mirror of
https://github.com/firewalkwithm3/qmk_firmware.git
synced 2024-11-22 19:40:29 +08:00
424b9ff709
* rename LAYOUT_default to LAYOUT_all * apply human-friendly formatting to info.json * correct keyboard dimensions * correct data for LAYOUT_tsangan * add labels to LAYOUT_ansi data * add labels to LAYOUT_all data * add labels to LAYOUT_iso data * crin.h: update grid alignment of matrix identifiers * crin.h: add matrix diagram * physically position matrix identifiers for LAYOUT_all - move k2d to top row (right half of split Backspace) - move k41 to fourth row (right half of split Left Shift [KC_NUBS]) * physically position matrix identifiers for LAYOUT_iso - move k1d to top row ([KC_NUHS]) - add k41 to fourth row ([KC_NUBS], previously missing) * refactor keymaps - grid-align keycodes - use four-space indent * correct data for LAYOUT_iso - move Enter key to home row * rename LAYOUT_tsangan to LAYOUT_ansi_tsangan * add LAYOUT_iso_tsangan * update readme.md - add `make` command for building - add "Flashing example..." - touch-up bootloader jump instructions (previous Markdown didn't render ideally on GitHub) * extend keymap functionality - add Grave Accent, Function keys, Print Screen, Scroll Lock and Pause keycodes to keymaps - add RESET keycode (Fn+R) - use KC_RGHT for Right arrow * touch-up bootloader instructions on readme - note that Bootmagic Lite jump erases persistent settings - note that Fn+R is RESET keycode by default
25 lines
1 KiB
Markdown
25 lines
1 KiB
Markdown
# Bachoo Crin
|
|
|
|
Crin is an F-rowless 65%.
|
|
|
|
* Keyboard Maintainer: [KnoblesseOblige](https://github.com/KnoblesseOblige)
|
|
* Hardware Supported: STM32F303CBT
|
|
* Hardware Availability: TBD
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make crin:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make crin:default:flash
|
|
|
|
To reset the board into bootloader mode, do one of the following:
|
|
|
|
* Hold Esc while plugging the PCB in, if Bootmagic Lite is enabled (also erases persistent settings).
|
|
* Press the RESET keycode, if programmed on the keymap (Fn+R by default).
|
|
* Slide the switch just below the reset button to the left and press the reset button.
|
|
* Please note that you must slide it back to the right for the PCB to boot QMK again.
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|