3);
+    flash_disable();
 }
 
 void app_wake_from_backup(void) {
@@ -23,20 +32,13 @@ void app_wake_from_standby(void) {
 
 
 bool app_loop(void) {
-    uint8_t get_id_command[1] = {0x9F};
     uint8_t buf[3] = {0};
 
-    watch_set_pin_level(A3, false);
+    flash_enable();
-
+    // should print 1, 2, 3
-    // should print 0, 0, 0
+    spi_flash_read_data(0, buf, 3);
-    watch_spi_send(get_id_command, 1);
+    printf("data: %x, %x, %x\n", buf[0], buf[1], buf[2]);
-    printf("blank: %x, %x, %x\n", buf[0], buf[1], buf[2]);
+    flash_disable();
-
-    // should print c8, 40, 15
-    watch_spi_receive(buf, 3);
-    printf("ident: %x, %x, %x\n", buf[0], buf[1], buf[2]);
-
-    watch_set_pin_level(A3, true);
 
     delay_ms(100);
 

apps/spi-test/watch_spi.c

@@ -0,0 +1,46 @@
+/*
+ * MIT License
+ *
+ * Copyright (c) 2022 Joey Castillo
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include "watch_spi.h"
+
+struct io_descriptor *spi_io;
+
+void watch_enable_spi(void) {
+    SPI_0_init();
+    spi_m_sync_get_io_descriptor(&SPI_0, &spi_io);
+    spi_m_sync_enable(&SPI_0);
+}
+
+void watch_disable_spi(void) {
+    spi_m_sync_disable(&SPI_0);
+    spi_io = NULL;
+}
+
+void watch_spi_read(const uint8_t *buf, uint16_t length) {
+	io_write(spi_io, buf, length);
+}
+
+void watch_spi_read(uint8_t *buf, uint16_t length) {
+	io_read(spi_io, buf, length);
+}

make.mk

@@ -119,6 +119,7 @@ SRCS += \
   $(TOP)/watch-library/hardware/hpl/systick/hpl_systick.c \
   $(TOP)/watch-library/shared/driver/lis2dh.c \
   $(TOP)/watch-library/shared/driver/lis2dw.c \
+  $(TOP)/watch-library/shared/driver/spiflash.c \
   $(TOP)/watch-library/shared/watch/watch_private_display.c \
   $(TOP)/watch-library/shared/watch/watch_utility.c \
 

watch-library/hardware/hw/driver_init.c

@@ -90,16 +90,6 @@ void SPI_0_PORT_init(void) {
 	gpio_set_pin_direction(A1, GPIO_DIRECTION_OUT);
 
 	gpio_set_pin_function(A1, PINMUX_PB01C_SERCOM3_PAD3);
-
-	gpio_set_pin_level(A3,
-	                   // <y> Initial level
-	                   // <id> pad_initial_level
-	                   // <false"> Low
-	                   // <true"> High
-	                   true);
-
-	// Set pin direction to output
-	gpio_set_pin_direction(A3, GPIO_DIRECTION_OUT);
 }
 
 void SPI_0_CLOCK_init(void) {

watch-library/hardware/watch/watch_spi.c

@@ -37,10 +37,18 @@ void watch_disable_spi(void) {
     spi_io = NULL;
 }
 
-void watch_spi_send(uint8_t *buf, uint16_t length) {
+bool watch_spi_write(const uint8_t *buf, uint16_t length) {
-	io_write(spi_io, buf, length);
+	return !!io_write(spi_io, buf, length);
 }
 
