From 8e06100b81c0218e09d97ae09b0feea20bc3d460 Mon Sep 17 00:00:00 2001 From: Joey Castillo Date: Thu, 9 Dec 2021 12:25:26 -0500 Subject: [PATCH] more accelerometer and temperature board tests --- ...OSO-MISC-21-021 Sensor Watch Motion II.brd | 100 +- ...-21-022 Temperature + GPIO + I2C Board.brd | 285 ++- ...023 Temperature + GPIO + I2C Alternate.brd | 672 ++++++ ...023 Temperature + GPIO + I2C Alternate.sch | 2073 +++++++++++++++++ ...4 Temperature + GPIO + I2C Alternate 2.brd | 688 ++++++ ...4 Temperature + GPIO + I2C Alternate 2.sch | 2073 +++++++++++++++++ 6 files changed, 5699 insertions(+), 192 deletions(-) create mode 100644 PCB/Sensor Boards/OSO-MISC-21-023 Temperature + GPIO + I2C Alternate.brd create mode 100644 PCB/Sensor Boards/OSO-MISC-21-023 Temperature + GPIO + I2C Alternate.sch create mode 100644 PCB/Sensor Boards/OSO-MISC-21-024 Temperature + GPIO + I2C Alternate 2.brd create mode 100644 PCB/Sensor Boards/OSO-MISC-21-024 Temperature + GPIO + I2C Alternate 2.sch diff --git a/PCB/Sensor Boards/OSO-MISC-21-021 Sensor Watch Motion II.brd b/PCB/Sensor Boards/OSO-MISC-21-021 Sensor Watch Motion II.brd index 0d91bfc..28e4da6 100644 --- a/PCB/Sensor Boards/OSO-MISC-21-021 Sensor Watch Motion II.brd +++ b/PCB/Sensor Boards/OSO-MISC-21-021 Sensor Watch Motion II.brd @@ -3,14 +3,14 @@ - + - + @@ -23,18 +23,18 @@ - + - + - + - + @@ -48,9 +48,9 @@ - + - + @@ -60,7 +60,7 @@ - + @@ -207,7 +207,7 @@ Motion II -I²C: LIS2DW (0x19) +I²C: LIS2DW12 (0x19) A1/A2: UART RX/TX A3/A4: INT2/INT1 @@ -503,7 +503,7 @@ Note, that not all DRC settings must be set by the manufacturer. Several can be - + @@ -590,33 +590,33 @@ Note, that not all DRC settings must be set by the manufacturer. Several can be - + + - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + - - - + + + + @@ -655,26 +655,9 @@ Note, that not all DRC settings must be set by the manufacturer. Several can be - - - - - - - - - - - - - - - - - @@ -683,6 +666,21 @@ Note, that not all DRC settings must be set by the manufacturer. Several can be + + + + + + + + + + + + + + + @@ -717,6 +715,10 @@ Note, that not all DRC settings must be set by the manufacturer. Several can be + + + + diff --git a/PCB/Sensor Boards/OSO-MISC-21-022 Temperature + GPIO + I2C Board.brd b/PCB/Sensor Boards/OSO-MISC-21-022 Temperature + GPIO + I2C Board.brd index 46fee50..584cec7 100644 --- a/PCB/Sensor Boards/OSO-MISC-21-022 Temperature + GPIO + I2C Board.brd +++ b/PCB/Sensor Boards/OSO-MISC-21-022 Temperature + GPIO + I2C Board.brd @@ -3,11 +3,11 @@ - + - + @@ -189,36 +189,36 @@ - - - - - - - - - - -Temperature+GPIO + + + + + + + + + + +Temperature+GPIO Sensor Board - - - - -A0: Thermistor !EN + + + + +A0: Thermistor !EN A2: Temp. Sense A1/A4/SDA/SCL: Test Points -Digital IO +Digital IO Analog input PWM on TC3 UART RX/TX Interrupt 1/0 A4 ONLY: Ext. wake 0 -A1/A4 Uses - - - +A1/A4 Uses + + + @@ -471,101 +471,100 @@ Note, that not all DRC settings must be set by the manufacturer. Several can be - - - - + + + + - - - + + + - - - - - + + + + + - - - - - + + + + + - - - - - + + + + + - - - - - + + + + + - - - - - + + + + + - - - - - + + + + + - - - + + + - - - - - - - - - + + + + + + + + + - - - + + + - - - - - + + + + - - - - - - - - - + + + + + + + + + @@ -574,49 +573,49 @@ Note, that not all DRC settings must be set by the manufacturer. Several can be - - - - - - - - - - - + + + + + + + + + + + - - - - - - - - - - - - - + + + + + + + + + + + + - - - - - - - - - - + + + + + + + + + + + @@ -627,26 +626,26 @@ Note, that not all DRC settings must be set by the manufacturer. Several can be - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + diff --git a/PCB/Sensor Boards/OSO-MISC-21-023 Temperature + GPIO + I2C Alternate.brd b/PCB/Sensor Boards/OSO-MISC-21-023 Temperature + GPIO + I2C Alternate.brd new