The DST code has not yet been fully tested, the upcoming movement
refactor is upon us and it will integrate with the micro timezone
library anyway. Revert it so that next can be merged into main.
This reverts commit 5a8a49a8c7, reversing
changes made to bfadb81e82.
The DST code has not yet been fully tested, the upcoming movement
refactor is upon us and it will integrate with the micro timezone
library anyway. Revert it so that next can be merged into main.
This reverts commit 3c86a42aa8, reversing
changes made to be969c4deb.
The DST code has not yet been fully tested, the upcoming movement
refactor is upon us and it will integrate with the micro timezone
library anyway. Revert it so that next can be merged into main.
This reverts commit ac5bf8cfce, reversing
changes made to 5a8a49a8c7.
The DST code has not yet been fully tested, the upcoming movement
refactor is upon us and it will integrate with the micro timezone
library anyway. Revert it so that next can be merged into main.
This reverts commit 0cc28b9811, reversing
changes made to 337864eb54.
There was an issue where the clock's display would remain in 024h mode
even after switching back to 12h/24h mode because it only took into
account the leading zero bit, whose value is meaningless unless the
24h mode bit is also set.
The issue is fixed by taking both bits into account.
Closes#476.
Reported-by: CarpeNoctem <cryptomax@pm.me>
GitHub-Issue: https://github.com/joeycastillo/Sensor-Watch/issues/476
There was an issue where the simple clock's display would remain in
024h mode even after switching back to 12h/24h mode because it only
took into account the leading zero bit, whose value is meaningless
unless the 24h mode bit is also set.
The issue is fixed by taking both bits into account.
Closes#476.
Reported-by: CarpeNoctem <cryptomax@pm.me>
GitHub-Issue: https://github.com/joeycastillo/Sensor-Watch/issues/476
The watch was not indicating to the user that it was in 24h mode
when set to the leading zero 024h time format. This could lead
to ambiguity and confusion, so make sure to indicate 24h mode.
Closes#476.
Reported-by: CarpeNoctem <cryptomax@pm.me>
GitHub-Issue: https://github.com/joeycastillo/Sensor-Watch/issues/476
The new DST changes caused problems in one specific face - world_clock2.
An incorrect variable was used due to a confusing name.
It has been revised to fix the problems that were caused.
Closes#475.
Reported-by: CarpeNoctem <cryptomax@pm.me>
Fixed-by: David Volovskiy <devolov@gmail.com>
Tested-by: CarpeNoctem <cryptomax@pm.me>
Tested-on-hardware-by: CarpeNoctem <cryptomax@pm.me>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/470
GitHub-Issue: https://github.com/joeycastillo/Sensor-Watch/issues/475
Adds the ability to tally negative counts, tally quickly by holding down
the buttons as well as the ability to enable and cycle through multiple
preset initial values for numerous contexts such as card games.
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/430
Creates a macro that returns the size of the presets array,
converting it into a compile time constant value that occupies
no memory and that compilers can constant fold into other expressions
potentially leading to dead code elimination.
Fix issue where the calculator face's user interface display
was delayed about a quarter second due to the activation event
being a no-op.
Tested-by: David Volovskiy <devolov@gmail.com>
Reported-by: David Volovskiy <devolov@gmail.com>
Fixed-by: David Volovskiy <devolov@gmail.com>
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/454
Implements logic to automatically offset daylight saving time settings
when calculating timezone offsets. This should make the DST functions
work automatically with no need for user input in most cases.
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/470
Adds a toggle in the preferences face that allows the user
to enable or disable the daylight savings time.
Should help produce the correct results with the sunrise/sunset presets.
A proper solution would be to integrate the tzinfo database
but it's too big for the watch at the time of this writing.
Can't be done unless it can be shrunk down into a subset
the user would be interested. Even then it's a stopgap
since the database is likely to keep growing over time.
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/268
Displays the time in a "close enough" manner:
periods of five minutes, relative to the nearest hour.
For example:
- 3:24 -> 25 past 3
- 3:50 -> 10 to 4
- 3:59 -> 4 o'clock
- 1:35 -> 35 past 1
- 1:50 -> 10 to 2
- 2:00 -> 2 o'clock
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
Tested-on-hardware-by: Ruben Nic <RubenSandwich@users.noreply.github.com>
Tested-on-hardware-by: KlingonJane <148595159+KlingonJane@users.noreply.github.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/401
Measures the temperature until it stabilizes for half a minute.
This watch face is not meant to diagnose, treat, cure or prevent
any disease.
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/413
Adds a watch face that allows playing the classic Simon game
with the watch's buzzer and RGB LED.
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/398
Adds a french revolutionary time watch face which displays the time
divided into ten hours of one hundred minutes each which are in turn
divided into one hundred seconds each.
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
Reviewed-by: Wesley Aptekar-Cassels <me@wesleyac.com>
Reviewed-by: Alex Maestas <git@se30.xyz>
Tested-on-hardware-by: CarpeNoctem <cryptomax@pm.me>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/269
Adds a watch face that implements a game where the player
must guess if the next card will be higher or lower than
the last cards that have been revealed.
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
Tested-on-hardware-by: Chris <chris.ellis.git.dev@gmail.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/259
Adds a timing watch face that focuses on
keeping track of specific deadlines.
Dates and times can be set on the watch face
and it will display the time remaining at ever
decreasing levels of granularity for the sake
of brevity and ease of understanding.
For example, it will display years and months if over a year is left,
months and days if less than one year is left,
days and hours if less than one month is left
and the full remaining time if less than a day is left.
It also notifies the user when a deadline has passed recently.
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
Tested-on-hardware-by: Konrad Rieck <konrad@mlsec.org>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/266
The alarm for deadlines is now handled via a background task. Instead of a scheduled task that prevents sleep mode, the face checks in the background every minute whether an deadline is due. If this is the case, the face wakes up from sleep mode and starts a scheduled task for the remaining seconds.
- A background task is only scheduled if the alarm option is activated. If the option is enabled, an alarm sounds when the next deadline is reached. If the option is disabled, no alarm sounds and the watch can enter low energy sleep.
- Fixed tick frequency error. During running mode, the clock ticks at 1Hz. This is set in the init function `_running_init` and thus ensures that we do not run too fast when returning from the setting mode.
- Minor corrections to comments and indentations.
Adds a watch face full of useful information
about every known chemical element.
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
Tested-on-hardware-by: PrimmR <primmr@icloud.com>
Tested-on-hardware-by: David Volovskiy <devolov@gmail.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/423
