2cc674c24d
* Added TGR Alice keyboard support This keyboard uses ps2avrGB firmware, so I used the same matrix Bootmapper Client was using and was able to flash it appropriately. * Refactor alice to use QMK core * Fixed markdown line breaks on TGR Alice readme
1.9 KiB
TGR Alice
An ergonomic 60% keyboard.
Keyboard Maintainer: Felipe Coury
Hardware Supported: TGR Alice
Hardware Availability: Group buy finished
Make example for this keyboard (after setting up your build environment):
make alice:default
See build environment setup then the make instructions for more information.
ps2avrGB keyboard firmware
This keyboard uses the port of the QMK firmware for boards that are based on the ps2avrGB firmware.
Note that this is a complete replacement for the firmware, so you won't be using Bootmapper Client to change any keyboard settings, since not all the USB report options are supported.
Installing
First, install the requirements. These commands are for OSX, but all you
need is the AVR toolchain and bootloadHID for flashing:
$ brew cask install crosspack-avr
$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
$ pip install pyusb
Then, with the keyboard plugged in, simply run this command from the
qmk_firmware directory:
$ make alice
$ bootloadHID -r alice_default.hex
Setting the board to bootloader mode
Hold the ESC key (the one before the 1! key, in case you remaped it).
Troubleshooting
From my experience, it's really hard to brick these boards. But these tricks have been useful when it got stuck in a weird scenario.
- Try plugging the board in while holding the bootloader key. This will force it to boot only the bootloader without loading the firmware. Once this is done, just reflash the board with the original firmware.
- Sometimes USB hubs can act weird, so try connecting the board directly to your computer or plugging/unplugging the USB hub.