* Metronome Complication
A simple metronome complication that allows user to set BPM, toggle sound, and set counts per measure.
* silence warnings in metronome_face
* avoid mode button in metronome settings, other tweaks
---------
Co-authored-by: joeycastillo <joeycastillo@utexas.edu>
Merge the next branch containing numerous new sensor watch faces
as well as some new features. Not all of them made it in the end
and we even had to revert improvements merged in last next due to
issues that weren't found during testing. Still, I am very proud
to be merging in and closing over 20 pull requests.
I believe the project is in the best possible shape it can be
before the movement 2.0 refactor.
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
Tested-on-hardware-by: David Volovskiy <devolov@gmail.com>
Tested-on-hardware-by: CarpeNoctem <cryptomax@pm.me>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/469
The DST code has not yet been fully tested, the upcoming movement
refactor is upon us and it will integrate with the micro timezone
library anyway. Revert it so that next can be merged into main.
This reverts commit 5a8a49a8c7, reversing
changes made to bfadb81e82.
The DST code has not yet been fully tested, the upcoming movement
refactor is upon us and it will integrate with the micro timezone
library anyway. Revert it so that next can be merged into main.
This reverts commit 3c86a42aa8, reversing
changes made to be969c4deb.
The DST code has not yet been fully tested, the upcoming movement
refactor is upon us and it will integrate with the micro timezone
library anyway. Revert it so that next can be merged into main.
This reverts commit ac5bf8cfce, reversing
changes made to 5a8a49a8c7.
The DST code has not yet been fully tested, the upcoming movement
refactor is upon us and it will integrate with the micro timezone
library anyway. Revert it so that next can be merged into main.
This reverts commit 0cc28b9811, reversing
changes made to 337864eb54.
There was an issue where the clock's display would remain in 024h mode
even after switching back to 12h/24h mode because it only took into
account the leading zero bit, whose value is meaningless unless the
24h mode bit is also set.
The issue is fixed by taking both bits into account.
Closes#476.
Reported-by: CarpeNoctem <cryptomax@pm.me>
GitHub-Issue: https://github.com/joeycastillo/Sensor-Watch/issues/476
There was an issue where the simple clock's display would remain in
024h mode even after switching back to 12h/24h mode because it only
took into account the leading zero bit, whose value is meaningless
unless the 24h mode bit is also set.
The issue is fixed by taking both bits into account.
Closes#476.
Reported-by: CarpeNoctem <cryptomax@pm.me>
GitHub-Issue: https://github.com/joeycastillo/Sensor-Watch/issues/476
The watch was not indicating to the user that it was in 24h mode
when set to the leading zero 024h time format. This could lead
to ambiguity and confusion, so make sure to indicate 24h mode.
Closes#476.
Reported-by: CarpeNoctem <cryptomax@pm.me>
GitHub-Issue: https://github.com/joeycastillo/Sensor-Watch/issues/476
This reverts commit a715265af6, reversing
changes made to 9c093f9540.
Insidious issues were found in the course of long term testing
by the community, and further reviews of the code were not enough
to pinpoint the issue and fix it. So for now the appropriate action
is to revert these changes while development continues, and possibly
merge them back in once they have been stabilized.
Tested-on-hardware-by: David Volovskiy <devolov@gmail.com>
Tested-on-hardware-by: CarpeNoctem <cryptomax@pm.me>
Tested-on-hardware-by: Krzysztof Gałka <@kshysztof@Discord>
This reverts commit a715265af6, reversing
changes made to 9c093f9540.
Insidious issues were found in the course of long term testing
by the community, and further reviews of the code were not enough
to pinpoint the issue and fix it. So for now the appropriate action
is to revert these changes while development continues, and possibly
merge them back in once they have been stabilized.
Tested-on-hardware-by: David Volovskiy <devolov@gmail.com>
Tested-on-hardware-by: CarpeNoctem <cryptomax@pm.me>
Tested-on-hardware-by: Krzysztof Gałka <@kshysztof@Discord>
The new DST changes caused problems in one specific face - world_clock2.
An incorrect variable was used due to a confusing name.
It has been revised to fix the problems that were caused.
Closes#475.
Reported-by: CarpeNoctem <cryptomax@pm.me>
Fixed-by: David Volovskiy <devolov@gmail.com>
Tested-by: CarpeNoctem <cryptomax@pm.me>
Tested-on-hardware-by: CarpeNoctem <cryptomax@pm.me>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/470
GitHub-Issue: https://github.com/joeycastillo/Sensor-Watch/issues/475
This commit caused state restored from backup registers
to be overwritten. It is thereby reverted until a better
solution is found or movement is refactored.
This reverts commit 524098b925.
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
References: https://github.com/joeycastillo/Sensor-Watch/pull/474
PR #386 did not add the C file to the makefile,
causing the build to fail at the link stage
due to the missing object file and the symbols
that were supposed to be provided by it.
Adding the file to the build fixes#472.
Reported-by: CarpeNoctem <cryptomax@pm.me>
Fixed-by: CarpeNoctem <cryptomax@pm.me>
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
GitHub-Issue: https://github.com/joeycastillo/Sensor-Watch/issues/472
Adds the ability to tally negative counts, tally quickly by holding down
the buttons as well as the ability to enable and cycle through multiple
preset initial values for numerous contexts such as card games.
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/430
Implements automatic DST data to the sunrise/sunset presets,
making the whole system more automatic and therefore more reliable.
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/471
Creates a macro that returns the size of the presets array,
converting it into a compile time constant value that occupies
no memory and that compilers can constant fold into other expressions
potentially leading to dead code elimination.
Fix issue where the calculator face's user interface display
was delayed about a quarter second due to the activation event
being a no-op.
Tested-by: David Volovskiy <devolov@gmail.com>
Reported-by: David Volovskiy <devolov@gmail.com>
Fixed-by: David Volovskiy <devolov@gmail.com>
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/454
Implements logic to automatically offset daylight saving time settings
when calculating timezone offsets. This should make the DST functions
work automatically with no need for user input in most cases.
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/470
Adds a toggle in the preferences face that allows the user
to enable or disable the daylight savings time.
Should help produce the correct results with the sunrise/sunset presets.
A proper solution would be to integrate the tzinfo database
but it's too big for the watch at the time of this writing.
Can't be done unless it can be shrunk down into a subset
the user would be interested. Even then it's a stopgap
since the database is likely to keep growing over time.
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/268
Displays the time in a "close enough" manner:
periods of five minutes, relative to the nearest hour.
For example:
- 3:24 -> 25 past 3
- 3:50 -> 10 to 4
- 3:59 -> 4 o'clock
- 1:35 -> 35 past 1
- 1:50 -> 10 to 2
- 2:00 -> 2 o'clock
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
Tested-on-hardware-by: Ruben Nic <RubenSandwich@users.noreply.github.com>
Tested-on-hardware-by: KlingonJane <148595159+KlingonJane@users.noreply.github.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/401
Measures the temperature until it stabilizes for half a minute.
This watch face is not meant to diagnose, treat, cure or prevent
any disease.
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/413
Keeps the LED turned on while the user is interacting with the watch.
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/394
Adds a watch face that allows playing the classic Simon game
with the watch's buzzer and RGB LED.
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/398
