Enhances 24 hour only mode by setting defaults properly
and skipping past the 12/24 hour settings page in the
preferences watch face.
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/417
Takes zero into account, allowing the sunrise/sunset watch face
to work with no presets defined.
Also resolves a warning during compilation of the sunrise/sunset face.
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/428
Improves handling of months in the Sensor Watch
by computing whether the given year is a leap year.
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/434
July has 31 days and but was set to 30 days in the Sensor Watch.
This patch fixes the discrepancy.
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/431
Avoid potential underflow when evaluating x - y with y > x.
Evaluate it only when y <= x instead.
Avoid clearing indicators in background task
since another watch face is likely active.
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/440
Mechanical switches exhibit temporary voltage fluctuations
when electrical contact is made, which manifest as "bouncing"
between the logical high and low states. Sampling the switch's
state during this period of stability produces invalid results.
The switch must be debounced by ignoring the generated interrupts
until the switch's state has stabilized. This is implemented by delaying
the input events until an empirically determined time has elapsed.
As such this pull request introduces customizable high resolution timers
for debouncing button down and up events.
This software debouncing unfortunately increases the sensor watch's
input latency. This is an acceptable tradeoff due to better usability:
watch faces which require holding down buttons such as the pulsometer
should work much more reliably after this patch.
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
Tested-on-hardware-by: Krzysztof Gałka <@kshysztof@Discord>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/437
References: https://en.wikipedia.org/wiki/Switch#Contact_bounce
Adds the ability to configure at compilation time
the movement's default birth date and location.
Tested-by: madhogs <madhogs@protonmail.com>
Tested-by: Niehztog <niehztog@gmail.com>
Tested-on-hardware-by: madhogs <madhogs@protonmail.com>
Tested-on-hardware-by: Niehztog <niehztog@gmail.com>
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/387
The movement was checking for scheduled tasks
by comparing for equality their scheduled times to
the current time. However, it is possible that the time
has moved past the scheduled time by the time the
function executes, leading to scheduled tasks not
being executed and therefore to missed deadlines.
Changing it to `<=` fixes the problem by taking that
possibility into account.
Helped-by: Wesley Ellis <tahnok@gmail.com>
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/439
The TOTP face header file documentation contained outdated instructions
for configuring the complication with TOTP credentials. This PR updates
the documentation to match what is expected in `totp_face.c`.
To allow a valid date to be set the `set_time_face` cycles through the
valid days for a given month. July was incorrectly encoded as having 30
days (it has 31!)
* Holding light button on a non-element screen will turn on the light.
* The alarm and led button press moves back to the currently-selected element symbol page rather than the next and previous one
* Usage update
* Added subscreens to periodic table face; added title and faster scrolling
* Resized buf for element display
* Fixed scrolling to work on actual hardware
* Added delay before _loop_text at title and bugfix on elements shorter than 6 char
* Title screen displays when le_mode starts
* Added documentation on usage and removed unneeded variable
This makes it possible to do a bunch of things without
having to keep touching the light button.
I don't really see any downside with this. If you want
the light to go off, just stop touching buttons.
* Check that color is valid
Instead of merely checking that COLOR is set, check that it is one of
RED, BLUE or GREEN
* Added ability to turn off sound and timer with modes
* Added enum for mode
---------
Co-authored-by: Wesley Ellis <tahnok@gmail.com>
Fixes a division by zero bug caused by calling getCodeFromTimestamp
without having initialized the TOTP library with a secret first.
This was happening because the face calls totp_display on activation,
meaning the validity of the secret was not checked since this is
done in the generate function.
Now the validity of the key is determined solely by the size
of the current decoded key. A general display function checks it
and decides whether to display the code or just the error message.
The size of the current decoded key is initialized to zero
on watch face activation, ensuring fail safe operation.
Tested-by: Matheus Afonso Martins Moreira <matheus.a.m.moreira@gmail.com>
Tested-on-hardware-by: madhogs <59648482+madhogs@users.noreply.github.com>
Signed-off-by: Matheus Afonso Martins Moreira <matheus.a.m.moreira@gmail.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/385
Forgot to call watch_display_string on the error message.
Of course the message isn't going to be displayed.
