Fix issue where the calculator face's user interface display
was delayed about a quarter second due to the activation event
being a no-op.
Tested-by: David Volovskiy <devolov@gmail.com>
Reported-by: David Volovskiy <devolov@gmail.com>
Fixed-by: David Volovskiy <devolov@gmail.com>
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/454
Implements logic to automatically offset daylight saving time settings
when calculating timezone offsets. This should make the DST functions
work automatically with no need for user input in most cases.
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/470
Adds a toggle in the preferences face that allows the user
to enable or disable the daylight savings time.
Should help produce the correct results with the sunrise/sunset presets.
A proper solution would be to integrate the tzinfo database
but it's too big for the watch at the time of this writing.
Can't be done unless it can be shrunk down into a subset
the user would be interested. Even then it's a stopgap
since the database is likely to keep growing over time.
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/268
Displays the time in a "close enough" manner:
periods of five minutes, relative to the nearest hour.
For example:
- 3:24 -> 25 past 3
- 3:50 -> 10 to 4
- 3:59 -> 4 o'clock
- 1:35 -> 35 past 1
- 1:50 -> 10 to 2
- 2:00 -> 2 o'clock
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
Tested-on-hardware-by: Ruben Nic <RubenSandwich@users.noreply.github.com>
Tested-on-hardware-by: KlingonJane <148595159+KlingonJane@users.noreply.github.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/401
Measures the temperature until it stabilizes for half a minute.
This watch face is not meant to diagnose, treat, cure or prevent
any disease.
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/413
Keeps the LED turned on while the user is interacting with the watch.
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/394
Adds a watch face that allows playing the classic Simon game
with the watch's buzzer and RGB LED.
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/398
Adds a french revolutionary time watch face which displays the time
divided into ten hours of one hundred minutes each which are in turn
divided into one hundred seconds each.
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
Reviewed-by: Wesley Aptekar-Cassels <me@wesleyac.com>
Reviewed-by: Alex Maestas <git@se30.xyz>
Tested-on-hardware-by: CarpeNoctem <cryptomax@pm.me>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/269
Adds a watch face that implements a game where the player
must guess if the next card will be higher or lower than
the last cards that have been revealed.
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
Tested-on-hardware-by: Chris <chris.ellis.git.dev@gmail.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/259
Adds a timing watch face that focuses on
keeping track of specific deadlines.
Dates and times can be set on the watch face
and it will display the time remaining at ever
decreasing levels of granularity for the sake
of brevity and ease of understanding.
For example, it will display years and months if over a year is left,
months and days if less than one year is left,
days and hours if less than one month is left
and the full remaining time if less than a day is left.
It also notifies the user when a deadline has passed recently.
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
Tested-on-hardware-by: Konrad Rieck <konrad@mlsec.org>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/266
The alarm for deadlines is now handled via a background task. Instead of a scheduled task that prevents sleep mode, the face checks in the background every minute whether an deadline is due. If this is the case, the face wakes up from sleep mode and starts a scheduled task for the remaining seconds.
- A background task is only scheduled if the alarm option is activated. If the option is enabled, an alarm sounds when the next deadline is reached. If the option is disabled, no alarm sounds and the watch can enter low energy sleep.
- Fixed tick frequency error. During running mode, the clock ticks at 1Hz. This is set in the init function `_running_init` and thus ensures that we do not run too fast when returning from the setting mode.
- Minor corrections to comments and indentations.
Adds a watch face full of useful information
about every known chemical element.
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
Tested-on-hardware-by: PrimmR <primmr@icloud.com>
Tested-on-hardware-by: David Volovskiy <devolov@gmail.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/423
Adds the ability to automatically restart the timer
in the countdown watch face. This allows users to
easily time repeating events.
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/444
Add Harry Potter themed hourly signal chimes, short and long variants.
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/467
Adds an instant LED duration preference that only keeps the LED lit
while the LIGHT button remains held down.
Matches the behavior of the original watch.
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
Tested-on-hardware-by: Wesley Aptekar-Cassels <me@wesleyac.com>
Tested-on-hardware-by: 814d3 (GitHub)
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/293
Adds an endless runner game face to the Sensor Watch.
The player character runs endlessly towards the right.
An endless number of obstacles speed towards him.
The player must jump over them or lose the game
when the player character runs smack into the obstacle.
Jumping requires fuel which is a limited resource
that must be managed by the player.
Features selectable difficulties and high score tracking.
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/419
Ports the famous Wordle game to the Sensor Watch.
A random 5 letter word is chosen and the player must guess it
without exceeding the configured maximum number of attempts.
Letters guessed correctly will stay in place.
Letters present in the word but in the wrong place will blink.
Streak tracking is supported and compile time configurable.
A Python script which finds an optimal dictionary is also included
and can be used to further customize the watch face.
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/436
Adds a movement-wide leading zero 024h representation mode
that's toggleable in the preferences watch face.
Also adds support for the new display mode to existing faces.
I modified the logic a bit to ensure the 24h indicator remains lit
in the simple clock face even when in 024h mode. I also added support
to the more advanced clock face. In the future I will add a compile time
toggle to it as well.
Reviewed-by: Matheus Afonso Martins Moreira <matheus@matheusmoreira.com>
GitHub-Pull-Request: https://github.com/joeycastillo/Sensor-Watch/pull/299
