* buzzer sequences: first draft, does not work on hardware yet (but in simulator)
* buzzer sequences: add changes to movement.c
* buzzer sequences: add demo face to Makefile
* buzzer sequences: fix problem of interrupted sounds. Add logic for repeating sub sequences. Tidy up (move logic to watch_buzzer files, remove buzzer_demo_face)
* buzzer sequences: tidy up even more
* buzzer sequences: disable registering a 32 Hz tick callback for watch faces, so it will be used exclusively by the buzzer sequences functionality
* buzzer sequences: add callback slot functionality to watch_rtc and make watch_buzzer use it. Switch internal buzzer sequences tick frequency to 64 Hz. Revert changes to movement.c
* buzzer sequences: fix parameter sanity check in watch_rtc code
* buzzer sequences/watch_rtc: optimize calling tick callbacks in RTC_Handler
* buzzer sequences/watch_rtc: fix error in calling callback functions
* buzzer sequences: revert changes to watch_rtc logic. Instead, use TC3 as the source for timing the sound sequences.
* buzzer sequences: fix frequency of callback
* buzzer sequences: integrate changes from PR #162 (set both CCBUF and PERFBUF for correct buzzer tone)
* Intermediate changes
* Databank working
* Main commit for precision timing
First version where all functions are supposed to be working
* Fix math error in nanosec. File storage for location.
* Remove obsolete comments
* Missing page name on pages rotation - thanks to jeremy
* Delete file.diff
* Cleanup+tempchart
1) finetune must always reset last calibration time when doing non-0 time correction, even when you are not applying ppm correction.
2) Dithers over 31 periods not 10, more resolution with still no risk of overflow
3) Minute-boundery finetune fix. I also just got this 1-minute error after finetune...
4) Write frequency calibration value in 1 operation rather than 2. All RTC writes must be single operations to avoid partially correct data.
5) Some code cleanup
6) Tempchart face is added for temperature statistics
* Update set_time_hackwatch_face.c
* Math error in display code of finetune, allow to update correction time even without correction - by long alarm press
* Increase reliability of stopping & starting RTC timer
As it's quite dangerous operation
* hackwatch - days adjust down fix by long alarm
* unify style
* More comments & last style change
* Simulator support
RTC operations (watch_rtc_enable and watch_rtc_freqcorr_write) are in common libs.
* Unicode fix
* Crystal aging is now adjustable (AA page in nanosec - annual aging, ppm/year)
Aging is baked into fixed offset every time finetune is performed, as it relies on last adjustment time.
* Blink on non-0 page every minute in finetune to measure clock error
* Rolling back private changes
* Cleanup
* Cleanup
* Quality of life changes in nanosec
1. Does not calculate & apply ppm correction if less than 6 hours passed since previous adjustment (as it gives very high correction values which are unrealistic and unhelpful)
2. Idle timeout resets to face 0 only if no correction was made
* unify style
* Fix low-power errors in nanosec infrastructure, faster display in finetune
* Merge fix
* unify style
Co-authored-by: Jeremy O'Brien <neutral@fastmail.com>
Co-authored-by: joeycastillo <joeycastillo@utexas.edu>
I noticed that the bicolor led isn't supported in the simulator. Here is a quick mockup of how I would add support for it.
I added an SVG filter to the #light rectangle in the SVG which lets us multiply the colours by a matrix in code. I then insert values so that the original green colour gets mixed into the combination of red and green requested by `watch_set_led_color`
# Testing
So far I've only tested this with the standard firmware build but it seems to work.
# Possible issues
I wasn't 100% sure what to do when red + green > 255, current behaviour is that it gets clamped to 255 in the simulator.
* Put something on screen
* Use the 32bit watch_date_time repr to pass from JS
* Implement periodic callbacks
* Clear display on enabling
* Hook up watch_set_led_color() to SVG (green-only)
* Make debug output full-width
* Remove default Emscripten canvas
* Implement sleep and button clicks
* Fix time zone conversion bug in beats-time app
* Clean up warnings
* Fix pin levels
* Set time zone to browser value (if available)
* Add basic backup data saving
* Silence format specifier warnings in both targets
* Remove unnecessary, copied files
* Use RTC pointer to clear callbacks (if available)
* Use preprocessor define to avoid hardcoding MOVEMENT_NUM_FACES
* Change each face to const preprocessor definition
* Remove Intl.DateTimeFormat usage
* Update shell.html title, header
* Add touch start/end event handlers on SVG buttons
* Update shell.html
* Update folder structure (shared, simulator, hardware under watch-library)
* Tease out shared components from watch_slcd
* Clean up simulator watch_slcd.c inline JS calls
* Fix missing newlines at end of file
* Add simulator warnings (except format, unused-paremter)
* Implement remaining watch_rtc functions
* Fix button bug on mouse down then drag out
* Implement remaining watch_slcd functions
* Link keyboard events to buttons (for keys A, L, M)
* Rewrite event handling (mouse, touch, keyboard) in C
* Set explicit text UTF-8 charset in shell.html
* Address PR comments
* Remove unused directories from include paths