file mode 100644 index 0000000..143c279 --- /dev/null +++ b/PCB/Sensor Boards/OSO-MISC-21-023 Temperature + GPIO + I2C Alternate.brd @@ -0,0 +1,672 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Temperature+GPIO +Sensor Board + + + + +A0: Thermistor !EN +A2: Temp. Sense +A1/A4/SDA/SCL: +Test Points +Digital IO +Analog input +PWM on TC3 +UART RX/TX +Interrupt 1/0 +A4 ONLY: Ext. wake 0 +A1/A4 Uses + + + + + + + +<b>https://componentsearchengine.com</b><p> +<author>Created by SamacSys</author> + + +<b>FH19C-9S-0.5SH(10)-1</b><br> + + + + + + + + + + + + + + + + + + + + + + + + + +<h2><b>microBuilder.eu</b> Eagle Footprint Library</h2> + +<p>Footprints for common components used in our projects and products. This is the same library that we use internally, and it is regularly updated. The newest version can always be found at <b>www.microBuilder.eu</b>. If you find this library useful, please feel free to purchase something from our online store. Please also note that all holes are optimised for metric drill bits!</p> + +<h3>Obligatory Warning</h3> +<p>While it probably goes without saying, there are no guarantees that the footprints or schematic symbols in this library are flawless, and we make no promises of fitness for production, prototyping or any other purpose. These libraries are provided for information puposes only, and are used at your own discretion. While we make every effort to produce accurate footprints, and many of the items found in this library have be proven in production, we can't make any promises of suitability for a specific purpose. If you do find any errors, though, please feel free to contact us at www.microbuilder.eu to let us know about it so that we can update the library accordingly!</p> + +<h3>License</h3> +<p>This work is placed in the public domain, and may be freely used for commercial and non-commercial work with the following conditions:</p> +<p>THIS SOFTWARE IS PROVIDED ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +</p> + + +<b>0603 MicroPitch</b> + + + + + +>NAME +>VALUE + + + + + + + +<b>Test Pins/Pads</b><p> +Cream on SMD OFF.<br> +new: Attribute TP_SIGNAL_NAME<br> +<author>Created by librarian@cadsoft.de</author> + + +<b>TEST PAD</b> + + + +>NAME +>VALUE +>TP_SIGNAL_NAME + + + + +TEST PAD + + + + + + + + + + + + + + + + + + + + + +<b>OSH Park Design Rules</b> +<p> +Please make sure your boards conform to these design rules. +</p> +<p> +Note, that not all DRC settings must be set by the manufacturer. Several can be adjusted for the design, including those listed on our docs page here. +<a href="http://docs.oshpark.com/design-tools/eagle/design-rules-files/">Adjustable Settings</a> +</p> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Since Version 6.2.2 text objects can contain more than one line, +which will not be processed correctly with this version. + + +Since Version 8.2, EAGLE supports online libraries. The ids +of those online libraries will not be understood (or retained) +with this version. + + +Since Version 8.3, EAGLE supports URNs for individual library +assets (packages, symbols, and devices). The URNs of those assets +will not be understood (or retained) with this version. + + +Since Version 8.3, EAGLE supports the association of 3D packages +with devices in libraries, schematics, and board files. Those 3D +packages will not be understood (or retained) with this version. + + + diff --git a/PCB/Sensor Boards/OSO-MISC-21-023 Temperature + GPIO + I2C Alternate.sch b/PCB/Sensor Boards/OSO-MISC-21-023 Temperature + GPIO + I2C Alternate.sch new file mode 100644 index 0000000..84ab13f --- /dev/null +++ b/PCB/Sensor Boards/OSO-MISC-21-023 Temperature + GPIO + I2C Alternate.sch @@ -0,0 +1,2073 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Generated from <b>Hiking Log FeatherWing.brd</b><p> +by exp-lbrs.ulp + + + + + + + + + + + + + + + + + + + + +>DRAWING_NAME +>LAST_DATE_TIME +>SHEET +Sheet: + +oddly +specific +objects +by joey castillo +cc-by-sa 4.0 + + + + +<b>FRAME</b><p> +DIN A4, landscape with location and doc. field + + + + + + + + + + + + + + +<b>https://componentsearchengine.com</b><p> +<author>Created by SamacSys</author> + + +<b>FH19C-9S-0.5SH(10)-1</b><br> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<h2><b>microBuilder.eu</b> Eagle Footprint Library</h2> + +<p>Footprints for common components used in our projects and products. This is the same library that we use internally, and it is regularly updated. The newest version can always be found at <b>www.microBuilder.eu</b>. If you find this library useful, please feel free to purchase something from our online store. Please also note that all holes are optimised for metric drill bits!</p> + +<h3>Obligatory Warning</h3> +<p>While it probably goes without saying, there are no guarantees that the footprints or schematic symbols in this library are flawless, and we make no promises of fitness for production, prototyping or any other purpose. These libraries are provided for information puposes only, and are used at your own discretion. While we make every effort to produce accurate footprints, and many of the items found in this library have be proven in production, we can't make any promises of suitability for a specific purpose. If you do find any errors, though, please feel free to contact us at www.microbuilder.eu to let us know about it so that we can update the library accordingly!</p> + +<h3>License</h3> +<p>This work is placed in the public domain, and may be freely used for commercial and non-commercial work with the following conditions:</p> +<p>THIS SOFTWARE IS PROVIDED ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +</p> + + +0603-Mini +<p>Mini footprint for dense boards</p> + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b> 0402</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>0402 MicroPitch<p> + + + + + +>NAME +>VALUE + + + + + +<b>0603</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>0603 MicroPitch</b> + + + + + +>NAME +>VALUE + + + + + +<b>0805</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>0805 MicroPitch</b> + + + + + +>NAME +>VALUE + + + + + + + + + +>NAME +>VALUE + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>RESISTOR 2512 (Metric 6432)</b> + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + +>NAME +>VALUE + + + + + + +<p><b>Resistors</b></p> +<p>For new designs, use the packages preceded by an '_' character since they are more reliable:</p> +<p>The following footprints should be used on most boards:</p> +<ul> +<li><b>_0402</b> - Standard footprint for regular board layouts</li> +<li><b>_0603</b> - Standard footprint for regular board layouts</li> +<li><b>_0805</b> - Standard footprint for regular board layouts</li> +<li><b>_1206</b> - Standard footprint for regular board layouts</li> +</ul> +<p>For extremely tight-pitch boards where space is at a premium, the following 'micro-pitch' footprints can be used (smaller pads, no silkscreen outline, etc.):</p> +<ul> +<li><b>_0402MP</b> - Micro-pitch footprint for very dense/compact boards</li> +<li><b>_0603MP</b> - Micro-pitch footprint for very dense/compact boards</li> +<li><b>_0805MP</b> - Micro-pitch footprint for very dense/compact boards</li> +<li><b>_1206MP</b> - Micro-pitch footprint for very dense/compact boards</li> +</ul> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<b>Supply Symbols</b><p> + GND, VCC, 0V, +5V, -5V, etc.<p> + Please keep in mind, that these devices are necessary for the + automatic wiring of the supply signals.<p> + The pin name defined in the symbol is identical to the net which is to be wired automatically.