sensor-watch/movement/watch_faces/clock/clock_face.c
Matheus Afonso Martins Moreira ea5efb4d82 faces/clock: clear segments if not in 024h mode
There was an issue where the clock's display would remain in 024h mode
even after switching back to 12h/24h mode because it only took into
account the leading zero bit, whose value is meaningless unless the
24h mode bit is also set.

The issue is fixed by taking both bits into account.

Closes #476.

Reported-by: CarpeNoctem <cryptomax@pm.me>
GitHub-Issue: https://github.com/joeycastillo/Sensor-Watch/issues/476
2024-09-16 15:54:09 -03:00

295 lines
9 KiB
C

/* SPDX-License-Identifier: MIT */
/*
* MIT License
*
* Copyright © 2021-2023 Joey Castillo <joeycastillo@utexas.edu> <jose.castillo@gmail.com>
* Copyright © 2022 David Keck <davidskeck@users.noreply.github.com>
* Copyright © 2022 TheOnePerson <a.nebinger@web.de>
* Copyright © 2023 Jeremy O'Brien <neutral@fastmail.com>
* Copyright © 2023 Mikhail Svarichevsky <3@14.by>
* Copyright © 2023 Wesley Aptekar-Cassels <me@wesleyac.com>
* Copyright © 2024 Matheus Afonso Martins Moreira <matheus.a.m.moreira@gmail.com>
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include <stdlib.h>
#include "clock_face.h"
#include "watch.h"
#include "watch_utility.h"
#include "watch_private_display.h"
// 2.2 volts will happen when the battery has maybe 5-10% remaining?
// we can refine this later.
#ifndef CLOCK_FACE_LOW_BATTERY_VOLTAGE_THRESHOLD
#define CLOCK_FACE_LOW_BATTERY_VOLTAGE_THRESHOLD 2200
#endif
typedef struct {
struct {
watch_date_time previous;
} date_time;
uint8_t last_battery_check;
uint8_t watch_face_index;
bool time_signal_enabled;
bool battery_low;
} clock_state_t;
static bool clock_is_in_24h_mode(movement_settings_t *settings) {
#ifdef CLOCK_FACE_24H_ONLY
return true;
#else
return settings->bit.clock_mode_24h;
#endif
}
static bool clock_should_set_leading_zero(movement_settings_t *settings) {
return clock_is_in_24h_mode(settings) && settings->bit.clock_24h_leading_zero;
}
static void clock_indicate(WatchIndicatorSegment indicator, bool on) {
if (on) {
watch_set_indicator(indicator);
} else {
watch_clear_indicator(indicator);
}
}
static void clock_indicate_alarm(movement_settings_t *settings) {
clock_indicate(WATCH_INDICATOR_SIGNAL, settings->bit.alarm_enabled);
}
static void clock_indicate_time_signal(clock_state_t *clock) {
clock_indicate(WATCH_INDICATOR_BELL, clock->time_signal_enabled);
}
static void clock_indicate_24h(movement_settings_t *settings) {
clock_indicate(WATCH_INDICATOR_24H, clock_is_in_24h_mode(settings));
}
static bool clock_is_pm(watch_date_time date_time) {
return date_time.unit.hour >= 12;
}
static void clock_indicate_pm(movement_settings_t *settings, watch_date_time date_time) {
if (settings->bit.clock_mode_24h) { return; }
clock_indicate(WATCH_INDICATOR_PM, clock_is_pm(date_time));
}
static void clock_indicate_low_available_power(clock_state_t *clock) {
// Set the LAP indicator if battery power is low
clock_indicate(WATCH_INDICATOR_LAP, clock->battery_low);
}
static watch_date_time clock_24h_to_12h(watch_date_time date_time) {
date_time.unit.hour %= 12;
if (date_time.unit.hour == 0) {
date_time.unit.hour = 12;
}
return date_time;
}
static void clock_check_battery_periodically(clock_state_t *clock, watch_date_time date_time) {
// check the battery voltage once a day
if (date_time.unit.day == clock->last_battery_check) { return; }
clock->last_battery_check = date_time.unit.day;
watch_enable_adc();
uint16_t voltage = watch_get_vcc_voltage();
watch_disable_adc();
clock->battery_low = voltage < CLOCK_FACE_LOW_BATTERY_VOLTAGE_THRESHOLD;
clock_indicate_low_available_power(clock);
}
static void clock_toggle_time_signal(clock_state_t *clock) {
clock->time_signal_enabled = !clock->time_signal_enabled;
clock_indicate_time_signal(clock);
}
static void clock_display_all(watch_date_time date_time, bool leading_zero) {
char buf[10 + 1];
