* Sensor Watch Pro board definition
* Disable hot-plugging on SWCLK
* Add rainbow test
* Move interrupt mapping to board config
* New color definition for Pro boards in makefile
This makes movement_play_signal synchronous when in LE mode, despite
using the underlying asynchronous API. It's a bit of a hack, but it
should work well enough for now.
This also moves the enabling/disabling of the buzzer into the
movement_play_signal function, so that watch faces no longer have to do
it.
* Introduce shell module for basic serial shell with argument parsing
* Introduce shell_cmd_list module for basic compile-time command
registration
* Harden USB handling to hang less and drop fewer inputs
- Service tud_task() with periodic TC0 timer interrupt
- Service cdc_task() with periodic TC1 timer interrupt
- Handle shell servicing in main app loop
- Add a circular buffering layer for reads/writes
* Change newline prints to also send carriage return
* Refactor filesystem commands for shell subsystem
* Introduce new shell commands:
- 'help' command
- 'flash' command to reset into bootloader
- 'stress' command to stress CDC writes
Testing:
* Shell validated on Sensor Watch Blue w/ Linux host
* Shell validated in emscripten emulator
* Tuned by spamming inputs during `stress` cmd until stack didn't crash
* initial commit, added opt3001 light meter test app
* tested working light meter board, i2c communication still has issues
* fixed i2c; rudimentary lightmeter works!
* added aperture priority ui
* added aperture priority ui
* added README
* adjusted cal
* fixed bugs (HI shutter speed, lux mode toggle)
* made it possible to advance to the next face
* initialized lux variable
* lowered tolerance for HI and LO
* Changed EV display from always showing EV100 to showing EV[iso setting]
* dont display old ev when ISO changes
* changed mode and light behavior
* updated readme
* fixed indentation
* made lightmeter display logic more consistent
* made lightmeter display logic more consistent
* reverted rules.mk (for merge into upstream)
* reverted rules.mk (for merge into upstream)
* removed OPT3001 PCB model
* made lux mode default, corrected timeout behavior
---------
Co-authored-by: Christian Chapman <user@debian>
* buzzer sequences: first draft, does not work on hardware yet (but in simulator)
* buzzer sequences: add changes to movement.c
* buzzer sequences: add demo face to Makefile
* buzzer sequences: fix problem of interrupted sounds. Add logic for repeating sub sequences. Tidy up (move logic to watch_buzzer files, remove buzzer_demo_face)
* buzzer sequences: tidy up even more
* buzzer sequences: disable registering a 32 Hz tick callback for watch faces, so it will be used exclusively by the buzzer sequences functionality
* buzzer sequences: add callback slot functionality to watch_rtc and make watch_buzzer use it. Switch internal buzzer sequences tick frequency to 64 Hz. Revert changes to movement.c
* buzzer sequences: fix parameter sanity check in watch_rtc code
* buzzer sequences/watch_rtc: optimize calling tick callbacks in RTC_Handler
* buzzer sequences/watch_rtc: fix error in calling callback functions
* buzzer sequences: revert changes to watch_rtc logic. Instead, use TC3 as the source for timing the sound sequences.
* buzzer sequences: fix frequency of callback
* buzzer sequences: integrate changes from PR #162 (set both CCBUF and PERFBUF for correct buzzer tone)
* Intermediate changes
* Databank working
* Main commit for precision timing
First version where all functions are supposed to be working
* Fix math error in nanosec. File storage for location.
* Remove obsolete comments
* Missing page name on pages rotation - thanks to jeremy
* Delete file.diff
* Cleanup+tempchart
1) finetune must always reset last calibration time when doing non-0 time correction, even when you are not applying ppm correction.
2) Dithers over 31 periods not 10, more resolution with still no risk of overflow
3) Minute-boundery finetune fix. I also just got this 1-minute error after finetune...
4) Write frequency calibration value in 1 operation rather than 2. All RTC writes must be single operations to avoid partially correct data.
5) Some code cleanup
6) Tempchart face is added for temperature statistics
* Update set_time_hackwatch_face.c
* Math error in display code of finetune, allow to update correction time even without correction - by long alarm press
* Increase reliability of stopping & starting RTC timer
As it's quite dangerous operation
* hackwatch - days adjust down fix by long alarm
* unify style
* More comments & last style change
* Simulator support
RTC operations (watch_rtc_enable and watch_rtc_freqcorr_write) are in common libs.
* Unicode fix
* Crystal aging is now adjustable (AA page in nanosec - annual aging, ppm/year)
Aging is baked into fixed offset every time finetune is performed, as it relies on last adjustment time.
* Blink on non-0 page every minute in finetune to measure clock error
* Rolling back private changes
* Cleanup
* Cleanup
* Quality of life changes in nanosec
1. Does not calculate & apply ppm correction if less than 6 hours passed since previous adjustment (as it gives very high correction values which are unrealistic and unhelpful)
2. Idle timeout resets to face 0 only if no correction was made
* unify style
* Fix low-power errors in nanosec infrastructure, faster display in finetune
* Merge fix
* unify style
Co-authored-by: Jeremy O'Brien <neutral@fastmail.com>
Co-authored-by: joeycastillo <joeycastillo@utexas.edu>