<p> + In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p> + <author>Created by librarian@cadsoft.de</author> + + + + + +>VALUE + + + + + +>VALUE + + + + + +<b>SUPPLY SYMBOL</b> + + + + + + + + + + + + +<b>SUPPLY SYMBOL</b> + + + + + + + + + + + + + + +<b>Test Pins/Pads</b><p> +Cream on SMD OFF.<br> +new: Attribute TP_SIGNAL_NAME<br> +<author>Created by librarian@cadsoft.de</author> + + +<b>TEST PAD</b> + + + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + + + + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + + +>NAME +>VALUE +>TP_SIGNAL_NAME + + + +<b>TEST PAD</b> + + +>NAME +>VALUE +>TP_SIGNAL_NAME + + + +<b>TEST PAD</b> + + +>NAME +>VALUE +>TP_SIGNAL_NAME + + + +<b>TEST PAD</b> + + +>NAME +>VALUE +>TP_SIGNAL_NAME + + + +<b>TEST PAD</b> + + +>NAME +>VALUE +>TP_SIGNAL_NAME + + + +<b>TEST PAD</b> + + +>NAME +>VALUE +>TP_SIGNAL_NAME + + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + + + + + + + +>NAME +>TP_SIGNAL_NAME + + + + + +<b>Test pad</b> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Since Version 6.2.2 text objects can contain more than one line, +which will not be processed correctly with this version. + + +Since Version 8.2, EAGLE supports online libraries. The ids +of those online libraries will not be understood (or retained) +with this version. + + +Since Version 8.3, EAGLE supports URNs for individual library +assets (packages, symbols, and devices). The URNs of those assets +will not be understood (or retained) with this version. + + +Since Version 8.3, EAGLE supports the association of 3D packages +with devices in libraries, schematics, and board files. Those 3D +packages will not be understood (or retained) with this version. + + + diff --git a/PCB/Sensor Boards/OSO-MISC-21-024 Temperature + GPIO + I2C Alternate 2.brd b/PCB/Sensor Boards/OSO-MISC-21-024 Temperature + GPIO + I2C Alternate 2.brd new file mode 100644 index 0000000..8076da4 --- /dev/null +++ b/PCB/Sensor Boards/OSO-MISC-21-024 Temperature + GPIO + I2C Alternate 2.brd @@ -0,0 +1,688 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Temperature+GPIO +Sensor Board + + + + +A0: Thermistor !EN +A2: Temp. Sense +A1/A4/SDA/SCL: +Test Points +Digital IO +Analog input +PWM on TC3 +UART RX/TX +Interrupt 1/0 +A4 ONLY: Ext. wake 0 +A1/A4 Uses + + + + + + + +<b>https://componentsearchengine.com</b><p> +<author>Created by SamacSys</author> + + +<b>FH19C-9S-0.5SH(10)-1</b><br> + + + + + + + + + + + + + + + + + + + + + + + + + +<h2><b>microBuilder.eu</b> Eagle Footprint Library</h2> + +<p>Footprints for common components used in our projects and products. This is the same library that we use internally, and it is regularly updated. The newest version can always be found at <b>www.microBuilder.eu</b>. If you find this library useful, please feel free to purchase something from our online store. Please also note that all holes are optimised for metric drill bits!</p> + +<h3>Obligatory Warning</h3> +<p>While it probably goes without saying, there are no guarantees that the footprints or schematic symbols in this library are flawless, and we make no promises of fitness for production, prototyping or any other purpose. These libraries are provided for information puposes only, and are used at your own discretion. While we make every effort to produce accurate footprints, and many of the items found in this library have be proven in production, we can't make any promises of suitability for a specific purpose. If you do find any errors, though, please feel free to contact us at www.microbuilder.eu to let us know about it so that we can update the library accordingly!