Also, increase the buffer size to 10 characters
and output a space to the last position.
This ensures the segments are cleared.
Tested-by: Matheus Afonso Martins Moreira <matheus.a.m.moreira@gmail.com>
Tested-on-hardware-by: madhogs <59648482+madhogs@users.noreply.github.com>
Signed-off-by: Matheus Afonso Martins Moreira <matheus.a.m.moreira@gmail.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/385
Allocate an unlimited extent 128 byte buffer once during setup
instead of allocating and deallocating repeatedly. A static buffer
was not used because it fails to be reentrant and prevents multiple
instances of the watch face to be compiled by the user.
The advantage is the complete prevention of memory management errors,
improving the reliability of the watch. It also eliminates the overhead
of the memory allocator itself since malloc is not free.
The disadvantage is a worst case default size of 128 bytes was required,
meaning about 90 bytes will be wasted in the common case since most keys
are not that big. This can be overridden by the user via preprocessor.
The key lengths are checked on TOTP watch face initialization
and if any key is found to be too large to fit the buffer
it is turned off and the label and ERROR is displayed instead.
The base32 encoded secrets are decoded dynamically to the buffer
at the following times:
- Face enters the foreground
- User switches TOTP code
Therefore, there is still some extra runtime overhead
that can still be eliminated by code generation.
This will be addressed in future commits.
Tested-by: Matheus Afonso Martins Moreira <matheus.a.m.moreira@gmail.com>
Tested-on-hardware-by: madhogs <59648482+madhogs@users.noreply.github.com>
Signed-off-by: Matheus Afonso Martins Moreira <matheus.a.m.moreira@gmail.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/385
The TOTP face is working in the simulator but fails on the real hardware
when loaded with lots of codes, just like the LFS version.
This is likely caused by the recent refactoring of the TOTP face
which introduced a declarative credential interface for ease of use.
That's accomplished by decoding the secrets at runtime which increases
the RAM requirements. Users are likely hitting memory limits.
In order to mitigate this, the algorithm is changed from decoding
all of the secrets only once during initialization to on the fly
decoding of the secret for the current TOTP credential only.
This converts this face's dynamic memory usage from O(N) to O(1)
at the cost of memory management when switching faces and credentials
which could impact power consumption. Issue is confirmed fixed by
author of issue who has tested it on real hardware. Fixes#384.
Due to variable key sizes, the memory cannot be statically allocated.
Perhaps there's a maximum key size that can serve as worst case?
Also took this opportunity to restructure the code a bit.
Also added code to check for memory allocation failure.
Reported-by: madhogs <59648482+madhogs@users.noreply.github.com>
Fixed-by: Matheus Afonso Martins Moreira <matheus.a.m.moreira@gmail.com>
Tested-by: Matheus Afonso Martins Moreira <matheus.a.m.moreira@gmail.com>
Tested-on-hardware-by: madhogs <59648482+madhogs@users.noreply.github.com>
Signed-off-by: Matheus Afonso Martins Moreira <matheus.a.m.moreira@gmail.com>
GitHub-Issue: https://github.com/joeycastillo/Sensor-Watch/issues/384
Currently, movement drops timeout events in case the previous loop
indicates that sleep is not possible. This is due to unintended
short circuiting behavior of && and is fixed with a temporary variable.
The static qualifier of can_sleep is also removed.
Helped-by: Alex Maestas <git@se30.xyz>
Tested-by: Matheus Afonso Martins Moreira <matheus.a.m.moreira@gmail.com>
Tested-on-hardware-by: Matheus Afonso Martins Moreira <matheus.a.m.moreira@gmail.com>
Signed-off-by: Matheus Afonso Martins Moreira <matheus.a.m.moreira@gmail.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/376
Aggregates the TOTP credentials into a data structure,
making it easier to define and use the credentials.
Also incorporate backwards movement code from another branch.
Co-authored-by: Max Zettlmeißl <max@zettlmeissl.de>
Tested-by: Matheus Afonso Martins Moreira <matheus.a.m.moreira@gmail.com>
Tested-on-hardware-by: Matheus Afonso Martins Moreira <matheus.a.m.moreira@gmail.com>
Signed-off-by: Matheus Afonso Martins Moreira <matheus.a.m.moreira@gmail.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/369
GitHub-Related-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/356
Implements an advanced pulsometer that can be calibrated by the user.