snprintf(
buf,
sizeof(buf),
leading_zero? "%s%02d%02d%02d%02d" : "%s%2d%2d%02d%02d",
watch_utility_get_weekday(date_time),
date_time.unit.day,
date_time.unit.hour,
date_time.unit.minute,
date_time.unit.second
);
watch_display_string(buf, 0);
}
static bool clock_display_some(watch_date_time current, watch_date_time previous) {
if ((current.reg >> 6) == (previous.reg >> 6)) {
// everything before seconds is the same, don't waste cycles setting those segments.
watch_display_character_lp_seconds('0' + current.unit.second / 10, 8);
watch_display_character_lp_seconds('0' + current.unit.second % 10, 9);
return true;
} else if ((current.reg >> 12) == (previous.reg >> 12)) {
// everything before minutes is the same.
char buf[4 + 1];
snprintf(
buf,
sizeof(buf),
"%02d%02d",
current.unit.minute,
current.unit.second
);
watch_display_string(buf, 6);
return true;
} else {
// other stuff changed; let's do it all.
return false;
}
}
static void clock_display_clock(movement_settings_t *settings, clock_state_t *clock, watch_date_time current) {
if (!clock_display_some(current, clock->date_time.previous)) {
if (!clock_is_in_24h_mode(settings)) {
// if we are in 12 hour mode, do some cleanup.
clock_indicate_pm(settings, current);
current = clock_24h_to_12h(current);
}
clock_display_all(current, clock_should_set_leading_zero(settings));
}
}
static void clock_display_low_energy(watch_date_time date_time) {
char buf[10 + 1];
snprintf(
buf,
sizeof(buf),
"%s%2d%2d%02d ",
watch_utility_get_weekday(date_time),
date_time.unit.day,
date_time.unit.hour,
date_time.unit.minute
);
watch_display_string(buf, 0);
}
static void clock_start_tick_tock_animation(void) {
if (!watch_tick_animation_is_running()) {
watch_start_tick_animation(500);
}
}
static void clock_stop_tick_tock_animation(void) {
if (watch_tick_animation_is_running()) {
watch_stop_tick_animation();
}
}
void clock_face_setup(movement_settings_t *settings, uint8_t watch_face_index, void ** context_ptr) {
(void) settings;
(void) watch_face_index;
if (*context_ptr == NULL) {
*context_ptr = malloc(sizeof(clock_state_t));
clock_state_t *state = (clock_state_t *) *context_ptr;
state->time_signal_enabled = false;
state->watch_face_index = watch_face_index;
}
}
void clock_face_activate(movement_settings_t *settings, void *context) {
clock_state_t *clock = (clock_state_t *) context;
clock_stop_tick_tock_animation();
clock_indicate_time_signal(clock);
clock_indicate_alarm(settings);
clock_indicate_24h(settings);
watch_set_colon();
// this ensures that none of the timestamp fields will match, so we can re-render them all.
clock->date_time.previous.reg = 0xFFFFFFFF;
}
bool clock_face_loop(movement_event_t event, movement_settings_t *settings, void *context) {
clock_state_t *state = (clock_state_t *) context;
watch_date_time current;
switch (event.event_type) {
case EVENT_LOW_ENERGY_UPDATE:
clock_start_tick_tock_animation();
clock_display_low_energy(watch_rtc_get_date_time());
break;
case EVENT_TICK:
case EVENT_ACTIVATE:
current = watch_rtc_get_date_time();
clock_display_clock(settings, state, current);
clock_check_battery_periodically(state, current);
state->date_time.previous = current;
break;
case EVENT_ALARM_LONG_PRESS:
clock_toggle_time_signal(state);
break;
case EVENT_BACKGROUND_TASK:
// uncomment this line to snap back to the clock face when the hour signal sounds:
// movement_move_to_face(state->watch_face_index);
movement_play_signal();
break;
default:
return movement_default_loop_handler(event, settings);
}
return true;
}
void clock_face_resign(movement_settings_t *settings, void *context) {
(void) settings;
(void) context;
}
bool clock_face_wants_background_task(movement_settings_t *settings, void *context) {
(void) settings;
clock_state_t *state = (clock_state_t *) context;
if (!state->time_signal_enabled) return false;
watch_date_time date_time = watch_rtc_get_date_time();
return date_time.unit.minute == 0;
}