</p> + +<h3>License</h3> +<p>This work is placed in the public domain, and may be freely used for commercial and non-commercial work with the following conditions:</p> +<p>THIS SOFTWARE IS PROVIDED ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +</p> + + +<b>0603 MicroPitch</b> + + + + + +>NAME +>VALUE + + + + + + + +<b>Test Pins/Pads</b><p> +Cream on SMD OFF.<br> +new: Attribute TP_SIGNAL_NAME<br> +<author>Created by librarian@cadsoft.de</author> + + +<b>TEST PAD</b> + + + +>NAME +>VALUE +>TP_SIGNAL_NAME + + + + +TEST PAD + + + + + + + + + + + + + + + + + + + + + +<b>OSH Park Design Rules</b> +<p> +Please make sure your boards conform to these design rules. +</p> +<p> +Note, that not all DRC settings must be set by the manufacturer. Several can be adjusted for the design, including those listed on our docs page here. +<a href="http://docs.oshpark.com/design-tools/eagle/design-rules-files/">Adjustable Settings</a> +</p> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Since Version 6.2.2 text objects can contain more than one line, +which will not be processed correctly with this version. + + +Since Version 8.2, EAGLE supports online libraries. The ids +of those online libraries will not be understood (or retained) +with this version. + + +Since Version 8.3, EAGLE supports URNs for individual library +assets (packages, symbols, and devices). The URNs of those assets +will not be understood (or retained) with this version. + + +Since Version 8.3, EAGLE supports the association of 3D packages +with devices in libraries, schematics, and board files. Those 3D +packages will not be understood (or retained) with this version. + + + diff --git a/PCB/Sensor Boards/OSO-MISC-21-024 Temperature + GPIO + I2C Alternate 2.sch b/PCB/Sensor Boards/OSO-MISC-21-024 Temperature + GPIO + I2C Alternate 2.sch new file mode 100644 index 0000000..84ab13f --- /dev/null +++ b/PCB/Sensor Boards/OSO-MISC-21-024 Temperature + GPIO + I2C Alternate 2.sch @@ -0,0 +1,2073 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Generated from <b>Hiking Log FeatherWing.brd</b><p> +by exp-lbrs.ulp + + + + + + + + + + + + + + + + + + + + +>DRAWING_NAME +>LAST_DATE_TIME +>SHEET +Sheet: + +oddly +specific +objects +by joey castillo +cc-by-sa 4.0 + + + + +<b>FRAME</b><p> +DIN A4, landscape with location and doc. field + + + + + + + + + + + + + + +<b>https://componentsearchengine.com</b><p> +<author>Created by SamacSys</author> + + +<b>FH19C-9S-0.5SH(10)-1</b><br> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<h2><b>microBuilder.eu</b> Eagle Footprint Library</h2> + +<p>Footprints for common components used in our projects and products. This is the same library that we use internally, and it is regularly updated. The newest version can always be found at <b>www.microBuilder.eu</b>. If you find this library useful, please feel free to purchase something from our online store. Please also note that all holes are optimised for metric drill bits!</p> + +<h3>Obligatory Warning</h3> +<p>While it probably goes without saying, there are no guarantees that the footprints or schematic symbols in this library are flawless, and we make no promises of fitness for production, prototyping or any other purpose. These libraries are provided for information puposes only, and are used at your own discretion. While we make every effort to produce accurate footprints, and many of the items found in this library have be proven in production, we can't make any promises of suitability for a specific purpose. If you do find any errors, though, please feel free to contact us at www.microbuilder.eu to let us know about it so that we can update the library accordingly!