Also features a streamlined and responsive user interface,
new documentation and generally improved code.
Tested-by: Matheus Afonso Martins Moreira <matheus.a.m.moreira@gmail.com>
Tested-on-hardware-by: Matheus Afonso Martins Moreira <matheus.a.m.moreira@gmail.com>
Signed-off-by: Matheus Afonso Martins Moreira <matheus.a.m.moreira@gmail.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/371
Completely refactors the simple clock face
and lays the foundations for new features.
Also adds a compile time 24 hour mode only feature.
Tested-by: Matheus Afonso Martins Moreira <matheus.a.m.moreira@gmail.com>
Tested-on-hardware-by: Matheus Afonso Martins Moreira <matheus.a.m.moreira@gmail.com>
Signed-off-by: Matheus Afonso Martins Moreira <matheus.a.m.moreira@gmail.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/373
Makes a long press of the ALARM button reset the face to current day.
Reviewed-by: Matheus Afonso Martins Moreira <matheus.a.m.moreira@gmail.com>
Tested-by: Wesley Aptekar-Cassels <me@wesleyac.com>
Tested-by: Matheus Afonso Martins Moreira <matheus.a.m.moreira@gmail.com>
Tested-on-hardware-by: Matheus Afonso Martins Moreira <matheus.a.m.moreira@gmail.com>
Signed-off-by: Matheus Afonso Martins Moreira <matheus.a.m.moreira@gmail.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/316
Adds overridable C preprocessor definitions for every user preference.
Enables the user to set defaults and omit the preferences face.
The default behavior of the watch is preserved.
Suggested-by: Wesley Aptekar-Cassels <me@wesleyac.com>
Implemented-by: madhogs <x3dh4vhf@duck.com>
Reviewed-by: Matheus Afonso Martins Moreira <matheus.a.m.moreira@gmail.com>
Tested-by: Matheus Afonso Martins Moreira <matheus.a.m.moreira@gmail.com>
Tested-on-hardware-by: Matheus Afonso Martins Moreira <matheus.a.m.moreira@gmail.com>
Signed-off-by: Matheus Afonso Martins Moreira <matheus.a.m.moreira@gmail.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/295
GitHub-Related-Issue: https://github.com/joeycastillo/Sensor-Watch/issues/291
Currently, movement drops time out events in case the previous loop
indicates that sleep is not possible due to short circuiting behavior
of logical and in C: if the left-hand side is false, the right hand
side is not evaluated at all, which means the loop is not called.
This was not intended to happen.
Fix it by storing the result in a second boolean variable
and working out the logic after the fact.
Avoid resetting it to zero when the face is activated.
Initialize the variables once when the face is first set up.
This makes it remember the last measurement taken by the user.
It will no longer be overwritten when the watch face activates.
Avoid resetting it to default when the face is activated.
Set the default pulsometer calibration once,
only when the face is first set up.
This makes it remember the calibration set by the user.
It will no longer overwrite it.
Update the copyrights to include full name attribution
to Max Zettlmeißl whose code I've incorporated and who
has explicitly licensed it as MIT.
Max Zettlmeißl (@maxz) commented on 2024-01-20:
> I provide all my changes under the MIT license
GitHub-Comment: https://github.com/joeycastillo/Sensor-Watch/pull/356#issuecomment-1902114306
Adds the ability to cycle back to the previous credential with LIGHT.
Long pressing LIGHT activates the LED.
Co-authored-by: Matheus Afonso Martins Moreira <matheus.a.m.moreira@gmail.com>
The clock watch face can now be configured at build time
to only display the time in 24h mode. Also enabled in forced 24h mode.
This should result in smaller code size due to dead code elimination.
Update the copyrights to include full name attribution to all
who contributed to the clock watch face, including myself.
Also add an SPDX license identifier header comment to the files.
This allows the user to easily copy the base32 encoded secrets
into the TOTP record initializers. They will be decoded once
at runtime when the face is being set up by the movement framework.
Also rename the array of TOTP records to credentials. Much better.