-void watch_spi_receive(uint8_t *buf, uint16_t length) {
+bool watch_spi_read(uint8_t *buf, uint16_t length) {
-	io_read(spi_io, buf, length);
+	return !!io_read(spi_io, buf, length);
+}
+
+bool watch_spi_transfer(const uint8_t *data_out, uint8_t *data_in, uint16_t length) {
+    struct spi_xfer xfer;
+    xfer.txbuf = (uint8_t *)data_out;
+    xfer.rxbuf = data_in;
+    xfer.size = length;
+    return !!spi_m_sync_transfer(&SPI_0, &xfer);
 }

watch-library/shared/driver/spiflash.c

@@ -0,0 +1,120 @@
+/*
+ * MIT License
+ *
+ * Copyright (c) 2022 Joey Castillo
+ *
+ * Ported from MIT-licensed code from CircuitPython
+ * Copyright (c) 2016, 2017 Scott Shawcroft for Adafruit Industries
+ *
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include "spiflash.h"
+
+#define SPI_FLASH_FAST_READ false
+
+static void flash_enable(void) {
+    watch_set_pin_level(A3, false);
+}
+
+static void flash_disable(void) {
+    watch_set_pin_level(A3, true);
+}
+
+static bool transfer(uint8_t *command, uint32_t command_length, uint8_t *data_in, uint8_t *data_out, uint32_t data_length) {
+    bool status = watch_spi_write(command, command_length);
+    if (status) {
+        if (data_in != NULL && data_out != NULL) {
+            status = watch_spi_transfer(data_out, data_in, data_length);
+        } else if (data_out != NULL) {
+            status = watch_spi_read(data_out, data_length);
+        } else if (data_in != NULL) {
+            status = watch_spi_write(data_in, data_length);
+        }
+    }
+    flash_disable();
+    return status;
+}
+
+static bool transfer_command(uint8_t command, uint8_t *data_in, uint8_t *data_out, uint32_t data_length) {
+    return transfer(&command, 1, data_in, data_out, data_length);
+}
+
+bool spi_flash_command(uint8_t command) {
+    return transfer_command(command, NULL, NULL, 0);
+}
+
+bool spi_flash_read_command(uint8_t command, uint8_t *data, uint32_t data_length) {
+    return transfer_command(command, NULL, data, data_length);
+}
+
+bool spi_flash_write_command(uint8_t command, uint8_t *data, uint32_t data_length) {
+    return transfer_command(command, data, NULL, data_length);
+}
+
+// Pack the low 24 bits of the address into a uint8_t array.
+static void address_to_bytes(uint32_t address, uint8_t *bytes) {
+    bytes[0] = (address >> 16) & 0xff;
+    bytes[1] = (address >> 8) & 0xff;
+    bytes[2] = address & 0xff;
+}
+
+bool spi_flash_sector_command(uint8_t command, uint32_t address) {
+    uint8_t request[4] = {command, 0x00, 0x00, 0x00};
+    address_to_bytes(address, request + 1);
+    return transfer(request, 4, NULL, NULL, 0);
+}
+
+bool spi_flash_write_data(uint32_t address, uint8_t *data, uint32_t data_length) {
+    uint8_t request[4] = {CMD_PAGE_PROGRAM, 0x00, 0x00, 0x00};
+    // Write the SPI flash write address into the bytes following the command byte.
+    address_to_bytes(address, request + 1);
+    flash_enable();
+    bool status = watch_spi_write(request, 4);
+    if (status) {
+        status = watch_spi_write(data, data_length);
+    }
+    flash_disable();
+    return status;
+}
+
+bool spi_flash_read_data(uint32_t address, uint8_t *data, uint32_t data_length) {
+    uint8_t request[5] = {CMD_READ_DATA, 0x00, 0x00, 0x00};
+    uint8_t command_length = 4;
+    if (SPI_FLASH_FAST_READ) {
+        request[0] = CMD_FAST_READ_DATA;
+        command_length = 5;
+    }
+    // Write the SPI flash read address into the bytes following the command byte.
+    address_to_bytes(address, request + 1);
+    flash_enable();
+    bool status = watch_spi_write(request, command_length);
+    if (status) {
+        status = watch_spi_read(data, data_length);
+    }
+    flash_disable();
+    return status;
+}
+
+void spi_flash_init(void) {
+	gpio_set_pin_level(A3, true);
+	gpio_set_pin_direction(A3, GPIO_DIRECTION_OUT);
+    watch_enable_spi();
+}