</p> + +<h3>License</h3> +<p>This work is placed in the public domain, and may be freely used for commercial and non-commercial work with the following conditions:</p> +<p>THIS SOFTWARE IS PROVIDED ''AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +</p> + + +0603-Mini +<p>Mini footprint for dense boards</p> + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b> 0402</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>0402 MicroPitch<p> + + + + + +>NAME +>VALUE + + + + + +<b>0603</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>0603 MicroPitch</b> + + + + + +>NAME +>VALUE + + + + + +<b>0805</b> + + + + + + + + +>NAME +>VALUE + + + + + +<b>0805 MicroPitch</b> + + + + + +>NAME +>VALUE + + + + + + + + + +>NAME +>VALUE + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<b>RESISTOR 2512 (Metric 6432)</b> + + + + + + + + +>NAME +>VALUE + + + + + + + + + + + +>NAME +>VALUE + + + + + + +<p><b>Resistors</b></p> +<p>For new designs, use the packages preceded by an '_' character since they are more reliable:</p> +<p>The following footprints should be used on most boards:</p> +<ul> +<li><b>_0402</b> - Standard footprint for regular board layouts</li> +<li><b>_0603</b> - Standard footprint for regular board layouts</li> +<li><b>_0805</b> - Standard footprint for regular board layouts</li> +<li><b>_1206</b> - Standard footprint for regular board layouts</li> +</ul> +<p>For extremely tight-pitch boards where space is at a premium, the following 'micro-pitch' footprints can be used (smaller pads, no silkscreen outline, etc.):</p> +<ul> +<li><b>_0402MP</b> - Micro-pitch footprint for very dense/compact boards</li> +<li><b>_0603MP</b> - Micro-pitch footprint for very dense/compact boards</li> +<li><b>_0805MP</b> - Micro-pitch footprint for very dense/compact boards</li> +<li><b>_1206MP</b> - Micro-pitch footprint for very dense/compact boards</li> +</ul> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<b>Supply Symbols</b><p> + GND, VCC, 0V, +5V, -5V, etc.<p> + Please keep in mind, that these devices are necessary for the + automatic wiring of the supply signals.<p> + The pin name defined in the symbol is identical to the net which is to be wired automatically.<p> + In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p> + <author>Created by librarian@cadsoft.de</author> + + + + + +>VALUE + + + + + +>VALUE + + + + + +<b>SUPPLY SYMBOL</b> + + + + + + + + + + + + +<b>SUPPLY SYMBOL</b> + + + + + + + + + + + + + + +<b>Test Pins/Pads</b><p> +Cream on SMD OFF.<br> +new: Attribute TP_SIGNAL_NAME<br> +<author>Created by librarian@cadsoft.de</author> + + +<b>TEST PAD</b> + + + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + + + + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + + +>NAME +>VALUE +>TP_SIGNAL_NAME + + + +<b>TEST PAD</b> + + +>NAME +>VALUE +>TP_SIGNAL_NAME + + + +<b>TEST PAD</b> + + +>NAME +>VALUE +>TP_SIGNAL_NAME + + + +<b>TEST PAD</b> + + +>NAME +>VALUE +>TP_SIGNAL_NAME + + + +<b>TEST PAD</b> + + +>NAME +>VALUE +>TP_SIGNAL_NAME + + + +<b>TEST PAD</b> + + +>NAME +>VALUE +>TP_SIGNAL_NAME + + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + +<b>TEST PAD</b> + +>NAME +>VALUE +>TP_SIGNAL_NAME + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + +TEST PAD + + + + + + + + + + + +>NAME +>TP_SIGNAL_NAME + + + + + +<b>Test pad</b> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Since Version 6.2.2 text objects can contain more than one line, +which will not be processed correctly with this version. + + +Since Version 8.2, EAGLE supports online libraries. The ids +of those online libraries will not be understood (or retained) +with this version. + + +Since Version 8.3, EAGLE supports URNs for individual library +assets (packages, symbols, and devices). The URNs of those assets +will not be understood (or retained) with this version. + + +Since Version 8.3, EAGLE supports the association of 3D packages +with devices in libraries, schematics, and board files. Those 3D +packages will not be understood (or retained) with this version. + + +