watch-library/shared/driver/spiflash.h

@@ -0,0 +1,56 @@
+/*
+ * MIT License
+ *
+ * Copyright (c) 2022 Joey Castillo
+ *
+ * Ported from MIT-licensed code from CircuitPython
+ * Copyright (c) 2016, 2017 Scott Shawcroft for Adafruit Industries
+ *
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in all
+ * copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include "watch.h"
+
+#define CMD_READ_JEDEC_ID 0x9f
+#define CMD_READ_DATA 0x03
+#define CMD_FAST_READ_DATA 0x0B
+#define CMD_SECTOR_ERASE 0x20
+// #define CMD_SECTOR_ERASE CMD_READ_JEDEC_ID
+#define CMD_DISABLE_WRITE 0x04
+#define CMD_ENABLE_WRITE 0x06
+#define CMD_PAGE_PROGRAM 0x02
+// #define CMD_PAGE_PROGRAM CMD_READ_JEDEC_ID
+#define CMD_READ_STATUS 0x05
+#define CMD_READ_STATUS2 0x35
+#define CMD_WRITE_STATUS_BYTE1 0x01
+#define CMD_WRITE_STATUS_BYTE2 0x31
+#define CMD_DUAL_READ 0x3b
+#define CMD_QUAD_READ 0x6b
+#define CMD_ENABLE_RESET 0x66
+#define CMD_RESET 0x99
+#define CMD_WAKE 0xab
+
+bool spi_flash_command(uint8_t command);
+bool spi_flash_read_command(uint8_t command, uint8_t *response, uint32_t length);
+bool spi_flash_write_command(uint8_t command, uint8_t *data, uint32_t length);
+bool spi_flash_sector_command(uint8_t command, uint32_t address);
+bool spi_flash_write_data(uint32_t address, uint8_t *data, uint32_t data_length);
+bool spi_flash_read_data(uint32_t address, uint8_t *data, uint32_t data_length);
+void spi_flash_init(void);

watch-library/shared/watch/watch_spi.h

@@ -41,19 +41,26 @@ void watch_enable_spi(void);
   */
 void watch_disable_spi(void);
 
-/** @brief Sends a series of values to a device on the SPI bus.
+/** @brief Writes a series of values to a device on the SPI bus.
   * @param buf A series of unsigned bytes; the data you wish to transmit.
   * @param length The number of bytes in buf that you wish to send.
   * @note This function does not manage the chip select pin (usually A3).
   */
-void watch_spi_send(uint8_t *buf, uint16_t length);
+bool watch_spi_write(const uint8_t *buf, uint16_t length);
 
-/** @brief Receives a series of values from a device on the SPI bus.
+/** @brief Reads a series of values from a device on the SPI bus.
   * @param buf Storage for the incoming bytes; on return, it will contain the received data.
   * @param length The number of bytes that you wish to receive.
   * @note This function does not manage the chip select pin (usually A3).
   */
-void watch_spi_receive(uint8_t *buf, uint16_t length);
+bool watch_spi_read(uint8_t *buf, uint16_t length);
+
+/** @brief Reads a series of values from a device on the SPI bus.
+  * @param buf Storage for the incoming bytes; on return, it will contain the received data.
+  * @param length The number of bytes that you wish to receive.
+  * @note This function does not manage the chip select pin (usually A3).
+  */
+bool watch_spi_transfer(const uint8_t *data_out, uint8_t *data_in, uint16_t length);
 
 /// @}
 #endif

watch-library/simulator/watch/watch_spi.c

@@ -28,6 +28,8 @@ void watch_enable_spi(void) {}
 
 void watch_disable_spi(void) {}
 
-void watch_spi_send(uint8_t *buf, uint16_t length) {}
+bool watch_spi_write(const uint8_t *buf, uint16_t length) { return false; }
 
-void watch_spi_receive(uint8_t *buf, uint16_t length) {}
+bool watch_spi_read(uint8_t *buf, uint16_t length) { return false; }
+
+bool watch_spi_transfer(const uint8_t *data_out, uint8_t *data_in, uint16_t length) { return false; }